Author Topic: Axle housing stud measurements (Read 1604 times)

Wraith · « **on:** Apr 14, 2006, 05:35:01 PM »

I searched but didn't find what I need. I need to know the length and size (10mm or 12mm) of the studs that hold the front third in place, I already know it's a 1.25" pitch. Thanks for any help. Dennis

Duffil · « **Reply #1 on:** Apr 14, 2006, 08:24:35 PM »

i thought they were 8s, but i've never looked closely at em...I'd say no way are they 12s, though.

MiniSimp · « **Reply #2 on:** Apr 14, 2006, 08:59:31 PM »

8's and there are 2 different length studs, 8 one length, 2 longer.

79coyotefrg · « **Reply #3 on:** Apr 15, 2006, 08:01:37 AM »

im gonna guess the length at 25 and 30mm and yes 8mm diam

Wraith · « **Reply #4 on:** Apr 15, 2006, 05:18:10 PM »

The guy at toyota told me they were either 10 or 12's but I think you are right in that they are 8's. Thanks alot!

Willy Mammoth · « **Reply #5 on:** Apr 15, 2006, 05:29:05 PM »

I just measured the length and came up with the short ones being 35mm and the long ones being 40mm.
They all are 8mm x 1.25

Author Topic: Axle housing stud measurements (Read 1604 times)

Wraith

Axle housing stud measurements

Duffil

Re: Axle housing stud measurements

MiniSimp

Re: Axle housing stud measurements

79coyotefrg

Re: Axle housing stud measurements

Wraith [OP]

Re: Axle housing stud measurements

Willy Mammoth

Re: Axle housing stud measurements

Related Topics


	Author Topic: Axle housing stud measurements (Read 1604 times) 0 Members and 1 Guest are viewing this topic. Wraith Rock Master Turtle Points: -37 Posts: 176 Member since Aug '04 Crawling with Marlin Axle housing stud measurements « on: Apr 14, 2006, 05:35:01 PM » I searched but didn't find what I need. I need to know the length and size (10mm or 12mm) of the studs that hold the front third in place, I already know it's a 1.25" pitch. Thanks for any help. Dennis Logged "Why yes I am an extremist, thank you for noticing" Ted Nugent "There is nothing more frightening than ignorance in action" Einstein Duffil lurker Gold Turtle Award Turtle Points: 138 Posts: 4,844 Member since Nov '04 Re: Axle housing stud measurements « Reply #1 on: Apr 14, 2006, 08:24:35 PM » i thought they were 8s, but i've never looked closely at em...I'd say no way are they 12s, though. Logged MiniSimp Outdoor Enthusiast Gold Turtle Award Turtle Points: 0 Posts: 5,120 Member since Jan '05 SimpsonBrothers.net Re: Axle housing stud measurements « Reply #2 on: Apr 14, 2006, 08:59:31 PM » 8's and there are 2 different length studs, 8 one length, 2 longer. Logged Simpson Brothers Photography MCR10 Photos! 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Axle housing stud measurements « Reply #3 on: Apr 15, 2006, 08:01:37 AM » im gonna guess the length at 25 and 30mm and yes 8mm diam Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way Wraith [OP] Rock Master Turtle Points: -37 Posts: 176 Member since Aug '04 Crawling with Marlin Re: Axle housing stud measurements « Reply #4 on: Apr 15, 2006, 05:18:10 PM » The guy at toyota told me they were either 10 or 12's but I think you are right in that they are 8's. Thanks alot! Logged "Why yes I am an extremist, thank you for noticing" Ted Nugent "There is nothing more frightening than ignorance in action" Einstein Willy Mammoth Rock Ninja Gold Turtle Award Turtle Points: 0 Posts: 4,252 Member since Nov '04 Re: Axle housing stud measurements « Reply #5 on: Apr 15, 2006, 05:29:05 PM » I just measured the length and came up with the short ones being 35mm and the long ones being 40mm. They all are 8mm x 1.25 Logged American by birth, redneck by choice. Making Of http://board.marlincrawler.com/index.php?topic=6472.0 Sightings Of http://board.marlincrawler.com/index.php?topic=10805.0