big tire small truck!!

[ghetto_wheeler]

i hadc 33s on it they fit fine i got 37s for real cheap but the tires are hella close to the body (pics below) will a body lift fix this or you think i should get out the old saw zaw 

[ghetto_wheeler]

picture make it hard to see but its like an inch from the tire

[Talon84x4]

Sawzall  , I did the same thing and have the same problem on the rear

[ghetto_wheeler]

thing is i got a body lift but i wanna keep it kinda low

[brainlessfool]

sawzall

[kneedownnate]

sawzall

[46&2]

sawzall

x3, a small body lift (1-2") is okay but in this instance I would say the sawzall is a better choice.

[Ramrod]

I would prefer a grinder with cutoff wheel for a clean cut

[Ramrod]

and a big ass hammer for the firewall in the front!

[jimbo74]

you said you wanted to keep it low. bust out the sawzall and sledge

[ghetto_wheeler]

i really just am tryin not to be rollin every day

[MiniSimp]

F' Body lifts, Sawzall only! And maybe a little tap with a BFH.

[Doof]

if you want to keep it low why put on another lift? (body lift)

its easy to clearance the fenders, just dont cut to deep on accident

[lilbuddy]

its easy to clearance the fenders

Him and I clearanced mine at rubicon with a big ax and small sledge hammer

just dont cut to deep on accident

If you have any questions regarding cutting too deep on accident, ask that guy



JK buddy

[Doof]

 


axe clearance is easy and fun...just flex your shiz out and beat away after you cut. but you need to round the edges when you beat so it folds together.... just exeriment and find it your way if you do it

[NT-OUTBACK]

I think you need to step back and ask yourself what you are doing. You stated in another thread you're "not a hardcore wheeler" and I guess that is evident here as you put 37 inch tires on before the lift. So before you bust out the saw or grinder think about what you're doing. I don't even want to know if this beast has been geared and the front axle beefed up, but crawling planter boxes at the mall is not the stressful. 

[ghetto_wheeler]

  thats better than words but it has a lift on it and ya its geared it just didnt have enough to fit the 37s i fixed it with an inch body thanks

[MiniSimp]

I think you need to step back and ask yourself what you are doing. You stated in another thread you're "not a hardcore wheeler" and I guess that is evident here as you put 37 inch tires on before the lift. So before you bust out the saw or grinder think about what you're doing. I don't even want to know if this beast has been geared and the front axle beefed up, but crawling planter boxes at the mall is not the stressful. 

What is wrong with 37's, no lift, and stock front axle parts? That's what I'm runnin....

[ghetto_wheeler]

i think he just likes to talk 

[ghetto_wheeler]

he was at the mall gettin it over this huge speed bump

[ghetto_wheeler]

sorry that was out of line, but like momma always said if you dont have something nice to say dont say it!!!