Author Topic: 90 4Runner SAS New Pics (Read 24013 times)

awhotrods · « **Reply #60 on:** Oct 10, 2007, 11:04:52 AM »

I'm running Marlin 5" all the way around as well. I setup the rear shackle mounts like that so I wouldn't need more spring or shackle to level the rear. I'm also running 4.5" shackles in the front and 6" in the back. As far as the hangers for the leaf, I would go back about an inch from the measurement CJ gave me, at 28" back, it placed the tire forward in the wheel well.

awhotrods · « **Reply #61 on:** Oct 10, 2007, 11:06:29 AM »

I need to run out and measure my WB, forgot to do that!

Quote from: lucky7 on Oct 09, 2007, 10:11:16 PM

AWHOTRODS HAS A REAL GOOD STANCE BORROW THE MEASUREMENTS FOR THE REAR BUT ASK HIS WHEEL BASE
MINES AT 105 SAFOR REAR SHOCKS I WENT EASY BOUGHT FACTOY TOYOTA REAR SHOCK MOUNTS AT THE DEALER
KINDA PRICEY BUT REAL SIMPLE .MOUNTED ALMOST FACTORY ANGLE CHECK OUT ANY TOYOTA TRUCK IN PARKING
LOT BOTH MOUNTED ON BACKSIDE

atoyot · « **Reply #62 on:** Oct 10, 2007, 12:38:36 PM »

thanx for the info

CADD MAN · « **Reply #63 on:** Oct 10, 2007, 12:41:23 PM »

that is a sweet lookin runner!!!

Shoopdog29 · « **Reply #64 on:** Oct 10, 2007, 12:54:17 PM »

Nice 4runner

86bobbedtoy · « **Reply #65 on:** Oct 10, 2007, 01:20:00 PM »

I like the 2nd gen runners and like 3rd gen body styles, Great build and keep up the good work and keep the pics coming.

lucky7 · « **Reply #66 on:** Oct 10, 2007, 04:43:11 PM »

DON'T HAVE THE TRUCK AT THE HOUSE BUT I WANT TO SAY I MOUNTED FRONT MOUNT 1" OFF OF REAR BODY MOUNT TO FACE OF NEW MOUNT .IN THE REAR THERE IS A HOLE IN THE BOTTOM OF THE FRAME AND I WENT JUST TO IT.THINK
I SHOULD HAVE HELD OFF AN INCH WITH A LITTLE LONGER SKACKLE LITTLE MORE SHACKLE ANGLE BUT A LITTLE MORE DROOP

atoyot · « **Reply #67 on:** Oct 10, 2007, 08:26:58 PM »

Quote from: lucky7 on Oct 10, 2007, 04:43:11 PM

DON'T HAVE THE TRUCK AT THE HOUSE BUT I WANT TO SAY I MOUNTED FRONT MOUNT 1" OFF OF REAR BODY MOUNT TO FACE OF NEW MOUNT .IN THE REAR THERE IS A HOLE IN THE BOTTOM OF THE FRAME AND I WENT JUST TO IT.THINK
I SHOULD HAVE HELD OFF AN INCH WITH A LITTLE LONGER SKACKLE LITTLE MORE SHACKLE ANGLE BUT A LITTLE MORE DROOP

can you post some pics or do you have a thread on your build?

lucky7 · « **Reply #68 on:** Oct 10, 2007, 08:43:14 PM »

GOING TO TRY TO START A THREAD BUT NEED TO PUT PICS TOGETHER SORRY JUST TRY TO HELP A LITTLE :

awhotrods · « **Reply #69 on:** Oct 14, 2007, 10:30:55 AM »

Here are some pics of the back bumper I want

46&2 · « **Reply #70 on:** Oct 14, 2007, 10:39:37 AM »

That is a sweet bumper. Who makes those? I have never seen one like that before.

