Topic: Need: Heater Valve, DL Yoke

[Caboose]

I need a lot more than that but for right now I really need a DL yoke from a 2nd gen p/u, and a heater valve from a first gen pickup.

[John Doe]

pic of exactly what you need for the driveline, I may have what you need.

[Caboose [OP]]

Just need the flange for the drive line going to the diff and if you have the tcase side that would be cool too.  For some reason my triple drilled flange doesnt have 81 pattern on it.  The heater valve is the one that has the intake and output coming off the left (2nd gens had the intake on the left, output on the right).  At work cant get pics.

[garlicgabe]

  I have two.  The stock ones that are on my 81 axles.  I have the transfer side also.  I can check it against the triple drilled one I have.

 

[Caboose [OP]]

I would appreciate it.  Thank you.

[garlicgabe]

I checked the flanges on the 81 driveshaft  to my triple drilled and you are correct.  It does not line up.     I do have both flanges off the front and rear diffs.  I am going to get under my truck today and check it agianst the transfercase flange.  It does however line up with the flanges off an 85 driveline. 

Gabe.

[84toyota4x4sr5]

I have a  heater valve from an 81 that I'm parting out if you're still looking for one

[Caboose [OP]]

Still looking for a DL yoke (non cv) and a heater valve.

[garlicgabe]

I have a front driveline off a 85 complete. 

[Caboose [OP]]

How much?