0 Members and 6 Guests are viewing this topic.
Seems to me that you could lay the two intake gaskets over each other to determine which hole are common and which are not. Then make a ~3/8" aluminum plate to adapt one bolt pattern to the other. The common holes will need longer bolts or studs. The bolts for the not common manifold side will need to be checked for length. Those not common in the head will need to be countersunk in the adapter.
Started by 907yota Toyota Pickup/4Runner Tech 1979-95
Started by hotrod Engine
Started by 22remud Project Research and Build-Ups
Started by 82 HiLux « 1 2 3 » Engine
Started by Jokeass-Wheelers Toyota Pickup/4Runner Tech 1979-95