DTB · « **Reply #71 on:** Oct 14, 2007, 01:55:26 PM »

Quote from: fortysixandtwo on Oct 14, 2007, 10:39:37 AM

That is a sweet bumper. Who makes those? I have never seen one like that before.

the sticker on it says armorology

awhotrods · « **Reply #72 on:** Oct 14, 2007, 05:18:07 PM »

Me neither! Thats why I like it, & it looks strong as hell! I want a similar plate style bumper for the front.

Quote from: fortysixandtwo on Oct 14, 2007, 10:39:37 AM

That is a sweet bumper. Who makes those? I have never seen one like that before.

70 Cam Guy · « **Reply #73 on:** Oct 14, 2007, 10:02:54 PM »

Quote from: DirToyBoy on Oct 14, 2007, 01:55:26 PM

the sticker on it says armorology

i just googled that... looks like a really cool shop
http://www.armorology.com/

94runner · « **Reply #74 on:** Oct 15, 2007, 11:02:41 AM »

look good, but a little tall for my taste. whats your ground to frame height?

John Doe · « **Reply #75 on:** Oct 15, 2007, 11:17:31 AM »

Quote from: awhotrods on Oct 14, 2007, 05:18:07 PM

I want a similar plate style bumper for the front.

Your from Nor-Cal, right? You might want to look up http://www.bentup.com/
AJ there does great work, including alot of plate bumpers. His shop is in Sacramento near Sunrise and 50

46&2 · « **Reply #76 on:** Oct 15, 2007, 11:23:11 AM »

Yeah, Luke at 4x4 Labs in Grass Valley (http://www.4x4labs.com/) does bumpers that are similar but at the same time quite a bit different. He does them in various styles including a swing away tire carrier, gas can holders, ect. He does excellent fab work though.

94runner · « **Reply #77 on:** Oct 15, 2007, 07:34:18 PM »

Quote from: John Doe on Oct 15, 2007, 11:17:31 AM

Your from Nor-Cal, right? You might want to look up http://www.bentup.com/
AJ there does great work, including alot of plate bumpers. His shop is in Sacramento near Sunrise and 50

x2. if you want a bumper like that take it to AJ @ bentup in sac. i showed him one like that and he said he could do one no problem. he can build whatever you want.

awhotrods · « **Reply #78 on:** Oct 16, 2007, 12:12:45 AM »

Cool, heard of the shop, never dealt with them though. I'll have to give him a call.

Quote from: 94runner on Oct 15, 2007, 07:34:18 PM

x2. if you want a bumper like that take it to AJ @ bentup in sac. i showed him one like that and he said he could do one no problem. he can build whatever you want.

94runner · « **Reply #79 on:** Oct 16, 2007, 08:33:05 PM »

yea, let me know how it turns out. i dont think you'll be disappointed.

70 Cam Guy · « **Reply #80 on:** Oct 16, 2007, 09:19:15 PM »

I have a question for you. On the 1st page you said you ordered the 4" but here on the 3rd page you said you have the 5" springs. Did you end up changing your mind on the springs or did you try the 4" springs?

I'm looking at 37s for my 87 pickup and it seems like 4" suspension just won't be enough clearance for the 37s without major cutting. Cutting/pounding isn't a big deal but I'd rather not have to cut out too much

ontherocks · « **Reply #81 on:** Oct 16, 2007, 10:30:58 PM »

claen bumper

awhotrods · « **Reply #82 on:** Oct 16, 2007, 11:07:26 PM »

I ordered 4" & got 5". I didn't figure that out until I called Marlin, and gave them the number off the spring. They were already on, so I just stuck with them.

Quote from: 70 Cam Guy on Oct 16, 2007, 09:19:15 PM

I have a question for you. On the 1st page you said you ordered the 4" but here on the 3rd page you said you have the 5" springs. Did you end up changing your mind on the springs or did you try the 4" springs?

I'm looking at 37s for my 87 pickup and it seems like 4" suspension just won't be enough clearance for the 37s without major cutting. Cutting/pounding isn't a big deal but I'd rather not have to cut out too much

awhotrods [OP]

awhotrods [OP]

awhotrods [OP]

awhotrods [OP]

awhotrods [OP]

Related Topics