Topic: The Rear Shackle Hanger Thread

[MiniSimp]

It's time to bring back some organized tech to this place....

Let's see your custom Rear Shackle Hanger's

List Materials used, mounting location (front or back from stock), and results

and as always:


Marlin Crawler Shackles
Custom Mount Made from .25 wall DOM tubing cut in to .25 wall 2" square tubing.
Welded inside frame upside down.
Hanger is located 5" back, 1.75" up.

Result: Lowered rear suspension 1.75", improved pinion angle.

[MiniSimp [OP]]

Here are some that Oops made with Johnny Joint bushings:

[MiniSimp [OP]]

Here is the setup on the Marlin Crawler formula toyota:



Welded to a crossmember and mounted on the back...

[RN37DD]

i like it.. can you get a picture of the from the inside of the frame. I'm going to have to move the shackle back on my rig someday, and that looks better than welding it on the bottom.

[MiniSimp [OP]]

can you get a picture of the from the inside of the frame.

You can't see much, but it's added to the first post.

[jmsdad]

Here are some that Oops made with Johnny Joint bushings:

Beefy!  .5" thick shackles?

[OOPS]

Beefy!  .5" thick shackles?

It is what I had laying around the shop when I made them.

[Duffil]

[Cheesemaker]

Mini you don't want to include the hazards of improper grinder usage?   

[MiniSimp [OP]]

Mini you don't want to include the hazards of improper grinder usage?   

Different thread.

[Wermz84]

In, thanks for the chance.