The OFFicial Slacker Buildup.....

[Jared]

to start off with heres a little information about my self....im just a 19 year old kid and i just started livin on my own.... i do construction for the city/county of sacramento and kinda didnt have a place to wrench on my junk so i looked and looked and found a small 1200 sq.ft shop for a pretty smokin deal....

Got tired of workin in a little 1 car garage that a  dana 60 couldnt even squeeze in... so here is my buildup..

its a 1984 toyota ex cab.

iheres the deal...
yota started life bone stock with some oakiefied camo paintjob....i think the windshield even got some pisscan lovin....
its got a tired ol 22re in it that im gonna swap out

Front axle
gm dana 60
plans:
Full hydro
5.38s
Arb
welderbilt knuckles
3/4ton brake adapters

REar axle
ford rear 60
Great lakes offroad discbrake adapters
Ruffstuff specialties 60 swap kit....
plans: 35 spline with 538s spooled

Tranny.... rebuilt w56
Tcases??? hopefully a dual ultimate kit.... maybe marlin maybe trail gear? dont know yet

future plans for a full exo

Kinda building the rig right now on a tight budget due to winter slow down in construction but sooner or later i will get around to finally wheelin her when work picks up...

built the front drop hanger out of 1/4"plate and some 2x4






I liked how the formula toyotas were doing their rear shackle hangers so i decided i would jump on the bandwagon.....

[KYOTA]

haha awright!! good to see one of the OG's back!! this is gonna get good 

[Jared]

this is the insight for the buildup.... im tired of changing out birfields... i hate workin on toy axles so i figured if im gonna build a rig that is strictly trailer queened i figured i would do it right...no 1/2 ton 44 front here...its all about the 8 lug 60s....



Here is the front 60 ... hopefully i can get this thing up and running for memorial day weekend.... i think im gonna be goin up to reno and hittin up some of the canyon trails with a few fellow wheelers from the area....

front 60 was caked in mud and grease...hopefully with tax returns it should be enough to take care of the arb and all of the gearing hopefully.... Im gonna take the front in to Sean at river city diff to setup the arb and the 5.38s...im gonna do the rear myself with one of my shop neighbors.... plus the rear is jsut gettin a spool and im gonna call it good..

Rears got Greatlakes offroad disc brake adaptors...  I ordered a Rear axle 60 swap kit from ruff stuffspecialties...it came with perches, ubolt plates and ubolts...its saved me a lot of time just runnin 20 minutes from my house then allover the place to get steel and drill bits and all of the unwated bs that usually comes with makin simple stuff....

[Jared]

got the front all trimmed downed thaks to my    so i got the hanger in place were i wanted it...front axle is pushed forward like 4 inches...

Im gonna do alittle extra bracing to get it were i want it....

[Loki]

that thing is going to be huge...why not cut out the front stock cross member and move your front spring hanger up 2" ?

[alwayzbroken]

Awesome! I am glad to see another 1 ton buildup. I will be doing the same in the future  What are you gonna run for springs and tires?

[6.72:1]

I like where this is going....

[Hyena]

that thing is going to be huge...why not cut out the front stock cross member and move your front spring hanger up 2" ?

Cause he wants to run big tires!  looks good jared.  some good fab work so far dude. 

[6.72:1]

I like big tires.

[Jared]

im gonna be runnin 42s and chevy leafs in the rear and toy rears up front... i want to link the rear on some coils but right now im just worried about gettin it rollin

[Jud]

im likin it so far. cant go wrong with big ass tires and big ass axles! haha

[iNfErNaL]

Nice 

[Yota4life]

Hey Jared, That front hanger looks pretty sick. Good fab work. One day i will come by your shop and check it out.

[Jared]

more than welcome to anytime....just give me a call....916-390-4487   its right behind citylimits showgirls on auburn...litterally...

welll just got back from adam ant fab down in elk grove...picked up some ubolts and my kingpin knuckle rebuild kits.....   great guy to buy stuff from....he went out of his way tp get me some parts....love the service.. any ways im gonna try to get this thing rollin soon...

[rockcrawlinredneck]

Are you in the same shop as NOODLES? I know he is over in that same area. Who do you work for with the city/county? I work for the city in the utility's department, working on the water system. I like the way your build is going also. Cant wait to see some more progress pic's.

Kevin

[Jared]

i actually work for the contract company johnson mechanical...we rebuild pump stations and septic stations....we did the sump 129 off of san jaun in truxel area.... My shop is 400 feet from noodles shop...im in the far back complex....   im always back and forth to noodles shop...me helpin him or hes helpin me out.... way cool guy...

[alwayzbroken]

i actually work for the contract company johnson mechanical...we rebuild pump stations and septic stations....we did the sump 129 off of san jaun in truxel area.... My shop is 400 feet from noodles shop...im in the far back complex....   im always back and forth to noodles shop...me helpin him or hes helpin me out.... way cool guy...

Wow I don't want your job! Talk about the most disgusting jobsite ever. I worked wastewater for a summer, the job wasn't bad except for the lift stations.

[toybuilt]

  Yay for the 1 Ton builds    Right on this looks like its goin to be a killer

[Jared]

Wow I don't want your job! Talk about the most disgusting jobsite ever. I worked wastewater for a summer, the job wasn't bad except for the lift stations.

Well its the only job that can fund 1 tons and pay for my shop and rent.....