Author Topic: locking hub question (Read 1046 times)

wildchild1066 · « **on:** Mar 15, 2008, 11:33:10 AM »

OK heres my problem when i go to put the most outer part with the dial on if it's in the lock postion it locks the axle but won't release . if i install it in the free position it won't lock the axle . do i have the spring in the gear in the wrong spot ? or something to do with the springs or gear assembly ? please help

79coyotefrg · « **Reply #1 on:** Mar 15, 2008, 11:56:24 AM »

something is definetly WRONG

take it apart and flip the spring

Willy Mammoth · « **Reply #2 on:** Mar 15, 2008, 12:06:18 PM »

Turn the dial to the left then push the locking gear in and to the left

till it stays all the way down. Then reinstall it.

The dial only turns so far, so if you don't have the locking gear in the correct position it won't move at all.

Homefries · « **Reply #3 on:** Mar 15, 2008, 06:11:06 PM »

http://board.marlincrawler.com/index.php?topic=30742.0

Here is the diagram from the FSM.

wildchild1066 · « **Reply #4 on:** Mar 15, 2008, 07:05:47 PM »

i got it thanks everyone

Author Topic: locking hub question (Read 1046 times)

wildchild1066

locking hub question

79coyotefrg

Re: locking hub question

Willy Mammoth

Re: locking hub question

Homefries

Re: locking hub question

wildchild1066 [OP]

Re: locking hub question

Related Topics


	Author Topic: locking hub question (Read 1046 times) 0 Members and 1 Guest are viewing this topic. wildchild1066 Rock Master Turtle Points: 0 Posts: 237 Member since Jul '05 i like cold bud and deep mud locking hub question « on: Mar 15, 2008, 11:33:10 AM » OK heres my problem when i go to put the most outer part with the dial on if it's in the lock postion it locks the axle but won't release . if i install it in the free position it won't lock the axle . do i have the spring in the gear in the wrong spot ? or something to do with the springs or gear assembly ? please help Logged UNLEASHED IN THE EAST 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: locking hub question « Reply #1 on: Mar 15, 2008, 11:56:24 AM » something is definetly WRONG take it apart and flip the spring Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way Willy Mammoth Gold Turtle Award Turtle Points: 0 Posts: 4,252 Member since Nov '04 Re: locking hub question « Reply #2 on: Mar 15, 2008, 12:06:18 PM » Turn the dial to the left then push the locking gear in and to the left till it stays all the way down. Then reinstall it. The dial only turns so far, so if you don't have the locking gear in the correct position it won't move at all. Logged American by birth, redneck by choice. Making Of http://board.marlincrawler.com/index.php?topic=6472.0 Sightings Of http://board.marlincrawler.com/index.php?topic=10805.0 Homefries Rock Master Turtle Points: 1 Posts: 241 Member since Apr '07 Re: locking hub question « Reply #3 on: Mar 15, 2008, 06:11:06 PM » http://board.marlincrawler.com/index.php?topic=30742.0 Here is the diagram from the FSM. Logged wildchild1066 [OP] Rock Master Turtle Points: 0 Posts: 237 Member since Jul '05 i like cold bud and deep mud Re: locking hub question « Reply #4 on: Mar 15, 2008, 07:05:47 PM » i got it thanks everyone Logged UNLEASHED IN THE EAST