Topic: F.N.G. Dennis

[ogre]

Hello all,
It is great to be here. Looking for some insight into the world of Driveline. Just replaced my clutch on my 04 Tacoma 4x4 with a "6 puck" style clutch and all that goes with. It shakes like heck in first and second. It also seems to sound like the Throw-out bearing is bad, but I think it is the input shaft bearing. 110,000 miles. R150f, 31" tires. Is this shake normal...the shake has not changed at all. It is bad all of the time. Could this be driveline slop?
Dennis

[874runnertoys]

NICE TO HAVE YOU ON BOARD DENNIS  2 MARLIN

[BIGdrew]

I don't think it would be the drive line...esp if it only happens in first and second gear???

[yoshaleng]

Are you sure that you propperly tightened the clutch? I beleive if it's your drive line, it would shake or vibrate every gear.

by the way, 

[Goldrush]

welcome.. well the ceramic clutches chatter i know that....and the way it sounds, thats what the problem is..

[ogre [OP]]

Thanks for all of your input. I have decided to replace the new clutch disc with a stock (conventional ) one.
I'll let you know what happens.
Dennis

[Goldrush]

cool. ya keep us posted!

[Rocksurfer]

[greg_k113]

F.N.G. You have to be a Jarhead.

[Goldrush]

F.N.G. You have to be a Jarhead.

why do you say that?

[greg_k113]

F.N.G was used heavily when I was in the Marine Corps.

[Offroadassassin]

191,000 on my 04  what brand clutch pack did you get? why didnt you replace the throwout bearing when you replaced the clutch?what about the pressure plate did it come with the pack?

[yotaneck13]

from PA

[axled89]