Topic: V6 23 spline inputshaft on t case same as turbo 23 spline Inputshaft?

[robrub00]

Well I have been looking I  the Input Shaft marlin sells is

Turbo Input

23-spline transfercase input gear. Originally for 1986-1987 Turbo Transfercase 2.28:1 input gear. Accepts 5spd transmission outputs of R150F (3.0L V6) and R151F (2.4L Turbo I4). Fits any gear driven t/case 1979-1995.
Add This Item Shopping Cart    MC-14211, 23 Spline Input Gear, $159
   IT fits in any Gear driven case But what about  fitting in a chain driven case?  Is a chain driven imput different cause it goes to a chain.  I am asking because I was hoping to find a good price on a v6 transfercase and pull out the Input to make a 21 spline a 23 spline.  But that would probably be too good to be true.  IF anyone couls comfirm this I would appriciate it.  I assume they are different.  But I don't have one to bust open to compare.  thanks all

[BigMike]

No, they are completely different. Different input length, different gear size/ratio, different bearing size, different length..

The input on the V6 chain drive t/case is the sun gear for the planetary gear drive system.

The Turbo Input is just a regular gear drive input.

The two happen to both have the same 23-spline dimensions (spline pitch and diamater), and using a V6 adapter plate of about 1/2", will work with a R150F V6 transmission.

BigMike

[robrub00 [OP]]

thanks I figured as much!