=THE 1 TON DADDY=

[4DEES]

 I'm currently waiting on my hubs to be machined, so I've been gathering all the little stuff I need 


Got my tube adapters (inserts) for my tie rod & draglink from Ballistic Fab 



Also went and had my Toy/Chevy brakelines made today

[snowshoebrue]

who made the lines and how much did they set you back

[4DEES]

who made the lines and how much did they set you back

This Place In Ontario, (SoCal) Called G&J , I've Had Brakelines Made By Them Before. He Had These Done In Like 10 minutes,

[snowshoebrue]

cool thanks    how long are they? 

[4DEES]

cool thanks    how long are they? 

27 Inches from end to end, I got them made the same as my existing lines. Let me know if you end up going with G&J and i could help with getting them for you, I'm gonna be back by there to get my rear made either this week or next week.

[4DEES]

 Went and picked up a 4Runner top off of my buddy this weekend, gonna cut it up and use the top portion of it for my bed cage


Picked up my rear 14 bolt as well 


Also, went and picked up my flange for my front 60 from Inland Empire Driveline ( www.iedls.com ) , all I have to do is re-drill it for the toyota pattern. This way i don't have to mess with my front square shaft, just install the flange on my 60 

[kiyul4130]

hey i searched the site and found nothing on that toy/60 flange. how much are they selling them for? i already have one from high angle, was just wondering.

[TIMS89CRAWLER]

hell ya man thats tight! what d-shaft is the flange drilled for now?

[Hyena]

This Place In Ontario, (SoCal) Called G&J , I've Had Brakelines Made By Them Before. He Had These Done In Like 10 minutes,

G&J Aircraft?  i had mine built by then also.

[4DEES]

hey i searched the site and found nothing on that toy/60 flange. how much are they selling them for? i already have one from high angle, was just wondering.

I don't know why they don't advertise it, It's not meant for a toy driveshaft though I need to drill it out for the toy pattern but that's not a big deal at all. They run about half of the High angle flange, and they are down the street from me so I went with it.

hell ya man thats tight! what d-shaft is the flange drilled for now?

That pattern is to go from a dana 60 to a ford driveshaft, but the toy pattern fits perfect between the ford pattern. Beefy !!!

G&J Aircraft?  i had mine built by then also.

Yup that's them! They do good work and in good time!

[kiyul4130]

I don't know why they don't advertise it, It's not meant for a toy driveshaft though I need to drill it out for the toy pattern but that's not a big deal at all. They run about half of the High angle flange, and they are down the street from me so I went with it.

thats cool. ya, good idea. it would only take minutes to drill some new holes threw it. i got lucky with mine. i bought it used (never been ran) from someone off line for $80. i was pretty stoked.

[Rockwieser]

what leaf springs you have on this beast bro? and what length shock. looks nice. and what size krawlers?

[4DEES]

thats cool. ya, good idea. it would only take minutes to drill some new holes threw it. i got lucky with mine. i bought it used (never been ran) from someone off line for $80. i was pretty stoked.

Damn that's cool dude, $80 was a good price for that. Especially since it wasn't ran before.

what leaf springs you have on this beast bro? and what length shock. looks nice. and what size krawlers?

5" All-Pro's front and rear. 16" travel bilstein's in the front, none in the rear. Those krawlers were the 39" red labels.

[Ramrod]

16" bilstiens? when did they start making those?

[4DEES]

16" bilstiens? when did they start making those?

  They actually STOPPED making them. They are the old school yellow ones and have a tiny hiem at each end. I just painted them black cause yellow looked a little gay.

[4DEES]

 Got both my axles hung on the truck





Also, after running around with these damn dually hubs and trying to figure out the best place to machine them, I said f*ck it and bought some brand new SRW hubs 

[Lizard_lips]

Excellent choice. I did the same thing and I was very easy to do.

[TIMS89CRAWLER]

hell ya man thats pimp! thing is gonna look sick on the tons....

[rednk1980]

 

[4DEES]

 Thanks guys 


Got my rear rims and tires mounted on the truck

No side shots yet 


Also ordered up my front wheel studs which will be here tomorrow so I'll be able to put the front back together and mount my front tires as well 

[rednk1980]

sickness 

[Jud]

I missed it.

42" IROCs?

[4DEES]

I missed it.

42" IROCs?

Yup, on re-centered H1's

[TIMS89CRAWLER]

hell ya bro looks ballin!

[4DEES]

sickness 

Thanks a lot brotha!

hell ya bro looks ballin!

Appreciate it!! Hopefully I can get my front end together tomorrow and slap the front tires on there, I'll post pics for sure.

[TIMS89CRAWLER]

sweet brotha lookin forward to it

[iNfErNaL]

Hey I have a cel phone side shot  . . . The Daddy is looking disgusting bro  . It's looking sick for sure man , I'm loving it . Get to workin' dog , get that thing done tomorrow so that we can see it on all 4s 

[gotrocks]

You changing to 42 Iroks?  BTW looking good.  Welcome to the 1 ton club.

[4DEES]

 Thanks for the props guys 


And boy am I glad I didn't go to KOH with the rest of the Brawlers! Got my hubs mounted,mounted my last wheel on the tire, and mounted all the tires on the rig 

[pumkin toy]

damn what a beast!!  looks pretty badass