Author Topic: '75 4x4 re-do and upgraded  (Read 4123 times)

0 Members and 1 Guest are viewing this topic.

wilderXJ

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
'75 4x4 re-do and upgraded
« on: Oct 28, 2010, 03:19:21 PM »
Ok here is what I got (sorry no pics, still new to board) 1975 Hilux that was converted to 4x4 in the late '70's, b4 the 1st Toyota 4x4, with an early Jeep Dana 28 closed knuckle front axle (drum brakes! :smack:) and a divorced Dana 20 t-case. 20r has been replaced with a 22r, Still has the old 2wd rear end, and 2wd 4speed tranny.  Other than the cab floor and minor frame rot, its solid.  Starting with upgrades on the rear. Took the bed off, removed the nasty gas tank that had been hammered to fit, the shocks that were held on with nails for cotter pins, and bailing wire on the bottom cause the stud was too short for the shocks.  Cutting all other bs off.  Cleaning frame to patch and paint.  Will make new rear cross memeber, and  move the rear spring hangers back to the rear frame stubs, bob and dove tail the bed, fuel cell and cage.  Getting a rear end from and IFS truck to replace the 2wd one.  Not decided on what to do for rear springs, dont want to the chevy spring thing, so i gotta do a little more research on the subject before I set on a plan.

Jumping to the front quickly I question, will the Jig for the SAS rear spring mount location work with my 1975 2wd frame? thanks in advance

locked 4x4

  • Offline Crawler Guru
  • ****
  • Turtle Points: 0
  • Male Posts: 466
  • Member since Aug '09
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #1 on: Oct 29, 2010, 12:47:11 AM »
This thing sounds sweet.   lets see some pictures

wilderXJ [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #2 on: Oct 29, 2010, 05:30:03 AM »
pics comming soon! sorry cant post atachments yet

wilderXJ [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
Re: '75 4x4 re-do and upgraded (pics added)
« Reply #3 on: Oct 29, 2010, 10:27:09 AM »
ok now that i can post pictures, here is a few of when i got it, a few when i started working on it.


after she got home (had to add a little class  :hammerhead:)

had full dash, i have since stripped the hack wiring and int.



santa cruz crawler

  • Offline Crawler Guru
  • ****
  • Turtle Points: -7
  • Male Posts: 682
  • Member since Aug '10
  • Get Some
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #4 on: Oct 29, 2010, 03:03:15 PM »
thats a cleen pre gen 4x4   keep the buid and pitures rolllin

RockRescue

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Posts: 194
  • Member since Feb '06
  • Crawling with Marlin
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #5 on: Oct 29, 2010, 03:32:44 PM »
There is a truck just like yours  rt down the street from me  sitting on the side of a house .  its been SAS as well   funny

wilderXJ [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #6 on: Nov 02, 2010, 10:26:36 AM »
not much to update, been busy the last week with work/fam.  So all i got a coupple pics of the current front springs mounts.


and just because, this is one of my last rig, hince my screan name

poser shot

wilderXJ [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #7 on: Nov 19, 2010, 07:28:47 AM »
minor update.  Traded an old ranger pickup I had for some parts.  Got an IFS rear end, w56 trans w/a fwd shift case, and a set a wheels and tires.  Rear end needs a rebuild, budy had it apart to do so, but gave up on it.  Debating on a Disc conv. cause regardless the brake need total rebuild.  3rd mem is in good shape, going to put some new bearings in.  Pic soon, but the 3rd mem my buddy had in the front of his truck and pinion pre-load was F-up and would let the pinion grind into the carrier when in reverse, and the shocker is, no major damage, just going to smooth it out and run it i think.  I'll get the pic up, and ya'll let me know what u think?

Now all I need is a front axle and top-shift case. then get my A$$ moving!

SloCrawler

  • Offline The 1K Club
  • *
  • Turtle Points: -116
  • Male Posts: 1,333
  • Member since Mar '08
    • View Profile
    • http://board.marlincrawler.com/index.php?topic=60800.msg856812#msg856812
Re: '75 4x4 re-do and upgraded
« Reply #8 on: Nov 19, 2010, 09:29:24 AM »
I want a smog exempt yota..

