Topic: Zip locker question

[Rockfish 91XTRA]

Hey guys, I'm installing a complete 3rd member that I bought from MC.  It's a toyota v6 with 4.88s and a zip locker.  I'm installing this in a 91 star cab v6 p/u

The 3rd member came with a plug in the ABS port.  Should I remove the plug and install the ABS sensor or do I have to scrap the ABS with the new diff?

Need some advice ASAP.  Need to get this back together tomorrow

thanks!

[OOPS]

Does the ring gear have a tone ring on it? If not you will lose the ABS, it may also set some codes.

[Wainiha]

I thought the tone rings were on the outer ends of the axles shafts.  Is that only newer models?

[Rockfish 91XTRA [OP]]

The sensor on my 91 is located at 12 o'clock on the diff housing, just over the ring gear.  I don't see anything that looks like a tone ring.  Then again I've never seen a tone ring.

Any help is appreciated!

[Goldrush]

Just take that freeze plug out and install your ABS sensor.

[Rockfish 91XTRA [OP]]

Roger that.  I popped the plug out last night and plugged in the sensor.  I haven't had tested it but after lookin everything over closely I couldnt see any difference between the new and old diff. 

Thanks guys!

[ecrum428]

Must be that the sensor picks up the teeth on the ring gear as the tone ring.

[OOPS]

I thought there was a tone ring on the ring gear.