MCR check list!! The clock it ticking

[Tallchevy]

Here's my list

1. Mount fire ext
2. Have to tow hooks in front
3.    Diff covers Fabing, will be done next week
4. Change passenger side motor mount
5. Steering stabilizer
6. Get camping gear ready
7. Get some tools packed & ready
8. Install inclimeter (not really important right now)
9. Square tube rear d-shaft

The week of the 14th
1. Change engine oil
2. Check trans, t-case & diff oil levels
3. Check steering & grease
4. Check & torque suspension

I'll be ready 

[Tallchevy]

Here's my list

1. Mount fire ext
2. Have to  tow hooks in front
3.    Diff covers Fabing, will be done next week
4. Change passenger side motor mount
5. Steering stabilizer
6. Get camping gear ready
7. Get some tools packed & ready
8. Install inclimeter (not really important right now)
9. Square tube rear d-shaft

The week of the 14th
1. Change engine oil
2. Check trans, t-case & diff oil levels
3. Check steering & grease
4. Check & torque suspension

I'll be ready

[UKMyers]

Get my Hydro installed and frame plated around the steering box.

[Blingn]

1: finish rear of cage
2: hook up the lights(half done)
3: hook up the cd player to speakers(done)
4: bolt check
5: fluid check
6: mount new toggle for lights
7: mount rear bumper(not going to do)
8: fix steering wheel(done)
9: seat belt harness for passangers side
10: make the doors (half done)
MORE PAINT!!!

[rockhound]

Right now,
ship longs to Bobby for upgraded hardened inner race
once he sends 'em back, re-assemble front axle
gusset sliders and weld back up
repair pass side door
pack

[Wermz84]

• Secure Rental Truck Told me to call back One week prior.
  
• Secure Rental Trailer same as above
  
• Install Marlin Transmission   half way done
  
• Install Marlin T-case and Twin Stick
  
• Install aussie locker not gonna happen
  
• Rebuild front brakes, have parts
  
• Change engine oil and all fluids
  
• Put together camping gear
  

there it is for now.   its bound to change again soon.

[Willy Mammoth]

Do 1KZTE engine swap
Make R151F 4 spd
Change from 21 spline gears to 23 spline gears
Change from 5.29's to 4.88's in all three 3rds
Rebuild 4 spd R151F
Change FFC's 4.10's to 5.71's and weld carrier
Timing belt and Tstat
reinstall XO cage
Repair side mirror
connect oil pressure gauge
Install tach ( won't work with the ECM  )
make heat shield for muffler
Mount air filter housing and make snorkel (well we will have to see how that goes, can't wheel in the spring anyway)
Change oil
Install horn Still can't find solenoid coil 
check and fix rock lights
Check out trailer

[TacoStewie]

new head gasket
replace CV boot
put on the 38's

[DTB]

do u have a poo box yet? i am selling my new design if u need one just hit me up 

[TacoStewie]

i am just going to do the doodoo in the back of mikes truck

[Hyena]

What i have to do:

1. Sell truck
2. never going wheelin again.

I am am not doing so good.

[Sluice Box Hero]

i think im pretty ready for now, but im planning on going to the cantina as well, so things could change after that trip.

as of now:

Toyota:

Install remaining 2 bolts on front DL flange
Build some kind of skid for the Duals
Replace bulb in right headlight
Replace all wal-mart rock lights with tractor lights
Install trailer brakes on new tow rig

Callen

[Tallchevy]

Here's my list

1. Mount fire ext
2. Have to  tow hooks in front
3.   Diff covers Fabing, will be done next week
4. Change passenger side motor mount
5. Steering stabilizer (moved & can't find my mounts) 
6. Get camping gear ready
7. Get some tools packed & ready
8. Try to get a custom front bumper mad with a winch mount
9. Finish building spare tire carrier

The week of the 14th
1. Change engine oil
2. Check trans, t-case & diff oil levels
3. Check steering & grease
4. Check & torque suspension

I'll be ready

[superyota]

hey guys, i'm not sure what to be expecting. never been there.  any advice on extra parts to bring?  i'm taking all my tools, but i don't know what parts to bring?

[Wermz84]

From what I understand Axle parts are always a good call!   

[lilbuddy]

Hmmmm

Pack
Add Gas
Add some gear oil
Turn pass side lift block around
Check allignment on front end just in case
Probably should do the front main seal
Get a new wheel cylinder

Nothing really

[Willy Mammoth]

hey guys, i'm not sure what to be expecting. never been there.  any advice on extra parts to bring?  i'm taking all my tools, but i don't know what parts to bring?

Studs, cone washers,nuts for hubs and steering arms.
Extra tie rod ends, birfs,grease and oil.
Brake clean,  rags, 15 min JB Weld Grey Permatex, spare belts and hoses.
Leaf spring center bolts.
Duct tape, ecectrial tape and friction tape.
Tie wire, tire plugs and super glue.

What did I leave out?

[Tallchevy]

What did I leave out?

The rest of the truck 

[Wermz84]

 

[Ramrod]

gas and go!! thats the beauty of driving 500+miles a week in my wheeler already packed with all my tools and spare parts

[Wermz84]

gas and go!! thats the beauty of driving 500+miles a week in my wheeler already packed with all my tools and spare parts

One day I too will have this luxury!

[Duffil]

One day I too will have this luxury!

I wouldn't call it a luxury; I'd say it's overrated.

[Wermz84]

I wouldn't call it a luxury; I'd say it's overrated.

asside from the 500 miles a week,  to be able to have a spare rig, tools, parts, and parking all just sitting there waiting to go would be awsome.  I hate packing and unpacking.      maybee thats just me.

[sloyota]

get a drivers license:rivers:my truck is so ready to go out and play.i just dont trust anybody to drive it on the street even if im sitting passenger.

I hate getting in trouble..im so over it.

[Ramrod]

I dont have a spare rig but I leave all my tools and spare parts in the box just because

[Tallchevy]

Add a water pump & radiator leaking 

[Duffil]

I had to back my timing off to smog this thing.  Now it runs like poo.  I have to readjust the carb.

[snowshoebrue]

got the trans, t case dropped, put in a new rear main seal, and got my twin stick installed today.  i'll get it all put back in tomorrow with the new trans.  plan on getting the t-case brake on tomorrow also.  next i have to install my 30 splines

[MiniSimp]

  My new to do list:

Install CB
Organize tools and spare parts
Pack Camping Gear
Buy food/snacks/beer

[*** YELLER ***]

My list 

weld 2 tabs for my skid plate
install winch mount and weld
finish packing Jeep
buy food and BEER
drive to the Con