Author Topic: Phill's Chop Shop (87 2wd go fast build) (Read 107924 times)

boggerunner · « **Reply #30 on:** Feb 29, 2008, 09:29:39 PM »

im got the dual ultimate with the fror skidplate and crossmember installed last night

boggerunner · « **Reply #31 on:** Feb 29, 2008, 09:31:56 PM »

more, and one of the 4deez

boggerunner · « **Reply #32 on:** Feb 29, 2008, 09:34:16 PM »

the freshly painted valve cover

Gittinit · « **Reply #33 on:** Feb 29, 2008, 11:04:32 PM »

In those pics its easy to see what you were saying about not having a real shop. Your kinda cramped in there. I work out of my 1 car garage, but I have a little more room. I feel your pain.

boggerunner · « **Reply #34 on:** Mar 02, 2008, 10:24:55 AM »

yeah, the small ass garage sucks ass, but its better than workin out in the snow

boggerunner · « **Reply #35 on:** Mar 02, 2008, 10:30:54 AM »

last night we build a rear axle truss

boggerunner · « **Reply #36 on:** Mar 05, 2008, 04:38:54 PM »

i got a hummer h2 spare tire rack with d rings for free today, i might try to fit it on the 4runner

boggerunner · « **Reply #37 on:** Mar 05, 2008, 06:54:43 PM »

my buddy zack just bought an 86 turbo pickup for $500 it needs a new bed and drivers door, so when he is finished with the 87 excab he is going to clean this truck up and D.D. it.
i also found him a garret t04 turbo for the crawler that will fit his turbo header.
here are some pics of his 87 with the 7mgte/w56/dual 23spline cases

boggerunner · « **Reply #38 on:** Mar 05, 2008, 06:57:27 PM »

here are a few more, and my spare tire carrier

boggerunner · « **Reply #39 on:** Mar 06, 2008, 06:19:06 PM »

i was down at the local scrap yard and picked up this huge d-ring for $20 now i just need something to put it on

Birfailed · « **Reply #40 on:** Mar 07, 2008, 06:33:03 PM »

Dude, find another one and hang em side by side so they look like truck nutz

boggerunner · « **Reply #41 on:** Mar 08, 2008, 11:03:06 AM »

nahh, way too big for 2 of them

boggerunner · « **Reply #42 on:** Mar 08, 2008, 11:04:39 AM »

here is zacks new truck, 86 turbo pickup with a new turbo, we put a new grill bumper, marker lights and a new bed on it

SHSTL_82 · « **Reply #43 on:** Mar 09, 2008, 01:57:36 AM »

nice work dude. looks good...your old runner looked rad too!

boggerunner · « **Reply #44 on:** Mar 09, 2008, 11:23:21 AM »

thanks, its rollin around on 33 mtr's now. i had to replace the injectors for the kid a few weeks ago. but he barely drives it.

boggerunner · « **Reply #45 on:** Mar 09, 2008, 07:45:18 PM »

i got my 37/12.5/17 mtr's on the truck today

Stinky · « **Reply #46 on:** Mar 10, 2008, 08:06:21 PM »

Quote from: boggerunner on Mar 05, 2008, 06:57:27 PM

here are a few more, and my spare tire carrier

where'd ya pick up that spare carrier?? and what kind of hinge/latches are those??

ive been pondering over makin one, but im lost on a strong hinge n latch setup....

sorry for the thread jack....

boggerunner · « **Reply #47 on:** Mar 10, 2008, 09:18:34 PM »

i got it for free from my buddy who manages big O tires, some one came in with a hummer H2 and put it on 22's and didnt want the tire carrier and had his guys pull it off. so just find some ass clown blingin out his pile of crap hummer and tell him the tire carrier cant be chromed and he will probably give it to u

boggerunner · « **Reply #48 on:** Mar 19, 2008, 08:48:54 PM »

i helped my neihbor get his truck runnin. he spent days tryin to figure out why it would start and not keep runnin, i let him borrow some parts to try like the computer, coil/ ignitor, dist, injectors, but nothing worked. I finally went down there and unpluged the cruise plug from the ignitor, and plugged the motor harness into it, and it ran great, im still givin him

for it

boggerunner · « **Reply #49 on:** Mar 19, 2008, 08:52:53 PM »

i got my dual ultamints hung last week also

boggerunner · « **Reply #50 on:** Mar 19, 2008, 08:55:07 PM »

i also put most of my dash together, and im gettin closer to finishing chanceys 3 link

Yota87Truck · « **Reply #51 on:** Mar 19, 2008, 09:08:33 PM »

looking good, looks like ya still have some stuff laying around from the yellow 79

boggerunner · « **Reply #52 on:** Mar 19, 2008, 09:09:53 PM »

all the good parts, just scrapped the frame and body. i even kept the full cage

Jordan7118 · « **Reply #53 on:** Mar 19, 2008, 09:29:57 PM »

Quote from: boggerunner on Feb 24, 2008, 11:29:11 AM

finished another ifs hub conversion, and when chancey gets here with some locktite, i will install the arp hub studs

Would you mind elaborating on how you did this? It looks like you're using IFS rotors with a small wheel spacer. How'd you do that? Thanks for your help!

boggerunner · « **Reply #54 on:** Mar 19, 2008, 10:00:06 PM »

not too difficult, just need an aluminum 5/8" wheel spacer and drill it to match the holes on the ifs brake rotor, and get some longer bolts to install the spacer in betweet the rotor and hub body, here is a nice pic.
i still havent been able to find a 5/8" spacer, but ive been runnin a 1/2 spacer with 2 washers to get to 5/8". I have 5 trucks runnin around with this mod, and no failures yet, and it only costs about $60 for the spacers

Jordan7118 · « **Reply #55 on:** Mar 19, 2008, 10:09:13 PM »

Awesome, thanks!

boggerunner · « **Reply #56 on:** Mar 21, 2008, 08:04:45 PM »

no problem. I just got back from the moab jeep safari, lots of sweet yotas, and even more cops. i saw an awsome buggy rollover on tato salad. got lots of free swag from the vendor showcase, Randys ring and pinyon gave me a free differential book worth $30

Birfailed · « **Reply #57 on:** Mar 22, 2008, 09:05:03 AM »

Hey dude is somethin up with your phone? No gettin through. Anyways, I'm gonna come over. I was gonna go into moab this weekend but I talked to someone down there and i guess it's pretty packed. no bueno.

boggerunner · « **Reply #58 on:** Mar 24, 2008, 08:56:30 AM »

I put an allpro interior cage in mikes 88 4runnner yesterday, it turned out sweet, i will get some pics later. But right now im off to go pick up an 88 excab with a v6. we are gonna swap the motor into tommys 4runner, its a 92 with a sas and 36" iroks

boggerunner · « **Reply #59 on:** Mar 24, 2008, 08:58:01 PM »

here are some pics of the interior cage on mikes 4runner

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

boggerunner [OP]

Related Topics