HOT DAMN!!!! HOW SLOW CAN YOU GO?! HAHAHAHA

[crawlerdan]

WELL, I PUT MY DUAL ULTIMATES IN TODAY, THANKS AARON!!
TOOK ONLY TWO HOURS AT WORK, WELDED THE NEW CROSSMEMBER IN AND AWAY WE GO, ALSO TRUSSED AND ADDED A SKID PLATE TO THE IFS, SEEING AS I WILL PROBANLY BE USING IT ON THE RUBICON AT LEAST ONCE! BUT WHEN IT WAS ALL DONE I DID SOME BRAKESTAND BURNOUTS AT 650RPM!! YAHOO!

[crawlerdan]

heres some more of the new rear driveshaft,skidplates, ect

[Ferg]

Marlin's triple cased unit goes 23 HOURS per mile!

[UNBREAKABLE]

In my '92 I'll be gearing down to 580:1

[crawlerdan]

i was 439-1 in my 85, but this will be a little more realistic at 223-1

[4DEES]

WELL, I PUT MY DUAL ULTIMATES IN TODAY, THANKS AARON!!
TOOK ONLY TWO HOURS AT WORK, WELDED THE NEW CROSSMEMBER IN AND AWAY WE GO, ALSO TRUSSED AND ADDED A SKID PLATE TO THE IFS, SEEING AS I WILL PROBANLY BE USING IT ON THE RUBICON AT LEAST ONCE! BUT WHEN IT WAS ALL DONE I DID SOME BRAKESTAND BURNOUTS AT 650RPM!! YAHOO!

please tell me you took pics of the burnouts!   

[WHITE_TRASH]

Its a good way to get funny looks.  I power brake mine all the time just to screw with people.

[crawlerdan]

ill post pics o the bnurnouts tomarro

[4DEES]

ill post pics o the bnurnouts tomarro

SWEET!!!! 

[toybuilt]

looking good, get those burnout pics!

[Hyena]

Im at 223:1 also.  You get some funny looks when you put it in double low first gear and let out the clutch with your foot on the brake.  No gas and the rear tires spin by themselves.  I feel like a bad ass when i do it. 

[*FFC*]

Im at 223:1 also.  You get some funny looks when you put it in double low first gear and let out the clutch with your foot on the brake.  No gas and the rear tires spin by themselves.  I feel like a bad ass when i do it. 

You forgot the part when the ass sticks up in the air and it looks like it's constipated

[unclejpl4x4]

SO craw honney      what  did you need to do it?  like parts and stuff

[Hyena]

You forgot the part when the ass sticks up in the air and it looks like it's constipated

That too.

[crawlerdan]

SO craw honney what did you need to do it? like parts and stuff

um? well i put in a dual ultimate case with twin sticks, a custom made crossmember that looks like the budbuilt one, a skidplate that toybuilt and i made, had a new rear driveline made using .250 wall tubing, i made the front, and i had to replace all necessary seals in the cases and the tranny

[*FFC*]

SO craw honney  

Hey, back off 

[crawlerdan]

ok, so here are some pics of the interior, and how the twin sticks came out in the cab, i did have to heat the sticks and bend them forward an inch, otherwise they hit the lid of the center console

[crawlerdan]

aaaand as for the burnouts.... well, they are at 1/64  mile per hour, so no smoke like yall where hopin, but, you canb see that the rear of the truck has lifted three inches or so, and then the evidence  

[*FFC*]

Look in good 

[sloyota]

how did you get wood trim in a toyota? is that factory?

[crawlerdan]

it had a factory wood trim kit in it, but it was all cracked, you can see that the ash tray is a lighter wood, the rest is new. they dont make the kit any more, so i made it all using 05 landcruiser peices

[BLACKDOG]

it had a factory wood trim kit in it, but it was all cracked, you can see that the ash tray is a lighter wood, the rest is new. they dont make the kit any more, so i made it all using 05 landcruiser peices

I was going to say, that interior is lookin pretty dang sexy I cant wait to put dual cases in my truck, but I'll be waitin a while to do that.  Gotta et the stupid thing running (again) on the street first

[crawlerdan]

sexy huh?? whacha all think of the steering wheel? betcha cant guess where it came from!

[Jafa]

god knows! looks kinda like an AC Cobra one or mebbe some old English POS like a MG or somethin

[crawlerdan]

well, your first guess was close! its out of a 67 shelby gt500 mustang, ooooooooooo, realwood!!  

[*FFC*]