Topic: Ignition HELP!!!!!

[alinfante]

i replaced my coil and sparkplug wires the other day ran fine for like two days and now my truck stalls on the freeway.....never used to do that.

i have put everything back, and it still stalls. it will run fine around town, but as soon as i get on the freeway for about 20 minutes....stall ..........

the funny thing is...when i just touch the distributor to coil wire...it runs fine until something happens.....then i touch it again and it runs....

 
i need help....
thanks,
aaron

[WHITE_TRASH]

Need info like year, engine, etc.  We can only help those that help themselves.
WT

[alinfante [OP]]

its a 22re.....87 4runner.....sorry for the lack of info....

[alinfante [OP]]

ttt

[WHITE_TRASH]

Im thinking that your coil wire could have a break internaly.  If it will run fine then stop all the sudden you pop the hood wiggle the wire I'd deffinately say bad wire.  Try the old one to check.
WT

[84runner]

Ya sounds like a bad wire. what kind are they?

[alinfante [OP]]

i reaplced them with taylor wires.....but i switched back and just finished repacing the cap and rotor......

still the same problem.....

late,
aaron

[alinfante [OP]]

FIXED IT!!!!

it turns out it was missing a ground.....it seems the ignitor grounds to the coil thorugh the bolt......my new coil only came with one bolt hole, wrong one,.......
   

oh well.....live and learn...

late,
aaron

[WHITE_TRASH]

Hah that makes sense.  The coil was not making a reliable connection.  Glad to here ya fixed it!
WT

[84runner]

Glad it was a cheap fix.