Trail flex kit or just new springs

Started by 85yodaon33s, August 30, 2007, 10:47:21 PM

0 Members and 1 Guest are viewing this topic.

85yodaon33s

My 81 has 6 inch shackles and i think pro comp springs that have broken i have rancho 9000 on the truck 35 inch wrangler mtr's and a 3 inch body lift that will come off when i put new springs in the truck i do need high steer but i would like your guys opinion o what i should do

jimbo74

get new springs, you only need 4" of lift for 35s, with some trimming
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

85yodaon33s

trying not to trim the body because it is so straight

jimbo74

im not talking trimming the bosy, you dont need to actually cut it up, you jsut hammer down the pinch weld that you cant see with fenders on anyway
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

Tallchevy

The first gen wheel wells are larger. You can run a 4" with 35's. Or move the axle forward 2" with rears up front. You will need high steer if you do that  :twocents:
:angry: My child is an honor student at Anton Levay's School of Satanic Arts :angry:

87 4Runner redo
http://board.marlincrawler.com/index.php?topic=41959.0
87 Toyota 4Runner, SAS Rig Gallery
http://board.marlincrawler.com/index.php?topic=29877.msg3

79coyotefrg

first gen and 35's??   only need 4 inch springs,
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way