my rig"bernice"

Started by BONER, August 08, 2005, 05:57:26 PM

0 Members and 3 Guests are viewing this topic.

eddyb

Quote from: Stinky on February 14, 2008, 12:02:02 PM
.....im tryin to get rid of the the stupid ass cap too....

There's room for one on top of boners garage.
A bad day of wheelin' is better than a good day at work

BONER

dude i do agree with you ohiopyle doesnt really challenge us anymore. i go to mem day more to hang out with the best people in the world : you guys. to me hangin with the people i dont see too often is the best part so if i get hurt  i apologize.  i say we start to do labor day in your turf .its only fair and it its a good reason to get together. i understand the money thing too, i havent gotten rich recently. im in for charlotte. adam if your pockets were as big as your schlong you would owe all of us money.
93 toy extended cab, chevy 305,sm465 tranny with 6.39:1 first gear, np205 transfercase ,lincoln locked v6 third in front,marlin sas ,4 link out back , bonerbuilt bumpers and paint,37"SSR's, generic steelies, 16"bed bob,fuel cell,bonerbuilt roof rack, square front driveshaft,95 prelude seats,sparco harnesses,bedlined floorpan and lots of mojo.and some shiny new things.

Stinky

Quote from: BONER on February 14, 2008, 04:14:01 PM
dude i do agree with you ohiopyle doesnt really challenge us anymore. i go to mem day more to hang out with the best people in the world : you guys. to me hangin with the people i dont see too often is the best part so if i get hurt  i apologize.  i say we start to do labor day in your turf .its only fair and it its a good reason to get together. i understand the money thing too, i havent gotten rich recently. im in for charlotte. adam if your pockets were as big as your schlong you would owe all of us money.

x2   especially the adam part haha
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

furrballs95

dude i'm down for wheelin sat, sun, and monday of memorial day weekend. :driving: i didn't spend i don't know how much money and time on my truck to just have it sit there the whole time.  I do agree with shane that we start doing labor day down in your kneck of the woods scooter.  i'm already planning on going to uwarie for that offroad comp soo scooter i'll need a co driver   :idea: :driving:
95 Toyota p/u 3.0 v6. Marlin SAS with 5"springs, 30 spline bobby longs, and a welded V6 third in a trussed 85 front axle. 529's front and rear, Marlin rear kit with 5" springs, lockrite rear locker,  36"  IROCKS on 15x10 black rock crawlers, custom front and rear bumpers,

MudSlinginYota

hopefully i will be scotts spotter (my specialty) for Uwharrie.  i just hope i can get him up there before the event to show him the trails cause if not.. Scott your gettin smoked by the regulars. i see they are doin the rocky mountain loop or i think thats what the flyer said, either way scott just do what i told you to your jeep and we will kill them.

as far as bringin the yinz to the yalls i think URE would be a great place for it. theres lines that only the big boys will do or theres bypasses for stock s-10's...and ed. its only 2 hours from raleigh too  :thumbs: so when ALLLL of you can figure out how to pull the thumbs from yee bums and come down here to wheel let me know the date so i can tell my boss to suck a FU(K
1986 toyota 4runner http://board.marlincrawler.com/index.php?topic=61257.0
1997 dodge ram 4x4 (for sale)

eddyb

with 257,000 miles there is no way the General will be making a trek to NC.  And I think I can handle a little more than s-10 trails.
A bad day of wheelin' is better than a good day at work

furrballs95

well adam you better plan on being a spottter for 2 people than  :_order:
95 Toyota p/u 3.0 v6. Marlin SAS with 5"springs, 30 spline bobby longs, and a welded V6 third in a trussed 85 front axle. 529's front and rear, Marlin rear kit with 5" springs, lockrite rear locker,  36"  IROCKS on 15x10 black rock crawlers, custom front and rear bumpers,

Stinky

spotters?!?!?!

wat is this, amateur hour?!?!?!?!?!
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

MudSlinginYota

i think i can handle it

shut it shimp richard nick
1986 toyota 4runner http://board.marlincrawler.com/index.php?topic=61257.0
1997 dodge ram 4x4 (for sale)

Mac5005

well so far, my dad is running the stock class with the suburban, im running stock modified, and furry is going to run modified class.   Adam, I want to at least try to pre-run at least twice, but i need you as my spotter badly.   My dad needs a spotter, and furry will need one too.  So i was thinking that we can all just switch off, who is spotting who......its not really the case of a spotter, its more of a codriver, and everyone has to have one unless you are running a single seat buggy.
YJ - 4.7L-Ax15-D300(4:1)-D60/14B, lockright/spool 5.38's, 108" WB, 42" SX-2's

BONER

theres a chance i can spot
93 toy extended cab, chevy 305,sm465 tranny with 6.39:1 first gear, np205 transfercase ,lincoln locked v6 third in front,marlin sas ,4 link out back , bonerbuilt bumpers and paint,37"SSR's, generic steelies, 16"bed bob,fuel cell,bonerbuilt roof rack, square front driveshaft,95 prelude seats,sparco harnesses,bedlined floorpan and lots of mojo.and some shiny new things.

