Topic: Wheel cylinder

[GoldnGateYota]

Hello everyone, so I'm almost finished with my build. everything but the rear brakes are done. my drivers side rear brakes have been causing me problems. first i had to replace the wheel cylinder cause it was leaking. I got a new Aisin WC from Napa and installed it, bleed the brakes and tried to install the drum but it wouldn't fit around it. so i opened the bleeder valve to release pressure and i still couldn't fit the drum on. is there more than 1 style of wheel cylinders for the 89 axle?
any help is much appreciated!

[Cheesemaker]

You need to crank down the adjuster, put on the drum, and then adjust up the adjuster.

[GoldnGateYota [OP]]

the star adjuster is screwed in all the way and theres a gap in between the pushing fork and the brake shoe. only thing that seems to be stoping it from closing is the wheel cylinder.

[emsvitil]

Look at the other drum and see if everything is together correctly

[GoldnGateYota [OP]]

Hey everyone thanks for the help!! so after i looked at the cylinder on the other side i found that it had different numbers on it. so i brought the new one back to napa and found out the axle is off a 2 wheel drive truck and the cylinder i bought was for a 4x4. so switched it out and all is well!!!!