Hello from Idaho

Started by 77fixer, September 20, 2005, 08:39:48 PM

0 Members and 1 Guest are viewing this topic.

77fixer

Just picked up an 84 toyota SB.  Used to have a 1 tonned Blazer on 39.5 IROKs, but sold it to buy tools and build a buggy :gap:   Turns out no matter how cheap you are, they take a boatload of $$$$$.  Anyways, I got tired of not having a rig and picked this one up not running for $350.  I have a pair of 56" chevy springs that I am fitting to the rear while I truss the housing and weld the spiders (and maybe something extra that I've been thinking about for 15 years).  Then on to the front with the rear springs, truss work and welding.  Followed by a bob job.  Got a line on some cheap 33's for now.  Then a double Tcase and some 35-37's.  I don't even have the thing running yet :smack:
Oh ya, this is not my first toy.  I had an 80 back in 86-88, with a 4" trailmaster and QR78 Buckshot radials.  If I'd a had this internet back then...

Rocksurfer

 :welcome: Hello from California, welcome to the board.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

:welcome: to the Marlin BB  ,  the best little truck stop on the information super highway  :rofl:


guess you need a buildup thread over in the project buildup section nbow :dunno: 

gotta question just say yoooohoooo  :wave:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

gonzo

Hey 77fixer :wave:  glad to see ya here.  This board loves pictures.  So if you got'm please show'um.   :welcome:

KWP

 :welcome: to the board, and good luck on the build.
88 Toyota truck ( Under Construction ) Dana 60's front and rear 5.38's, welded diffs, 3inch Downey rears up front,one link rear with aerostar coils rolling on 39.5x16.50/17 Pittbull Rockers and 17x9 Pro Comp extreme alloys.http://board.marlincrawler.com/index.php?topic=40816.0

rebel racer

85 x-cab -16" 36"iroks, spooled f&r, 5.29's, three shifters,oba and some other crap


Life . . . should not be a journey to the grave with the intention of arriving safely in a attractive and well preserved body --- but rather to skid in sideways, cigar in one hand, beer in the other in the other,body thoroughly used up, totally worn out, and screaming, "WOW - What a ride!"

77fixer

I live in SW boise, work in Nampa.