Mac5005

#1511
-  So i'm not getting the other jeep, it kinda got sold out from under me, by accident, so no hard feelings...will have the video link up soon
YJ - 4.7L-Ax15-D300(4:1)-D60/14B, lockright/spool 5.38's, 108" WB, 42" SX-2's

Mac5005

that one kinda sucks, ill have a better one coming up shortly, and then an awesome one in a few hours
YJ - 4.7L-Ax15-D300(4:1)-D60/14B, lockright/spool 5.38's, 108" WB, 42" SX-2's

Stinky

http://board.marlincrawler.com/index.php?topic=31186.0

well well, i think i might have just found something new to build..... just tie a frame in under it..... haha these things are cool as hell, especially page 2... and very odd finds..... i have 2 solid axles n wouldnt need anything over 35s............. hmmmmmmmmm... haha
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

MudSlinginYota

haha the one on page two looks like an old runner from the front... kinda lol
1986 toyota 4runner http://board.marlincrawler.com/index.php?topic=61257.0
1997 dodge ram 4x4 (for sale)

Mac5005

http://www.screencast.com/t/OhlnmRxP     here is the link to the high resolution video,   
YJ - 4.7L-Ax15-D300(4:1)-D60/14B, lockright/spool 5.38's, 108" WB, 42" SX-2's

MudSlinginYota

yea that more like tellico than URE
1986 toyota 4runner http://board.marlincrawler.com/index.php?topic=61257.0
1997 dodge ram 4x4 (for sale)

Stinky

hahahahhahahahahaha, i dunno if you guys have seen this video yet, but its pretty damn funny

http://www.youtube.com/watch?v=sIQrBouWRiE

make sure your audio works!!
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

Stinky

awesome vid scot!!  where dat :pokinit: be??       end of story, im building a buggy and moving south.....

i loved the 4.0 on the rev limiter HA HA HA HA HA  YOU DONNO haha....and the exo'd taco at the end
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

Stinky

#1519
just surfin around here on the comp, found some pics yall might enjoy:

only in a Honda


bone's tatoooooo




truths in life:




a random sighting in williamsport one day, not bad for a cell phone pic from 40' away




ratchet shifter wat???


this one could get me in trouble, buuuuuut theres nothing really shown.....



and for the GRAND FINALEEEEEEEEEEEEEEEEEEEE: hahahahaha i almost pissed myself when i saw this, it was on campus, parked RIGHT NEXT TO ME when i left the library last night......

haha im gonna have to get him to take it to the sticker power dyno n see the total output.....the WHOLE CAR WAS COVERED WITH STICKERS
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

BONER

great vids. i need a welder cover like that. scott did  u take that video? stinky that car is way faster than your old truck.
93 toy extended cab, chevy 305,sm465 tranny with 6.39:1 first gear, np205 transfercase ,lincoln locked v6 third in front,marlin sas ,4 link out back , bonerbuilt bumpers and paint,37"SSR's, generic steelies, 16"bed bob,fuel cell,bonerbuilt roof rack, square front driveshaft,95 prelude seats,sparco harnesses,bedlined floorpan and lots of mojo.and some shiny new things.

Mac5005

yeah I shot the video, i want that welder cover too, i saw that same car last night, sumbiatch smoked my jeep by like 8 car lengths.....whhhhhooooooo daannnngggg
YJ - 4.7L-Ax15-D300(4:1)-D60/14B, lockright/spool 5.38's, 108" WB, 42" SX-2's

Mac5005

i like the new tat shane......tat tat tat it up
YJ - 4.7L-Ax15-D300(4:1)-D60/14B, lockright/spool 5.38's, 108" WB, 42" SX-2's

Stinky

ohhhh myyyyyy GOOOOOODDDDDDDDDDDDDDD  hahahaha, i thought of building one of these soooooooooooooooooooooooooooooooooooooooooooooooooo long ago.....if i would've seen this 4 years ago, i would have never built a toyota........kinda happy i didnt tho.......

http://www.youtube.com/watch?v=EcXC5IUOdFk

http://www.youtube.com/watch?v=tfA8B0oool4

now back to typing an ethics paper..


bone, ill be home fri, i need to get me fenders n shiiiiiit, so i may come out to the shop early, then prolly just hangin around canonsburg for the evening..... doin some wheeeeeeeeeelin in uniontaaaan saturday with little mikey, should be interesting, ill take plenty picachaaazzzzzz
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

marky mark

wow that place is sick scott.  Little outta our league though haha.  well I spent a day out at boners shop and got my 4.0 put back together for the most part.  Gotta take a trip out to summit racing on saturday and hopefully pick up a set of hedman headers for it. and i'm still waitin on the junkyard to call me when the get my harnes outta that explorer.  But anyways heres some craptastic cell phone pics fo yalls.



