The official rig height thread

Started by MiniSimp, March 27, 2007, 09:21:34 PM

0 Members and 1 Guest are viewing this topic.

jrock

I'll be adding a leaf to my front pack, that will put me right at that your height :) . You compensated for tire size?

MiniSimp

Quote from: jrock on March 19, 2010, 09:47:10 AM
I'll be adding a leaf to my front pack, that will put me right at that your height :) . You compensated for tire size?
I didn't count tires, just the distance between the bottom of the diff and the front hanger.

jrock

Shoot. Then your way lower than me. I'm still on 33s.

MiniSimp

Probably then, I'm on 36.8's at 0psi :D

jrock

What is the height of the center of your headlight? Mine is 39.5in.

MiniSimp

No idea, I can look tonight, if I remember

jrock

I'll have to get measurements of it weighed down. The offroading height :)

BigMike

Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

jss

Here's my numbers  -   :thumbs:

Make  -  Yota
Year -  85
Model - 4Runner
Height to Front Spring Hanger  -  25.5"
Height to very rear of frame  -  34"
Height to Bottom of Frame Door  -  25"
Height of Transfer Case Skid Plate  -  22.5"
Height to Bottom of Front Diff  -  11"
Height of Tires at 30psi  -  35"
Wheelbase  -  105"
Hold my beer and watch this....

Yoat Goat

Make - Toyota
Year - 1980
Model - Truck
Height to front spring hanger - 27 3/4" stock crossmember
Height to very rear of frame - 30 3/4" (might be off due to driveway  :talkingn:)
Height to bottom of frame under door -22 1/4"
Height of transfer case skid plate (or just case if no skid) - 18 1/4" to drain plug
Height of tires at "X"PSI - 33 1/4" at 15 psi
Height to bottom of front diff - 10 3/4"
Wheelbase - 114"
T urning
O ver after
Y ears
O f
T rail
A buse

weakyota91

Make - toyota extended cab
Year - 1991
Model - p/u
Height to front spring hanger - 27.5
Height to very rear of frame - 34.5
Height to bottom of frame under door - 27
Height of transfer case skid plate (or just case if no skid) - 21.5
Height of tires at "X"PSI - 33.2
Height to bottom of front diff -10.5
Wheelbase - 121.9

Yoat Goat

Maybe some peple get the frame measurement wrong, is it the bottom of the frame or bottom of the door? Im getting conflicting measurements with different peoples measurements. Maybe frame height is different on diff years...
T urning
O ver after
Y ears
O f
T rail
A buse

MiniSimp

Quote from: Yoat Goat on May 03, 2010, 10:13:41 PM
Maybe some peple get the frame measurement wrong, is it the bottom of the frame or bottom of the door? Im getting conflicting measurements with different peoples measurements. Maybe frame height is different on diff years...
For this measurement it is the bottom of the frame, definetly not the door.

Yoat Goat

T urning
O ver after
Y ears
O f
T rail
A buse

WHITE_TRASH

80 long box
128.5" wheelbase
25" to the frame, flat belly nothing hanging down.
44's
73ish inches to the top of the roof.


That's the best I can do sitting in CA at a truck stop. :gap:
Full hydro, 186:1 with an auto and 44's what could go wrong??

exxon

anybody have stock measurements on a 86 'runner? I looked and haven't seen anything.
'86 4runner 22re
'04 TJ
'78 Ramcharger 440 35's

MiniSimp

Quote from: jrock on March 19, 2010, 10:17:38 AM
What is the height of the center of your headlight? Mine is 39.5in.
Finally got to this. :gap:

With the 37's aired up to 25psi (street pressure) the center of the headlight is 39" even.

