Author Topic: 3rz to R151 info needed (Read 2111 times)

The_Blue_Coyote · « **on:** Jun 03, 2005, 08:48:24 AM »

Is there a bellhousing that will adapt a 2rz / 3rz to a R151?
I do know the 3rz will bellhousing will bolt to a W56, but need one for the R series.
Does the 5mge or 7mge BH fit the 3rz?

brainlessfool · « **Reply #1 on:** Jun 03, 2005, 11:15:18 AM »

I think you need the 22RTE bellhouing

Marlin · « **Reply #2 on:** Jun 08, 2005, 09:19:01 PM »

Sorry, I am not aware of any known bell to bolt the large 9 bolt R trans to the 2, or 3rz engine

mr4x42u · « **Reply #3 on:** Jun 08, 2005, 10:10:10 PM »

there is an adapter that was due out from I think advanced,,I ask the same question a year ago,,and some one posted the link..I might have it,,or mabe a search would bring it up...let me dig around my links..

The_Blue_Coyote · « **Reply #4 on:** Jun 09, 2005, 09:48:37 AM »

Thanks.
So far I have talked to Advanced, Marks, couple of vendor in OZ, and nothing is avaialble.
Looks like my friend will have to go to a 5vzfe or ditch the R151.

mr4x42u · « **Reply #5 on:** Jun 09, 2005, 08:28:33 PM »

I'm still looking,,but I know i saw a adapter for it..

Author Topic: 3rz to R151 info needed (Read 2111 times)

The_Blue_Coyote

3rz to R151 info needed

brainlessfool

Re: 3rz to R151 info needed

Marlin

Re: 3rz to R151 info needed

mr4x42u

Re: 3rz to R151 info needed

The_Blue_Coyote [OP]

Re: 3rz to R151 info needed

mr4x42u

Re: 3rz to R151 info needed

Related Topics


	Author Topic: 3rz to R151 info needed (Read 2111 times) 0 Members and 1 Guest are viewing this topic. The_Blue_Coyote Rock Crawl'n Turtle Points: -38 Posts: 81 Member since May '02 3rz to R151 info needed « on: Jun 03, 2005, 08:48:24 AM » Is there a bellhousing that will adapt a 2rz / 3rz to a R151? I do know the 3rz will bellhousing will bolt to a W56, but need one for the R series. Does the 5mge or 7mge BH fit the 3rz? Logged GOT LEAFS ? www.bluecoyoteracing.com 84 Totota 4x4 class 7S #797 brainlessfool It's not my problem if you can't hear the voices too. Gold Turtle Award Turtle Points: 2730 Posts: 4,207 Member since Jun '02 drive fast or the devil may get ya Re: 3rz to R151 info needed « Reply #1 on: Jun 03, 2005, 11:15:18 AM » I think you need the 22RTE bellhouing Logged A good day working, that's just sick Marlin Inspirational Genius 4WD Legend Turtle Points: 138 Posts: 856 Member since Sep '02 MC³ = 1,148:1 Re: 3rz to R151 info needed « Reply #2 on: Jun 08, 2005, 09:19:01 PM » Sorry, I am not aware of any known bell to bolt the large 9 bolt R trans to the 2, or 3rz engine Logged 1980 Toyota - 1997 3RZ-FE 2.7l Engine, Turbo R151F 4.31:1, Triple Turbo Marlin Crawler Billet (2.28x4.70x4.70) = 1,148:1 Crawl Ratio, Marlin Crawler Twin Stick and Short Throw Shift Kits, 30mm H/D Output Shaft, High Angle Drive Lines, 5.29:1, ARBs, High Pinion Front, 25mm HD Billet High Steer Kit, 6 Pin Locking Hub Bodies, 86+ Wide Rear End, V6 3rd member, Chromolly Axles all around, 37" IROKs with Beadlocks, York onboard air - Rollbar air tank, Premier Power Welder, Marlin Crawler 4" USA-made Leaf Springs, Bilstein Shocks, et cetera.... mr4x42u The 2K Group Turtle Points: 700 Posts: 2,233 Member since Sep '02 LOCKED AND LOADED Re: 3rz to R151 info needed « Reply #3 on: Jun 08, 2005, 10:10:10 PM » there is an adapter that was due out from I think advanced,,I ask the same question a year ago,,and some one posted the link..I might have it,,or mabe a search would bring it up...let me dig around my links.. Logged Forgiveness is between them and god.. Its my job to arrange the meeting! The_Blue_Coyote [OP] Rock Crawl'n Turtle Points: -38 Posts: 81 Member since May '02 Re: 3rz to R151 info needed « Reply #4 on: Jun 09, 2005, 09:48:37 AM » Thanks. So far I have talked to Advanced, Marks, couple of vendor in OZ, and nothing is avaialble. Looks like my friend will have to go to a 5vzfe or ditch the R151. Logged GOT LEAFS ? www.bluecoyoteracing.com 84 Totota 4x4 class 7S #797 mr4x42u The 2K Group Turtle Points: 700 Posts: 2,233 Member since Sep '02 LOCKED AND LOADED Re: 3rz to R151 info needed « Reply #5 on: Jun 09, 2005, 08:28:33 PM » I'm still looking,,but I know i saw a adapter for it.. Logged Forgiveness is between them and god.. Its my job to arrange the meeting!