my '85 Toyota 4Runner SR5

Started by SAMI, August 01, 2006, 02:32:53 PM

0 Members and 1 Guest are viewing this topic.

SAMI

Suspension/steering:

5" all pro lift
crossover steering
rear traction bar
pro comp long travel shocks
Ford shock mounts in front
extended ss brake lines
2" wheel spacers on front
V6 calipers and vented rotors, V6 master cylinder

Drivetrain:

Dual transfer cases (2.28x2)
Front axle: Chromoly shafts, longfields (no-ring design), all new seals rebuilt knuckles
Front diff: 5.29 Richmonds and full detroit locker
Rear axle: Wider '86 axle rebuilt with new seals and bearings
Rear Diff: 5.29 Precisions with Toyota e-locker
Front long-slip driveline
Stock engine and transmission, runs and drives great.

Armor:

Home built rear bumper w/quick connect mudflaps
sliders
Home built front bumper
Bud Built crossmember

Body/Interior

Body work and paint done by Matt Ballard. Honda Electron Blue.
Interior is original SR5 with every option but power locks. It has power windows, sunroof, tilt meter, a decent sony stereo, cb, good carpet, fiberglass top in excellent condition (taken from a garaged '86)

Other stuff:

37x12.50 Swamper SSRs on chrome modular wheels for wheelin trips. also 315/75/16 MTR's on some aluminum 16" wheel with imitation beadlocks.(i got a great deal on them)

On board air - toyota a/c compressor with oiler, dryer, pressure switch, .75 gal tank and all regulators/guages/fittings. Idle up and hand throttle to adjust air output.

20" air horn with pull chain valve.

Driving lights and underbody rock lights

Tube doors (Marlin's)

I'll get more pics once i'm home and resize afew....

-Jason


85yoda

Nice!

CTENG in KS

IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

milla85

Is the fiberglass top ever going to be painted blue to? It looks so clean when they are the same color. Nice looking rig man! :)

olivedrab85

Nice clean runner any more pics?
"Gotta keep it G rated for Marlin"   my runner http://board.marlincrawler.com/index.php?topic=26527.0

Yota4life

Thats a nice runner. Show us some wheelin pics
88 Toyota Pickup with some stuff...
Build up: http://board.marlincrawler.com/index.php?topic=11133.160

SAMI

#6
Here's some pics for ya's... thanks for your kind words on the rig... i like it :greengrin:

Pics in order from top to bottom.... my runner next to team Mickey Thompson's buggy(i was on team MT for a day... woohoo), next is wheeling in American Fork Canyon just south of SLC Ut., next two are more AF Canyon brought to you by my camera phone...

-Jason

SAMI

#7
Afew more... Moab... and just hit 120K original miles the other week!!... and building fences for the Forest Service in my favorite canyon....

-Jason


SAMI

Quote from: rocktoy83 on August 06, 2006, 04:46:51 PM
You have on good looking runner :bowdown:

thanks man... i forgot to mention... it's wheelbase is at 114"s...

-Jason

SAMI

#10
Wheeled this last weekend in Richfield Utah... i highly recommend this area!!

my total damage thus far is as follows... one air hose from the york to the tank... one rock light(the one that melted a hole in the air hose to bedin with)... chipped paint after the tire bent some fenderage... rear driveline thrashed.... one door pin to my Marlin doors... top bolt to my starter motor falling out.... and i think my fuel filter has a huge hole in it... also, if it weren't for the rock sliders and BudBuilt crossmember/skid plate... i would've killed my truck!!!

-Jason

jedimasteryoda

sweet pics is the color of your runner burple?  them look like some kik a$$ trails too,
its a truck its built for this kind of stuff.
  under my tires is a honda

tom w.

where at around richfield utah? i've got family there, and i'm plannin on goin up there as soon as i get my truck goin. don't really know where any cool places to go are though.

bcjoseph23