93 ranger. Dana 30 SAS with radius arms and coils in front. 8.8 ford posi rear. 35" mickey thompson baja claws. 4.0 V6 with BBK supercharger. 6 inch superlift suspension, . Hella lights. and a T-handle shift knob made out of a Toyota center pin and spider gears.

BONER

that car is awesome we wheeled that in a loked up 4 door wrangler and it was tough/scary. wait til its done scooter.yes we have 2 engine builds,soon to be 3 , 1 jeep fiberglass body conversion, 1 mustang to paint and the day to day jobs. it must be spring, so much stuff to do and i wanna build the burban.
93 toy extended cab, chevy 305,sm465 tranny with 6.39:1 first gear, np205 transfercase ,lincoln locked v6 third in front,marlin sas ,4 link out back , bonerbuilt bumpers and paint,37"SSR's, generic steelies, 16"bed bob,fuel cell,bonerbuilt roof rack, square front driveshaft,95 prelude seats,sparco harnesses,bedlined floorpan and lots of mojo.and some shiny new things.

Mac5005

ahhhhh hah hah hah hah muah hah ha ha ha haha   muuuuahhhh hah hah hah ha
YJ - 4.7L-Ax15-D300(4:1)-D60/14B, lockright/spool 5.38's, 108" WB, 42" SX-2's

marky mark

93 ranger. Dana 30 SAS with radius arms and coils in front. 8.8 ford posi rear. 35" mickey thompson baja claws. 4.0 V6 with BBK supercharger. 6 inch superlift suspension, . Hella lights. and a T-handle shift knob made out of a Toyota center pin and spider gears.

Stinky

hahahaha, that i DO......

quick story, rather entertaining.....so im sitting here 6 pages deep in a paper(single spaced mind you) and my buddy hunter calls me n is like lets go out..... i said no, but its dollar drinks 8-12 at the neighborhood bar on his tab, so i agree, finish my paper, we go to the bar..... were there a while, tons of poon.....then all of a sudden a 12+ person wall comes flying by me, fists flyin haha...smartass me, laughs as this massive bar fight flies past me.... 2 secs later 3 dudes come flyin past me n a friend of mine goes HOLD MY BEER IM GETTIN IN ON THIS :pokinit: haha, im holding his beer, 2 dudes come flyin at me, one falls the other stands tall n looks at me, the one he knocks down sucker punches him in the richard n he knocks a beer all over me, so i set my buddy's beer down, one punch him, n just he looks at me like wat the flop?!?!?, goes to swing n i just grabbed his face n shove it aside and as he goes through the table next to me, i MATRIX the beer off the table as it goes down....... longerrrr story short, the bar owner kicks all the tools out, locks the door, shakes my hand n FREE SHOTS to everyone left in the bar........first bar fight they've had in over 2 years......

its always the nights you either dont plan on going out on or the ones when you dont plan on getting hammered, they always seems to be when :pokinit: goes down, but its 3:43 am n i have math to do yet...see a few of yall tomorrow
87 p/u SAS, 22RE, built, then cut up and scrapped

94 ex cab P/U, SR5, fully loaded, 3.4 swap, r150f, a/c, bumpers, 33s, glass fenders...sold

00 Stoopid Duty 250, ex cab, lariat, v-10,000

94 reg cab, 22re, duals, 38.5 boggers, sas, 4 link, tube bed, build underway... http://pirate4x4.com/forum/showthread.php?t=967836

88 Samurai, soa, buick 3.8, th350, zuki case, 1/4 done... anyone wanna buy it??

BONER

wow where is everyone?
93 toy extended cab, chevy 305,sm465 tranny with 6.39:1 first gear, np205 transfercase ,lincoln locked v6 third in front,marlin sas ,4 link out back , bonerbuilt bumpers and paint,37"SSR's, generic steelies, 16"bed bob,fuel cell,bonerbuilt roof rack, square front driveshaft,95 prelude seats,sparco harnesses,bedlined floorpan and lots of mojo.and some shiny new things.