87hillbillyoter

  • Offline The 1K Club
  • *
  • Turtle Points: -43
  • Male Posts: 1,066
  • Member since Mar '10
  • git er duuunnn!
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #9 on: Nov 19, 2010, 09:33:39 AM »
nice man that thing looks nice! i wish i had one of them pups haha i wanna see how this thing comes out
:usa:
1987 SAS'ed toyota 4x4 pickup 22re swap
build up- http://board.marlincrawler.com/index.php?topic=75111.0
:usa:

wilderXJ [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #10 on: Nov 19, 2010, 09:46:03 AM »
I want a smog exempt yota..

Just move to the Mid-West. its all smog exempt hahaha LOL.  (well most of it)


You could have a 92, with a 22re, take all the emmis controls off, cat, egr, you name, drive over the the DMV/ S.O.S. office and tag it.  At least here in IL, unless you live in Cook County (heart of Chicago) no smog testing to speak of

wilderXJ [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #11 on: Nov 19, 2010, 02:00:39 PM »

here is the damage

and my frame rot, only major rust on the whole truck (outside of surface/pin holes)

and this is the dana 20 that was in the truck

and not a good shot, but the ugly crossmeber that held the Dana 20.  Had pieces of rubber hose cut for bushings :confused:, but I guess at least they tried.

46&2

  • Hillbilly
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 8
  • Male Posts: 4,834
  • Member since Dec '05
  • California livin'
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #12 on: Nov 19, 2010, 02:19:52 PM »
That thing is big pimpin'! I love it. Those are pretty rare to find in one piece these days.
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

SloCrawler

  • Offline The 1K Club
  • *
  • Turtle Points: -116
  • Male Posts: 1,333
  • Member since Mar '08
    • View Profile
    • http://board.marlincrawler.com/index.php?topic=60800.msg856812#msg856812
Re: '75 4x4 re-do and upgraded
« Reply #13 on: Nov 19, 2010, 06:53:22 PM »
Go with F150 springs for the rear, if your lucky maybe you could find a Land Cruiser front axle with e-locker.

wilderXJ [OP]

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Male Posts: 25
  • Member since Jun '10
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #14 on: Nov 20, 2010, 12:43:11 PM »
phone wont let quote.  But pretty set on the f150 springs, chevys to long for me.  Been thinking about a cruiser axle but unless on the cheep prob not.

toygasm

  • Offline Rock Master
  • ***
  • Turtle Points: 31
  • Posts: 143
  • Member since Dec '08
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #15 on: Nov 20, 2010, 05:46:35 PM »
cool old toy.i dont think ive ever seen one of these in real life...guess they are pretty rare...or just rotted away.lol! lookin forward to yer build up. :biggthumpup:

muddytaco

  • Offline Rock Master
  • ***
  • Turtle Points: -2
  • Male Posts: 228
  • Member since Oct '08
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #16 on: Nov 21, 2010, 09:14:45 PM »
thing is pretty sweet like the lexus emblem
95 tacoma 5" revtek/bilstein detroit locked 9" with drilled and slotted rotors front and back, 8000# mile marker winch, 16" crager crawlers, too much other crap to mention
96 t100 2wd (soon to be sasd i hope) - dead
85 efi 4runner
01 sequoia

sckid831

  • Offline Rock Master
  • ***
  • Turtle Points: 19
  • Male Posts: 161
  • Member since Jul '10
    • View Profile
Re: '75 4x4 re-do and upgraded
« Reply #17 on: Oct 16, 2011, 07:21:55 PM »
what happened to this truck?

 
 
 
 
 

Related Topics

0 Replies
5019 Views
Last post Nov 16, 2002, 09:42:40 PM
by BigMike
28 Replies
8856 Views
Last post Aug 26, 2007, 07:05:20 AM
by V-Man
4 Replies
2146 Views
Last post Jun 18, 2006, 08:09:48 PM
by DTB
3 Replies
2202 Views
Last post Feb 10, 2013, 05:48:25 AM
by R.DesJardin
5 Replies
2671 Views
Last post Jun 21, 2013, 04:50:13 AM
by R.DesJardin