my proj truck..

Started by GoaT, February 06, 2006, 05:11:40 PM

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4
User actions

blackdiamond

#30
February 20, 2006, 01:24:42 PM
Quote from: GoaT on February 20, 2006, 12:51:42 PM
whats wrong with mile marker hubs???

Nothing specific, but guaranteed to not be as strong as the stock AISIN hubs.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

GoaT

#31
February 21, 2006, 06:03:28 AM
I just figured out my truck has a manual steering box on it.. no wonder wht the p/s pump didnt have lined on it... :( stupid me... so im looking to making a crossover with a Y arm.

79coyotefrg

#32
February 21, 2006, 08:32:15 AM
you'll need to find a 86 to 95  steering box  and a spare tierod  to make the Y
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#33
February 21, 2006, 08:34:05 AM
hopefully it wont hit the bottom of the spring when its turned hard to the right
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GoaT

#34
February 21, 2006, 03:07:57 PM
Quote from: 79Coyotefrg on February 21, 2006, 08:34:05 AM
hopefully it wont hit the bottom of the spring when its turned hard to the right

u mean left?

GoaT

#35
February 21, 2006, 05:28:45 PM
k first seat is removed now... im starting the cleaning of the intirior prosses...

GoaT

#36
February 21, 2006, 05:30:49 PM
both seats are out and im going to clean it up next...

oh there are like 2 days ago...

GoaT

#37
February 21, 2006, 05:31:48 PM
both seats are out am im about ti start the degreaseing prosses..

GoaT

#38
February 21, 2006, 05:33:28 PM
this is actuall after all the degreaseing is done... and should i remove the sound damping crap on the floor??? before the rino lining???

GoaT

#39
February 21, 2006, 05:36:36 PM
late night carb rebuild... and figuring out its not the factory carb... yah it a webber carb.. and now im waiting on the new rebuild kit for the webber so maby i can start it up one day :(

Shoyrtt

#40
February 21, 2006, 05:58:41 PM
Quote from: GoaT on February 21, 2006, 05:33:28 PM
this is actuall after all the degreaseing is done... and should i remove the sound damping crap on the floor??? before the rino lining???
A friend of mine did his own "rhino lining" of the cab of his 4Runner and it turned out fair.  :suprised: In the areas where the sound dampening stuff is at, the stuff peels. :thumbdown:   On the other hand, if you get rid of it, your truck might be really loud. :eyecrazy:
JOIN THE BLUE RIBBON COALITION!

http://www.sharetrails.org/

79coyotefrg

#41
February 21, 2006, 05:58:47 PM
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

kneedownnate

#42
February 21, 2006, 10:45:00 PM
You're gonna wanna leave that stock damping material on the floor unless you really enjoy tons of frustration.  It doesn't come up easily!  Rhino liner can be shot over almost anything, so as long as it's clean you should be fine.  Before they shoot it I'd ask em if you should leave some bolts in all the holes.
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

GoaT

#43
February 21, 2006, 10:52:33 PM
Quote from: kneedownnate on February 21, 2006, 10:45:00 PM
You're gonna wanna leave that stock damping material on the floor unless you really enjoy tons of frustration.  It doesn't come up easily!  Rhino liner can be shot over almost anything, so as long as it's clean you should be fine.  Before they shoot it I'd ask em if you should leave some bolts in all the holes.

i going to roll it my self... and im sure it would be a total pregnant dog for the lining to come up with the rino all over and around it...

kneedownnate

#44
February 21, 2006, 11:43:09 PM
Ahh, I see.  Good luck with that then!
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

SWAMPER

#45
February 22, 2006, 02:37:05 PM
It really wasent too much of a pain in the butt to remove that sound dampening rubber crap when I did mine :dunno:
1985 Toyota Pick/Up longbed...bobbed 15",  lifted 5", 36's.....http://board.marlincrawler.com/index.php?topic=36992.0

eddyb

#46
February 22, 2006, 02:46:00 PM
That thing is sweet.  Love the color.
A bad day of wheelin' is better than a good day at work

GoaT

#47
February 23, 2006, 03:46:24 PM
now i want to know if i should remove theres things....

#1 1/2 of the a/c. i want to remove most of it.. pulling this messs up the heater and defroster???

GoaT

#48
February 23, 2006, 03:47:38 PM
and them most of the egr crap... and a/c.. anything i should know when i remove this stuff??

GoaT

#49
February 23, 2006, 03:48:41 PM
#2 this is all the vacum and a/c crap.. do i need any of these vacume lines?

GoaT

#50
February 23, 2006, 03:49:35 PM
as u can barly see 1 vacume line is connected to the carb connecting to the cam sensor

79coyotefrg

#51
February 23, 2006, 07:55:55 PM
chunk it
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#53
February 25, 2006, 10:05:26 AM
:slap:   you nut,  i saw the top of your cab and thought, dang hes flexing like crazy,

:headshake:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#54
February 25, 2006, 10:06:36 AM
you gotta get a old dodge billy goat  for a hood ornament  :yupyup:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GoaT

#55
February 25, 2006, 10:20:03 AM
Quote from: 79Coyotefrg on February 25, 2006, 10:06:36 AM
you gotta get a old dodge billy goat  for a hood ornament  :yupyup:

oh hell yah!!! my buddy has a bull pup on his bronco

GoaT

#56
February 26, 2006, 08:22:01 AM
so who likes the look of cut fenders!

79coyotefrg

#57
February 26, 2006, 08:35:25 AM
oh man :down: it looked so sweet with that on there,  you should have waited till it was all mangled like mine was befor ya cut it,  oh well too late now


you did a good job though
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GoaT

#58
February 26, 2006, 08:59:01 AM
Quote from: 79Coyotefrg on February 26, 2006, 08:35:25 AM
oh man :down: it looked so sweet with that on there,  you should have waited till it was all mangled like mine was befor ya cut it,  oh well too late now


you did a good job though

i liked the bumper... look at my approch hight now!!!

79coyotefrg

#59
February 26, 2006, 09:05:50 AM
yup  looks good,  kinda looks like your truck has lips
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way
Print
Go Up Pages 1 2 3 4
User actions