noob form NJ

Started by unclejpl4x4, April 12, 2005, 03:54:04 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

unclejpl4x4

April 12, 2005, 03:54:04 PM
HI every one :wave:

I'm from southern NJ    and   have had my 93 toy pick up for some time now.
It has a 3" body lift and was nice loooking when i got it  but now just looks like a beat traill rig  that needs some loving.

I actualy have not been wheeling in a while do to I got hooked on a online game "planetside" :hammerhead:  and spent money on comp parts insted of truck parts. If U vist my web site U can see how outdated it is www.pinelands4x4.com

well it's time to do some loving to my truck and will be looking/asking ???
I turn wrenches for a living  atm i have been with cat for the last 5yrs+  my welding sucks but i am good with hydro/electrical/breaking stuff.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

KWP

#1
April 12, 2005, 05:43:41 PM
  :welcome: to the board :beer:
88 Toyota truck ( Under Construction ) Dana 60's front and rear 5.38's, welded diffs, 3inch Downey rears up front,one link rear with aerostar coils rolling on 39.5x16.50/17 Pittbull Rockers and 17x9 Pro Comp extreme alloys.http://board.marlincrawler.com/index.php?topic=40816.0

FATB0Y

#2
April 12, 2005, 05:49:57 PM
 :thumbs:  :welcome:

94toytruck

#3
April 12, 2005, 06:05:26 PM
 :thumbs: east coast wheelers :greengrin:

You even make it to PAP or RC? We wheel there alot. Welcome to the board.
95 x-cab truggy, 39 pitbull's on KMC's and 60/14b with chromo's, ultimate duals, linked and Co'ed

www.rightcoast4x4.com<<<get it

No Power

#4
April 12, 2005, 06:15:38 PM
Howdy :welcome:
What kind of upgrades are you looking to do to your truck ???
Straight axle, diff gears, crawler box, bob & dovetail the bed, engine swap?
Roll me back over !!!

ozzy93xtra

#5
April 12, 2005, 06:49:31 PM
 :beerchug:          its alright to have i.f.s (i got it 2)




























:rivers: not really but money sure dont grow on trees Nice yota :thumbs:
M- I- S- S- I- S- S- I- P- P- I- B- O- U- N- D-

oddball

#6
April 12, 2005, 08:46:12 PM
 :worthless: :beer:  :welcome:
2008 Tacoma regular cab, 4.88s, ARBs, crawl box, manual shift FJ case

scheid6996

#7
April 12, 2005, 08:47:35 PM
 :welcome:
When i die, i wana Be buried face down, so anyone who doesnt like me can kiss my :moon:


Its a redneck thing
"Nobody Loves Me"

unclejpl4x4

#8
April 13, 2005, 04:37:43 AM
thx guys 

as for upgrades   the truck is my every day driver so  it can't be to much.  but i would like to add 3-4" under that body lift and a rear locker  and maybe 35"   

I need to straiting out the engine first and that broken leaf spring and shock from the last midnight trial run i did.  when a friend says o just jump that woop  "just say no"
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

gonzo

#9
April 13, 2005, 06:50:50 AM
Hey Uncle :welcome: Got Pics?

unclejpl4x4

#10
April 13, 2005, 02:46:04 PM
Quote from: gonzo on April 13, 2005, 06:50:50 AM
Hey Uncle :welcome: Got Pics?

http://www.pinelands4x4.com/   <----- clicky click   I don't have any new pics thos ones are year+ old  wish the truck still look like that :(
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

#11
April 13, 2005, 05:50:22 PM
you really dont want more than 2 " body lift,   3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame  :smack:  :ack:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ozzy93xtra

#12
April 13, 2005, 06:30:36 PM

Quote from: 79Coyotefrg on April 13, 2005, 05:50:22 PM
you really dont want more than 2 " body lift, 3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame :smack: :ack:


:psss: whats he gonna do with that truck?
M- I- S- S- I- S- S- I- P- P- I- B- O- U- N- D-

TEXXX

#13
April 13, 2005, 11:08:52 PM
 :welcome:  :greengrin:
RIP Gatekeeper you will be missed!

86 4runner

#14
April 14, 2005, 01:29:56 AM
 :welcome:  :beer:
86 4 Runner SAS, 37 inch Toyo M/T's, E-Locker rear, Lock Right front. 30 spline Longs, 5.29's, Dual Cases, Warn XD9000i

unclejpl4x4

#15
April 14, 2005, 04:49:42 AM
Quote from: 79Coyotefrg on April 13, 2005, 05:50:22 PM
you really dont want more than 2 " body lift, 3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame :smack: :ack:

Quote from: 79Coyotefrg on April 13, 2005, 05:50:22 PM
you really dont want more than 2 " body lift, 3-4 inch suspension lift and a little metal massageing is way better, lots more stable


saw a 94 toy today that got rolled dude had just put a 4 inch body lift and tires on it first bad curve he went into after leaving the shop he rolled it and the cab came off the frame :smack: :ack:


lol what a noob. 
YA i got my truck with the 3" kit on it the truck was all pretty and shiny  no mud or dirt  not even under the hood , like never been off road clean.  THe truck dose have some  body roll   and i do nurse it around unknow turns   but the ones i drive around every day,  the truck handles nicley.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

#16
April 14, 2005, 06:38:46 PM
it looks sweet   


i think i'll stop and see what dudes gonna do with that rolled truck,



mine handles curves like a car , but suspension is a old blackdiamond from way back when
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ozzy93xtra

#17
April 14, 2005, 07:09:03 PM
Quote from: 79Coyotefrg on April 14, 2005, 06:38:46 PM
it looks sweet


i think i'll stop and see what dudes gonna do with that rolled truck,


:thumbs:  :yesnod:  :beerchug:
M- I- S- S- I- S- S- I- P- P- I- B- O- U- N- D-
Print
Go Up Pages1
User actions