SIck A$$ RuNNer? ExoED oN 42'S new pics of 4 link build!

[slorunner85]

I'll post some more pics tomarrow with more light and the whole truck further away.its long the wheelbase ended up at 126"so I'll be 1/2 way through the sluice before my rear tires are in.

[slorunner85]

the rear links are 56" long and the frts are 46"

[TheCookieMonster]

sick truck man ..so what up with that stand-alone harness you got? i see you dont have a distributor anymore ...seems pretty cool

[slorunner85]

yeah no distributor,coil packs now.no maf,egr valve,cold start injector,everything is gone and replaced with a map sensor,coolant temp sensor,crank sensor the kit came with all the necessary block off plates. my motor runs like a sewing machine now throttle response is killer.

[TheCookieMonster]

thats pretty sweet. have you been able to test the truck out yet?

[slorunner85]

I plan to take it up to fordyce thurs.afternoon or fri morning.just need to get the shocks fiiled.and we'll go se what difference the links made.I will deffinately take pics and post how it did. at 126" im curious to see what it can't climb.

[gotrocks]

WOW thats all I can say right now is WOW

Fabulous fab job and I love how clean everything looks.  The only thing I would do is loom the loose wires together to finish it off. 

Now we need a shot showing the whole truck with that new suspension and new front end job.  You by far have one of my favorite built 4Runners.  I can't wait to see the wheeling shots.

BTW how does the toyota master and booster do with the 1 ton axles?  I'm assuming your using a FJ80 master.

[slorunner85]

WOW thats all I can say right now is WOW

Fabulous fab job and I love how clean everything looks.  The only thing I would do is loom the loose wires together to finish it off. 

Now we need a shot showing the whole truck with that new suspension and new front end job.  You by far have one of my favorite built 4Runners.  I can't wait to see the wheeling shots.

BTW how does the toyota master and booster do with the 1 ton axles?  I'm assuming your using a FJ80 master.

thank you im still tying up a bunch of loose ends on this truck its been going slow because i broke my hand dirt bike riding.

the m.cyl is from an fj and the truck stops excellent it will throw into the windshield.even with the 1 ton ford calips on the ft and 1/2 ton chev calips on the rear.and i still have the rear lspv.all i did was take the rod off didnt even tie it up.i was kind asuprised the stock m. cyl was even ok.

[slorunner85]

I'm not happy with how tall it is so im going to redo the rear shock hoops i think and lower it.its very stable on the road though!!


still need to locate the the reservoirs just temp for now

[lucky7]

NIIIIIIIIIIIIIIIIICCCCCCCCCEEEEEEEEEEE!!!!!!!!!!!!!!!!!!!!!!

[gotrocks]

Crap thats one heck of a front truss.  I'd have to agree with you on the ride height though.  It is a tad bit to tall.  I'm assuming when you said that it has good road manners thats referring to fire roads.  I don't see how you'd get away with driving that on the road without getting harassed.  But if I was a cop I'd pull you over just to check it out.

How do you like the radius arm up front.  I had a Jeep TJ with that setup and it seemed to work really well.  But now that I know a little more about suspensions it seems like guys frown on that.  I'm not doggin on your just curious how its working out.

[pumkin toy]

so where did you get the kit for your 22re?  i'm curious to find out more info on that kit.  it looks really clean without all the vaccum lines and whatnot.

[slorunner85]

Crap thats one heck of a front truss.  I'd have to agree with you on the ride height though.  It is a tad bit to tall.  I'm assuming when you said that it has good road manners thats referring to fire roads.  I don't see how you'd get away with driving that on the road without getting harassed.  But if I was a cop I'd pull you over just to check it out.

How do you like the radius arm up front.  I had a Jeep TJ with that setup and it seemed to work really well.  But now that I know a little more about suspensions it seems like guys frown on that.  I'm not doggin on your just curious how its working out.

im taking it to fordyce tomorrow to see how it does.i guess i;ll see about the radius arm setup.why are they so frowned upon?

[slorunner85]

so where did you get the kit for your 22re?  i'm curious to find out more info on that kit.  it looks really clean without all the vaccum lines and whatnot.

i got the kit from s.d.s simple digital systems.

[THK Matt]

i got the kit from s.d.s simple digital systems.

any more info? IM HIGHLY interested.

price, site, specs, difficulty in installion?
PM me if you want

Your Toy is OUSTANDING

[Hyena]

http://www.sdsefi.com/specific.html