Author Topic: will this work? (Read 1928 times)

muddenyota · « **on:** Feb 02, 2008, 11:44:31 AM »

can i use longs with a hi pinion elocker in the front of my mini truck housing or do i need the long splined inner axle

79coyotefrg · « **Reply #1 on:** Feb 02, 2008, 07:49:03 PM »

yes you use the regular longs in a regular hipinion elocker

muddenyota · « **Reply #2 on:** Feb 03, 2008, 06:38:29 AM »

why does long sell the long spline shafts then? i'm confused

muddenyota · « **Reply #3 on:** Feb 10, 2008, 11:44:44 AM »

any one

?

Hammerhead · « **Reply #4 on:** Feb 10, 2008, 04:16:44 PM »

Quote from: muddenyota on Feb 02, 2008, 11:44:31 AM

can i use longs with a hi pinion elocker in the front of my mini truck housing or do i need the long splined inner axle

What are you asking? The birfield doesn't touch the locker. The inner axle does...

70 Cam Guy · « **Reply #5 on:** Feb 10, 2008, 10:00:28 PM »

Quote from: muddenyota on Feb 03, 2008, 06:38:29 AM

why does long sell the long spline shafts then? i'm confused

... You can always call and confirm that with Longfield to be sure.

edited because of new information below

muddenyota · « **Reply #6 on:** Feb 17, 2008, 01:23:41 PM »

talked to someone at longs and they told me that they offer a kit for elockers in the front with long splined inner shaft for $20 extra then the reg 30 spline longs because the elocker wont fully unlock the motor will burn out eventually

70 Cam Guy · « **Reply #7 on:** Feb 17, 2008, 01:41:10 PM »

ok good to know. Big thanks for posting that because I'm setting up my front and rear axle for elockers. I'm going to edit my post so others don't read my stuff and get the wrong parts

Author Topic: will this work? (Read 1928 times)

muddenyota

will this work?

79coyotefrg

Re: will this work?

muddenyota [OP]

Re: will this work?

muddenyota [OP]

Re: will this work?

Hammerhead

Re: will this work?

70 Cam Guy

Re: will this work?

muddenyota [OP]

Re: will this work?

70 Cam Guy

Re: will this work?

Related Topics


	Author Topic: will this work? (Read 1928 times) 0 Members and 3 Guests are viewing this topic. muddenyota Rock Crawl'n Turtle Points: 1 Posts: 69 Member since Oct '07 will this work? « on: Feb 02, 2008, 11:44:31 AM » can i use longs with a hi pinion elocker in the front of my mini truck housing or do i need the long splined inner axle Logged 95 Hilux 98 3.4 TRD SuperCharged Marlin hd clutch 2in bl 5 inch Allpro SAS 85 axle 5150s Elockers Yukon 5.29s ORS Wires 30 spline Longs + IFS Hubgears Allpro sliders 37" MTRs OSC custom bumpers http://www.oceanstatecrawlers.com/OSC/ 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: will this work? « Reply #1 on: Feb 02, 2008, 07:49:03 PM » yes you use the regular longs in a regular hipinion elocker Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way muddenyota [OP] Rock Crawl'n Turtle Points: 1 Posts: 69 Member since Oct '07 Re: will this work? « Reply #2 on: Feb 03, 2008, 06:38:29 AM » why does long sell the long spline shafts then? i'm confused Logged 95 Hilux 98 3.4 TRD SuperCharged Marlin hd clutch 2in bl 5 inch Allpro SAS 85 axle 5150s Elockers Yukon 5.29s ORS Wires 30 spline Longs + IFS Hubgears Allpro sliders 37" MTRs OSC custom bumpers http://www.oceanstatecrawlers.com/OSC/ muddenyota [OP] Rock Crawl'n Turtle Points: 1 Posts: 69 Member since Oct '07 Re: will this work? « Reply #3 on: Feb 10, 2008, 11:44:44 AM » any one ? Logged 95 Hilux 98 3.4 TRD SuperCharged Marlin hd clutch 2in bl 5 inch Allpro SAS 85 axle 5150s Elockers Yukon 5.29s ORS Wires 30 spline Longs + IFS Hubgears Allpro sliders 37" MTRs OSC custom bumpers http://www.oceanstatecrawlers.com/OSC/ Hammerhead Crawler Guru Turtle Points: 100 Posts: 564 Member since Nov '04 Junkyard Dog Re: will this work? « Reply #4 on: Feb 10, 2008, 04:16:44 PM » Quote from: muddenyota on Feb 02, 2008, 11:44:31 AM can i use longs with a hi pinion elocker in the front of my mini truck housing or do i need the long splined inner axle What are you asking? The birfield doesn't touch the locker. The inner axle does... Logged '82 pickup, +3, locked, doubled '82 pickup, IFS long travel, V8 '85 4runner, V8 rock crawler '88 X-cab, V6 70 Cam Guy Rock Crawl'n Turtle Points: 4 Posts: 115 Member since Apr '07 Re: will this work? « Reply #5 on: Feb 10, 2008, 10:00:28 PM » Quote from: muddenyota on Feb 03, 2008, 06:38:29 AM why does long sell the long spline shafts then? i'm confused ... You can always call and confirm that with Longfield to be sure. edited because of new information below « Last Edit: Feb 17, 2008, 01:42:11 PM by 70 Cam Guy » Logged Andy 87 SAS Build thread http://board.marlincrawler.com/index.php?topic=33188 muddenyota [OP] Rock Crawl'n Turtle Points: 1 Posts: 69 Member since Oct '07 Re: will this work? « Reply #6 on: Feb 17, 2008, 01:23:41 PM » talked to someone at longs and they told me that they offer a kit for elockers in the front with long splined inner shaft for $20 extra then the reg 30 spline longs because the elocker wont fully unlock the motor will burn out eventually Logged 95 Hilux 98 3.4 TRD SuperCharged Marlin hd clutch 2in bl 5 inch Allpro SAS 85 axle 5150s Elockers Yukon 5.29s ORS Wires 30 spline Longs + IFS Hubgears Allpro sliders 37" MTRs OSC custom bumpers http://www.oceanstatecrawlers.com/OSC/ 70 Cam Guy Rock Crawl'n Turtle Points: 4 Posts: 115 Member since Apr '07 Re: will this work? « Reply #7 on: Feb 17, 2008, 01:41:10 PM » ok good to know. Big thanks for posting that because I'm setting up my front and rear axle for elockers. I'm going to edit my post so others don't read my stuff and get the wrong parts Logged Andy 87 SAS Build thread http://board.marlincrawler.com/index.php?topic=33188