Topic: 89 Toyota truck 3.4 v6 no drivetrain

[KRT]

truck with 3.4 v6. Cab, frame, flatbed. Engine has a URD crank pulley and CAI.

I'm pulling the axles, springs, t cases and transmission for new project.

I'll include some spare parts
Second 3.4 with a bad block and not complete
Complete wiring harnesses from 1st gen Tacoma 5 speed
Tacoma crossover
Misc. Sensors

$1800 or trades looking for a ARB Toyota v6, AX15, CJ seats, CJ5 lift springs, and guns.

Truck is still together, so I'd need a little time to separate.
Also the dmv is a mess I'll try to get the truck on non op.

Email is best lewisprock@gmail.com
Located in Denair, CA
I'll put some pictures later today.

[84Flatbed]

I'll check back in for pics later. I take it this hasn't been reffed?

[KRT [OP]]

The truck has not gone to the reff. I was able to get it smogged a couple of times but I have let the registration lapse cause it needed a smog.

A little more on the truck, it has a salvage title, has dumb bedliner on the outside (didn't do it), has ruffstuff 10" coilover towers in the front. The bed is welded to the frame and bed mounts are gone.  Frame was cutoff by previous owner. The TG bumper can go with it. Also has TG sliders. Exhaust has the Tacoma CAT and a flowmaster(not positive) muffler. The drivers door has been pushed in and the mirror is busted.


Truck has hydro assist with YJ Pump and a tapped steering box. If this works for you then its the buyers, But I think I may have the stock toyota pump and I have a untapped steering box. Whatever works.