Author Topic: Transfercase output threads damaged (Read 1697 times)

Aaronm · « **on:** Aug 25, 2013, 09:44:03 PM »

I have a transfercase that has a output which looks like someone hit the end with a hammer when they were trying to dent the nut. Anyway I can't get a new nut to start without it trying to go sideways. Anyone know where I can buy a thread chaser this big or a trick to clean up the first three threads?

jimbo74 · « **Reply #1 on:** Aug 25, 2013, 10:20:43 PM »

can you get a file in there?

emsvitil · « **Reply #2 on:** Aug 25, 2013, 10:28:15 PM »

A very fine touch with a dremel cut-off wheel to chase the threads.........

Aaronm · « **Reply #3 on:** Aug 26, 2013, 07:08:38 AM »

Yes i can get a file in. How do I do the dremel? I am going to guess i carefully cut between the threads?

junya92toy · « **Reply #4 on:** Aug 26, 2013, 07:14:26 AM »

get a very small triangle file, and file the threads. Or buy a actually thread chasing file, it doesnt do much as remove metal as it puts it back in its place

Cheesemaker · « **Reply #5 on:** Aug 26, 2013, 10:56:19 AM »

A fine angle file and some patience will be the best option. Or find another output shaft.

Aaronm · « **Reply #6 on:** Aug 26, 2013, 09:53:12 PM »

Used a dremel and some patience and got it to work. Thanks for the help

Duffil · « **Reply #7 on:** Aug 27, 2013, 06:29:47 PM »

buy a threadfile. be done with it.

Author Topic: Transfercase output threads damaged (Read 1697 times)

Aaronm

Transfercase output threads damaged

jimbo74

Re: Transfercase output threads damaged

emsvitil

Re: Transfercase output threads damaged

Aaronm [OP]

Re: Transfercase output threads damaged

junya92toy

Re: Transfercase output threads damaged

Cheesemaker

Re: Transfercase output threads damaged

Aaronm [OP]

Re: Transfercase output threads damaged

Duffil

Re: Transfercase output threads damaged

Related Topics


	Author Topic: Transfercase output threads damaged (Read 1697 times) 0 Members and 1 Guest are viewing this topic. Aaronm Crawler Guru Turtle Points: 164 Posts: 404 Member since Jun '07 Transfercase output threads damaged « on: Aug 25, 2013, 09:44:03 PM » I have a transfercase that has a output which looks like someone hit the end with a hammer when they were trying to dent the nut. