Author Topic: Built toy axles Norcal, springs, gas tank (Read 4390 times)

Hyena · « **on:** Oct 08, 2007, 10:06:15 AM »

Front is out of a 1982. Bottom gusset cut offf and welded on the top. Bottom of housing has been clearanced/shaved. TG built third member with 5.29's, and spool and triple drilled flange (New back in April). Marlin Highsteer with hydrolic assist steering (complete with box, lines and ram). ARP knuckle studs. ARP hub studs (new in April). Complete Rebuild kit in April with new wheel bearings. 30 Spline Longfields (birfs are new back in April, shafts are older) 1 1/2 inch wheel spacers. Marlin heavy duty inner axles seals. setup for leaf springs.

Rear is from an 86. Bobby Long cryoed Yukon 5.29 gears. Welded. housing has been clearanced/shaved. setup for a four link but still has the spring perches.

Will not part out. SOLD I have well over $3500 into these axles with many parts not even half a year old.

Front leaf springs. Custom pack gives about 3-4 inches of lift. Have had these on for almost 3 years now. haven't lost any lift and flex amazingly. needs new bushings. made up of rear toyota springs, a chevy leaf and waggy springs. 1 spring has a broken center pin. $100

2 inch wheel spacers Sold

Stock 84 extra cab carb gas tank. no dents. FREE

All of these are still on the truck except the gas tank. The axles have to be sold first, if they do not sell then nothing is sold. Located in Sacramento, California

before 4 link

jimbo74 · « **Reply #1 on:** Oct 08, 2007, 10:32:05 AM »

slick setup, i like your limiting straps

toy4x4ota · « **Reply #2 on:** Oct 08, 2007, 06:22:00 PM »

so i can assume you are trying to do the 1 ton swap?

Thomas P · « **Reply #3 on:** Oct 08, 2007, 07:34:18 PM »

are you interested in trade fo full width axles? I have a dana 44, and a chrysler 9.25 inch out of a dodge both with welded spiders, and I forget the gears......... i aslo have a rear 8 lug dana 60 from a scout

Hyena · « **Reply #4 on:** Oct 08, 2007, 07:51:50 PM »

Quote from: 1985efiyota on Oct 08, 2007, 07:34:18 PM

are you interested in trade fo full width axles? I have a dana 44, and a chrysler 9.25 inch out of a dodge both with welded spiders, and I forget the gears......... i aslo have a rear 8 lug dana 60 from a scout

I am looking for 60's front and rear. A rear stock 60 is only worth a couple hundred dollars though.

Thomas P · « **Reply #5 on:** Oct 08, 2007, 09:08:10 PM »

well do you want it? make an offer, it doesnt have a carrier, i would trade you for your hydro assist and box, i could give you another ifs box that doesnt leak to replace your tapped one...... well if you decide to part stuff out

Hyena · « **Reply #6 on:** Oct 08, 2007, 10:13:50 PM »

I am not going to part it out. is that a full floating 60?

toyotaexo · « **Reply #7 on:** Oct 08, 2007, 10:24:10 PM »

i got a dana 60 front axle stock unknown gears for sale? not sure what they go for out in nor cal

Ramrod · « **Reply #8 on:** Oct 09, 2007, 05:33:01 PM »

someone needs these things this is the best of the best you can get for a toyota axle and you'll save yourself some major time and money buying this setup and never have to worry about it. These things take a beating

Thomas P · « **Reply #9 on:** Oct 09, 2007, 09:17:44 PM »

how do i know if it is a full floater?

Hyena · « **Reply #10 on:** Oct 09, 2007, 09:45:07 PM »

a toyota would be a semi float design. a full float would be like a hub type thing. with 6-8 bolts and a flange. the axle is attached to the flange.

Thomas P · « **Reply #11 on:** Oct 09, 2007, 10:29:58 PM »

my 60 has the 8 lugs for the wheel to mount to, then it tapers off to a hub looking thing that has 6 bolts and sticks out about 3.5 to 4 inches, so that makes it a full floater right?

Total Distorsion · « **Reply #12 on:** Oct 09, 2007, 11:18:40 PM »

Yes.

Hyena · « **Reply #13 on:** Oct 13, 2007, 06:21:46 PM »

Offers?

Shamb · « **Reply #14 on:** Oct 13, 2007, 08:57:49 PM »

good luck Hyena, if these axles can take your abuse then they can take anything!

I wish I had use for these!!

Hyena · « **Reply #15 on:** Oct 14, 2007, 09:37:32 AM »

Thanx Shayne! they held up the last 3 or 4 trips. i was happy with them for once.

New price $2750 OBO!

Doof · « **Reply #16 on:** Oct 14, 2007, 06:03:58 PM »

if i had the money i would buy it all off you...sry this isnt helping you much. and if it got your hopes up sry

TRACKER · « **Reply #17 on:** Oct 14, 2007, 10:10:07 PM »

i'm interested in the wheel spacers . .. someone please buy his axles

Hyena · « **Reply #18 on:** Oct 15, 2007, 09:20:01 PM »

offers?

crawler92 · « **Reply #19 on:** Oct 16, 2007, 07:49:01 PM »

I'm interested in the springs whenever your ready to sell them.

KELLEYALS · « **Reply #20 on:** Oct 16, 2007, 11:23:05 PM »

Arent all 60s full floaters?

?

Duffil · « **Reply #21 on:** Oct 16, 2007, 11:32:54 PM »

Quote from: Bewarethebeast87 on Oct 16, 2007, 11:23:05 PM

Arent all 60s full floaters??

no. there are semi float versions.

wishin4atoy · « **Reply #22 on:** Oct 18, 2007, 01:39:43 PM »

im interested in the U bolts

Jordan7118 · « **Reply #23 on:** Oct 18, 2007, 08:01:13 PM »

I'd be interested in the hydro assist and possibly box if you decide to split some of it up. Shipping would be to 72701. Thanks!

Hyena · « **Reply #24 on:** Oct 20, 2007, 02:18:08 PM »

reduced price

Hyena · « **Reply #25 on:** Oct 26, 2007, 06:13:34 PM »

Axles and front u-bolt flip are sold.

Doof · « **Reply #26 on:** Oct 26, 2007, 06:38:50 PM »

congrats...who ever got those has their

made in the shade now

inmyownsummerami · « **Reply #27 on:** Oct 26, 2007, 07:01:58 PM »

Awesome

So ya got 60s under it yet

Hyena · « **Reply #28 on:** Oct 26, 2007, 07:16:33 PM »

might have a rear pretty soon, the front i am still in need of.

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Related Topics