TacoRunner

#137
35psi
37" tires
42.5" headlights
5"s of lift
26" at frame under door.
www.4WHEELUNDERGROUND.com
[email protected]
AKA The GODFATHER The 3RZ Original

Performance Tuned shocks for Leaf Sprung Vehicles   http://www.4wheelunderground.com/Tuning.html

Yota Rolla

#138
Year -82 pickup
Height to front spring hanger -29 1/8
Height to very rear of frame -35 7/8
Height to bottom of frame under door -27 1/4
Height of transfer case skid plate (or just case if no skid) -27 3/4  :yesnod:
Height of tires at "X"PSI -35 1/4
Height to bottom of front diff -12 5/8
Wheelbase - 108''
82 locked,geared,cased,caged daily

muddywaters

Year-81 pickup
Height to front spring hanger-24 1/4
Height to very rear of frame-30
Height to bottom of frame under door-22 3/4
Height of transfer case skid-forgot to measure will update
Height of tires at "X" psi-34.5
Height to bottom of front diff-almost 12
Wheelbase-107.5
Im like Hugh Hefner minus everything good about his life.

*** YELLER ***

bringing this back from the grave :gap:


um stock runner height ???


I'll post mine tomorrow :thumbs:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

*** YELLER ***

Make - Toyota
Year - 1987
Model - 4 Runner
Height to front spring hanger - 25 1/2"
Height to very rear of frame -  ???
Height to bottom of frame under door -  24 1/4"
Height of transfer case skid plate (or just case if no skid) - 19"
Height of tires at "X"PSI -  35 lbs
Height to bottom of front diff - 12"
Wheelbase - 109"

MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Dr.Maxwe001

IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

Dingman.

Cannot post here,  truck is on jack stands.  lol

*** YELLER ***

MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

rockin86runner

Make - Toyota
Year - 1986
Model - 4 Runner
Height to front spring hanger - 25"
Height to very rear of frame -  or to rear shackle 27"
Height to bottom of frame under door - 26 1/4
Height of transfer case skid plate (to tcase drain plug ) - 23"
Height of tires at "X"PSI -  36.5
Height to bottom of front diff - 12.5"
Wheelbase - 110"
85 toy runner tons 4link front and rear ORIs 42 pitbulls

86 runner some other things  pained orange STOLEN REWARD IF FOUND

70 cj-5 renegade1 buick 231 v-6 t-18 dana20 dana 30,44 32in BFG at 

:usa: USN SEABEE EO2 SCW .....We Build.We Fight.We Defend....Hoo-Rah  GOD BLESS OUR TROOPS :usa:

patches

this is a sweet idea. too bad im not at home to give measurements! but that would be a good idea to do before i lower mine.
I don't trust anything that bleeds for 5 days and doesn't die....

TURBO

i have a bone stock 82 longbed...(except the 31" bfg at's) will post up when the trans/t-case is back in
MY BUILDS: http://board.marlincrawler.com/index.php?topic=76463.0 :woohoo:

More than tread lightly, leave it like you were never there, nor anyone else.
I AM :screwy:!!!

Quote from: Hank Williams Jr. on September 19, 2008, 09:55:09 AM
"These dusty roads ain't streets of gold
But I'm a happy right where I'm at"

Quote from: Wermz84 on September 19, 2008, 09:55:09 AM
Marlin is like the Chuck Norris of the rock crawling world. 

rattlers

#148
hello , I have a stock white 85 4runner sr5,22re,  5speed w56a ,brown interior,  235/75/15 tires . I only was able to measure 3 locations

1. 17 inches from bottom of frame under front door to floor
2.  8 inches from bottom of the lowest part of rear  axle , not sure if the front would be the same measurement or not
3.  25 inches from bottom of tailgate to floor  

__________________________
ll_______ll_______ll__TOYOTA_ll    
ll_______ll_______ll____85____l

HI34

Make - Toyota
Year - 1988
Model - Single Cab Pickup
Height to front spring hanger - 29"
Height to very rear of frame - 33 3/4"
Height to bottom of frame under door - 26 1/4"
Height of transfer case skid plate (or just case if no skid) - skid 19 5/8"
Height of tires at "X"PSI - 34" @23psi
Height to bottom of front diff -11"
Wheelbase - 102"



Aloha