3RZ-FE Valve Cover Decal

[Pappy]

Have a Gen1 Tacoma, or Gen3 4Runner with the 2.7L engine? Have you installed a 2.7L in your older junk? Ever wonder why Toyota didn't make a nice valve cover decal for the 3RZ-FE like they did the 20R/22R/22RE/1FZ-FE? Well, this inquiring mind also wanted to know. With my current 3RZ project I decided to take care of that, mostly for selfish reasons. Of course, just making one is silly, so I had a bunch made.

I have three flavors. One with a heavy chrome border, one with a thin chrome border, and one without a border. All are $8.00 each mailed within the USA. They are silkscreen printed onto a high temp chrome polyester with a permanent adhesive. Get them for your valve cover, rear windows, tool box, air compressor, or work bench. Heck, get one for your water heater. Just keep in mind that the material will bend around something in one dimension, but it won't mold to non-flat surfaces.

I take Paypal to [email protected]. Shipping from New Mexico, 87120.

Please make sure to include your address, and tell me which flavor you want.

[Capra]

Noyce

[:)bestgen4runner]

Bump for something cool that I want

[liveoak]

J

[Pappy]

Just ordered one. Thanks for making these Jon.

Thanks Chris. Got it and will mail today.

[liveoak]

[

[Ritchie]

What did you paint the rocker cover with?  Looks great.
I'll PM you for an order of 4 stickers.

[Pappy]

What did you paint the rocker cover with?

The cover was powder coated.

[Pappy]

What did you paint the rocker cover with?  Looks great.

Glamour shot.

[Pappy]

This is almost a year old. Time for a bump.

[OVRAROK]

This is almost a year old. Time for a bump.

Sent you a PM..

[yoshaleng]

I WANT ONE!

[trdwssrs]

Glamour shot.

Pappy, Getting ready to send you an order (PayPal) for (1) 3RZ-FE Valve Cover Decal with Black border. This is what it will be stuck on...
BUILT BY Jim Putney at 22RE PERFORMANCE

[Pappy]

I think after a year it's time for a bump.

[Pappy]

OK, time to move this back to the top.

[Ritchie]

Sticker looks great.

[Pappy]

Time for a bump since my project is installed and running.

[Gnarly4X]

Hey Pappy....

Why is the engine sitting at what appears to be about a 5 degree angle from horizontal?

Just curious.

Gnarls.

[Pappy]

Simple, it's supposed to be. The level on these engines is not the valve cover, but the power steering pump.

[OVRAROK]

Time for a bump since my project is installed and running.

How you liking that supercharger jon?

[Pappy]

How you liking that supercharger jon?

Jury is out since I've only been driving it for a couple of days. I didn't run the engine before and after. I can say I love this engine. I live at 5000ft elevation, and I put the SC on because it's not uncommon to travel to 10K+ in the Innermountain West. Also, I bought the low boost (4#) SC. I didn't want to get carried away and I wanted to preserve the engine as long as possible.

[OVRAROK]

Jury is out since I've only been driving it for a couple of days. I didn't run the engine before and after. I can say I love this engine. I live at 5000ft elevation, and I put the SC on because it's not uncommon to travel to 10K+ in the Innermountain West. Also, I bought the low boost (4#) SC. I didn't want to get carried away and I wanted to preserve the engine as long as possible.

Hopefully you'll report back. Is motor stock other then SC?,

[OVRAROK]

Here's my sticker.

Sent from my SM-S928U using Tapatalk

[Gnarly4X]

Simple, it's supposed to be. The level on these engines is not the valve cover, but the power steering pump.

I kinda figured it was normal. But I have never looked under the hood of a vehicle powered by that engine.

[Pappy]

Hopefully you'll report back. Is motor stock other then SC?,

The engine was rebuilt and balanced. Even the balance shafts were balanced.