Author Topic: BRake Problem !!!!!!!!  (Read 1791 times)

0 Members and 1 Guest are viewing this topic.

unclejpl4x4

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
BRake Problem !!!!!!!!
« on: Jan 12, 2006, 05:36:24 PM »
well   it started after i got the truck  inspetion   and got failed  for the right rear  brake being way out of adjustment.   Adjusted the brake  went back  truck passed.

SO one day I'm  :driving:  along    doing about 55  put it in 5grear  pedal on the floor  my truck starts slowing down :crazy:
I pull over  and my left rear brake is hung up .  I  drove to the shop (on my b-day)  unadjusted that side  it's been  OK     not that i use my brakes.   Have not had time to pull the wheel  :shakehead:

So on my what home to night  the truck started pulling to the right    then i started to smell the brakes burn      left front  and right rear both.     I have never  ran across this problem in the 12yrs wrenching.        THE pedal feels great       maybe a proportion valve :dunno:
« Last Edit: Jan 12, 2006, 06:00:05 PM by unclejpl4x4 »
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

jimbo74

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 2872
  • Male Posts: 8,707
  • Member since Sep '05
    • View Profile
Re: BRake Problem !!!!!!!!
« Reply #1 on: Jan 12, 2006, 05:39:15 PM »
sounds like siezed parts
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
Re: BRake Problem !!!!!!!!
« Reply #2 on: Jan 12, 2006, 05:40:30 PM »
ya but   right front and left back  at the same time
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: BRake Problem !!!!!!!!
« Reply #3 on: Jan 12, 2006, 05:44:39 PM »
sounds like you got a broke spring back there,  only way to know for sure is take it apart

but the rear is a broke spring i garantee that,

left front  :think:  wore down till its eatin the rotor and grabbing
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
Re: BRake Problem !!!!!!!!
« Reply #4 on: Jan 12, 2006, 05:59:46 PM »
lol     front brakes are  about a yr old pads and rotoers    thet where around 50% when i was under there the otherday ......  as for the rear   the pads are good to  had the drums off   befor inspetion......clean them....... every thing looked good.................. ........ ...........   ya a spring dose sound plasable

as for the front  ......... i am lost    think  i'll go stick my head under thaer     i just wish i had tools at home to pull the wheels + jack up the truck  :mad:


I don't use my brakes  i down shift   maybe i will use 20% of my brakes    at a intersetion    or if some numb nut in front of me stops  thats about it.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

jimbo74

  • Offline Gold Turtle Award
  • *
  • Turtle Points: 2872
  • Male Posts: 8,707
  • Member since Sep '05
    • View Profile
Re: BRake Problem !!!!!!!!
« Reply #5 on: Jan 12, 2006, 10:47:04 PM »
you nkow, brake systems need to be upkept and use... if they jsut sit all the time, things deteriorate
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

unclejpl4x4 [OP]

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
Re: BRake Problem !!!!!!!!
« Reply #6 on: Jan 14, 2006, 09:50:55 PM »
took it apart today            could nor find anything wrong with the left rear    cleaned it up  and     left it weakly ajusted.

AS for the front right  2 of the 4 pistons where stuck   so i bang-on  a new caliper for 40$$. :beerchug:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

 
 
 
 
 

Related Topics

4 Replies
1863 Views
Last post Jun 22, 2004, 09:17:26 PM
by KYOTA
8 Replies
2627 Views
Last post Oct 17, 2004, 12:49:08 PM
by WHITE_TRASH
3 Replies
2039 Views
Last post Jan 21, 2005, 12:53:54 AM
by WHITE_TRASH
24 Replies
2604 Views
Last post Apr 29, 2007, 04:42:37 AM
by weirdtimes_7
2 Replies
1469 Views
Last post Jul 22, 2017, 05:39:14 AM
by Gnarly4X