Author Topic: Anybody in the Portland, OR area with an '81 or '82 (Read 2695 times)

n2osx · « **on:** Jun 21, 2007, 03:41:34 PM »

I need to meet up with someone in my area that would be nice enough to let me look at there wiring harness or I need someone to take a picture of a voltage regulator wiring on both sides of the "round" plug. My 81 truck caught on fire this weedend and melted a $hi!! load of wires around the voltage reg. I got a new regulator and alernator. The plug on the regulator melted and I had to direct wire it. I think that I may have mis-wired it. The truck dies when I unhook the battery and the volts on my volt gauge bounces from 12 to 10 volts. Or if there is someone in the Portland, OR area that I can check out there truck 81 to 82, that would help alot. You can write me or Call me at (503) 789-3447

Thanks

AR80Toy · « **Reply #1 on:** Jun 21, 2007, 03:59:04 PM »

I'll take a pic. of mine , give me a few minutes .

n2osx · « **Reply #2 on:** Jun 21, 2007, 04:13:27 PM »

AR80Toy · « **Reply #3 on:** Jun 21, 2007, 04:27:36 PM »

Hope this helps , this is the best one I could get . This is an 81 .

EDIT by BigMike: I fixed the IMG tagging here, but it appears the image is a dead link.

n2osx · « **Reply #4 on:** Jun 21, 2007, 04:37:13 PM »

Pic did not show?

AR80Toy · « **Reply #5 on:** Jun 21, 2007, 05:22:14 PM »

Hope this is better .

[/img]

AR80Toy · « **Reply #6 on:** Jun 21, 2007, 05:23:07 PM »

n2osx · « **Reply #7 on:** Jul 02, 2007, 04:21:43 PM »

I still need to meet up with someone about the wiring, or if you have an extra harness give me a call (503) 789-3447.

n2osx · « **Reply #8 on:** Jul 09, 2007, 03:47:23 PM »

BigMike · « **Reply #9 on:** Jul 09, 2007, 03:50:31 PM »

Are you just looking for a picture of the wires at the back of the alternator?

I've still got my factory motor from my 1981 I could take some pics of for you.

n2osx · « **Reply #10 on:** Jul 10, 2007, 02:49:37 PM »

I need to see what wires go where from alternator and voltage regulator. I had to hard wire the voltage regulator because the plug was completely melted. I rewired everything and the truck is still not charging. The alternator and voltage regualtor are both new. Something in my wiring is still not correct. I got a full harness from a 83 with a oblong plug (Mine is round) Can I still use this harness or part of it?

n2osx · « **Reply #11 on:** Jul 15, 2007, 07:31:35 PM »

n2osx · « **Reply #12 on:** Jul 21, 2007, 12:11:50 AM »

Wow no one?

yotaboy79 · « **Reply #13 on:** Jul 21, 2007, 10:05:22 PM »

i dont have one here to look at or take a picture of for you but ill try to dig up a wireing diagram for you if that would help

n2osx · « **Reply #14 on:** Jul 22, 2007, 01:00:52 PM »

cool I appreciate that, but I just bought a full harness locally for $20. I just need to get it in now.

Author Topic: Anybody in the Portland, OR area with an '81 or '82 (Read 2695 times)

n2osx

Anybody in the Portland, OR area with an '81 or '82

AR80Toy

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

AR80Toy

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

AR80Toy

Re: Anybody in the Portland, OR area with an '81 or '82

AR80Toy

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

BigMike

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

yotaboy79

Re: Anybody in the Portland, OR area with an '81 or '82

n2osx [OP]

Re: Anybody in the Portland, OR area with an '81 or '82

Related Topics