Topic: looking for trail light wireing info on 3 gen trucks

[yota-tota]

i flat decked my 91 and am useing some combination LED tail lights in rear and it all works great and has been for almost a year but i noticed when i push my 4 way flashers only the front turn signals flash not the rears So i was wodering what's the colour code of the wire that controls the 4 way flasher in the rear? I have all the wires hooked up into a trailer brake converter except for one (green with red dashes) I checked it with the test light and didn't get any power through it so i'm not sure if it has to be tied into the tail light wire or what plus i don't want to have to take everything apart again and start from scrach to figure it out as it's all srink wrapped

[Bones1]

I had the same problem on my 81. I  put led's on rear and turn signals work great but for some reason my hazards dont work. As far as color code I couldnt tell you right now sorry, just wanted you to know you arent the only one with this problem...

[toyman1994]

Tice has my book otherwise I would tell you.  Tice look it up for us please, what is the green with red strip wire go to?