Author Topic: Yota axle hardware, hubs, knuckles, spindles, calipers, chebby 44 / 12b combo  (Read 1900 times)

0 Members and 1 Guest are viewing this topic.

affende

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 1
  • Male Posts: 115
  • Member since Jan '06
  • I would do her IDB style...twice
    • View Profile
    • Affende.com
Everything is located in 24060 Blacksburg, Va …. I will ship everything here ON YOUR DIME … ACTUAL COST.   Discounts for 3 items or more ……
   
  I WILL NOT SHIP THE AXLES!!!!!!!!!!  I WILL NOT PART THE AXLES!!!! TIRES AND WHEELS STAY WITH THE AXLES UNLESS I HAVE PAYMENT FOR BOTH OF THEM!!!!!
   
   
-----unknown vendor toy 8" 1.5mm rubber diff gasket - reusable - $30 for the pair SOLD
-----brand new locking hub hardware kit - $40 ----- SOLD
-----knuckles - $65 ----- SOLD
----- 4 x new steering studs with e-12 head ... $5 SOLD
   
   
  -----new-used hub hardware kit - $25 -----
  12 used toyota hub cone washers
  12 new class 8 lock washers
  12 new class 8 nuts
   
 
   
   
  -----8 x used factory toyota hub studs - $5 (threads are of unknown condition, some are good, some are bad)
   
 
   
   
  -----steering arm hardware kit - all new - $30  ($40 from marlin + shipping)
  8 x stud nut
  8 x stud split washer
  8 x cone washer ... + 2 cone washers for a total of 10 ... added a few for droppage on the trail!!!
   
 
   
   
  -----steering arm hardware kit - used cone washers - $15
  8 x stud nut
  8 x split washer
  8 x used cone washer (factory toyota ... some are mangles around the split where they were removed with a screwdriver)
   
 

   
   
  -----14 factory steering studs, used - $5
   
 
   
  ----- spindles – These have surface rust from being out in the garage for the last year and a half.  .---- $65 for the spindles
   
 
   
  ----- IFS calipers – worked when pulled – good paint on them (high temp caliper paint)----- $50 for the set
   
 
   
  ----- yota SA wheel hubs: new hub studs, they were wirewheeled, primer etched, and painted with high temp paint... needs bearings, no rotors. $50
   
 
   
  ----- pair of axles out of a mid 70s chebby .... 44 front and 12b rear, 354 ratio i believe

both axles are rollers with wheels and 35 MTs ... tires are bald, only good for spares, two leak slowly ... tires are free pretty much, you have been warned about the tires.

Front chebby 44 with the often sought after flat top knuckles, complete from wheel to wheel with push pull drag link still attached. junk yard condition, spins freely. $400

rear 12b, complete from drum to drum, still has most if not all brackets. $200

both of these came out of a running truck ...


$550 for the set.

NO SHIPPING, NO PARTING ... dont ask.

located in blacksburg, va 24060
« Last Edit: Feb 20, 2008, 02:57:03 PM by affende »
Please excuse my grammar and spelling, im from Virginia.

affende [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 1
  • Male Posts: 115
  • Member since Jan '06
  • I would do her IDB style...twice
    • View Profile
    • Affende.com
Please excuse my grammar and spelling, im from Virginia.

hansi530

  • Trade Count: (0)
  • Offline Crawler Guru
  • ****
  • Turtle Points: 4
  • Male Posts: 412
  • Member since Sep '10
    • View Profile
will you ship the spindles to 96161 on my cost
88 custom cab: http://board.marlincrawler.com/index.php?topic=88026.new#new
shitlbuffout-A saying among 4x4 and off road enthusiasts. Its said after damage normally cosmetic to minor parts damage has occurred on there rig or vehicle. Shitlbuffout is :pokinit: will buff out as in the :pokinit: being the damage will buff as in painted over cleaned polished or "buffed" out.

thegoofster21

  • Trade Count: (0)
  • Offline The 1.5K Club
  • **
  • Turtle Points: 1
  • Male Posts: 1,644
  • Member since Mar '08
  • HIT IT HARD!!!
    • View Profile
check when post started and when the last one was posted ITS OVER 3 YEARS OLD!
Any guy who takes his woman wheeling enjoys her. A woman who is owned is left at home to cook, clean, and keep beer cold. So if this offends you you should stop looking and go have some tacos.    :rofl2: And a beer. If your old enough.   :beerchug:   :beer:

04 Tacoma 33s http://board.marlincrawler.com/index.php?topic=61454.0
jmoffroad.com

 
 
 
 
 

Related Topics

6 Replies
2399 Views
Last post Nov 08, 2005, 10:42:36 AM
by dj
12 Replies
2953 Views
Last post Oct 29, 2007, 10:43:15 PM
by 86bobbedtoy
3 Replies
1574 Views
Last post Jul 14, 2009, 05:38:44 PM
by Doof
3 Replies
1448 Views
Last post Sep 24, 2008, 11:58:40 AM
by halfxspaid
1 Replies
1247 Views
Last post Apr 23, 2011, 06:11:50 PM
by BoG-ToY