Georgia boy

Started by Project94, September 12, 2005, 04:43:54 PM

0 Members and 1 Guest are viewing this topic.

Project94

Hello all,
            I've been lurking here forever. I'm active on Pirate and TTORA nation board and the Tennessee/Georgia boards.  My truck is a 1994 reg. cab 4x4.  It's dark green and as it sits now it's on 3 1/2 inches with 33" BFG ATs.  I've mostly used this board as research for my SAS.  I have the marlin kit with the 5" springs.  I've had it for a month, trying to find the time to get it under the truck.  Now I'm down at school and time is even harder to muster up.  But, if eveything goes as planened my truck is going under the knife Thrusday(9/15).  I'm getting a local shop (here at school) to weld up the hangers and plasma cut the holes for the shackles in the front.  I'm trying to get as much done as possible before hand, so I can hopefully get it all done this weekend. :crossed:    I'll make a build-up thread when I find the time next week, I just got a new camera so I'll be taking plenty of pics.
truck now:
1994 Toyota: SAS, 5.29s, LONGS, Lockrights fr/rr, 5" of lift, 35" MTRs, 20lb CO2, Homemade Front/Rear Bumpers, Lots of dents and scrapes, but Marlin himself signed my truck.

Rocksurfer

Hey,  :welcome: to the board, that's one nice red truck you have there. :laugh:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Project94

1994 Toyota: SAS, 5.29s, LONGS, Lockrights fr/rr, 5" of lift, 35" MTRs, 20lb CO2, Homemade Front/Rear Bumpers, Lots of dents and scrapes, but Marlin himself signed my truck.

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Project94

1994 Toyota: SAS, 5.29s, LONGS, Lockrights fr/rr, 5" of lift, 35" MTRs, 20lb CO2, Homemade Front/Rear Bumpers, Lots of dents and scrapes, but Marlin himself signed my truck.

6.72:1

Well hello. You are close to me. Finally another East Coast person!
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

Project94

Do you know Rick, he's the president of the AL chapter of TTORA.  He's a good guy, I rode with him at Summertown once, and helped out when he built his tube bed.
1994 Toyota: SAS, 5.29s, LONGS, Lockrights fr/rr, 5" of lift, 35" MTRs, 20lb CO2, Homemade Front/Rear Bumpers, Lots of dents and scrapes, but Marlin himself signed my truck.

6.72:1

I don't believe I know him.
[email protected]
Cell: (205) 919-3290
www.Kupferphotography.com

KWP

88 Toyota truck ( Under Construction ) Dana 60's front and rear 5.38's, welded diffs, 3inch Downey rears up front,one link rear with aerostar coils rolling on 39.5x16.50/17 Pittbull Rockers and 17x9 Pro Comp extreme alloys.http://board.marlincrawler.com/index.php?topic=40816.0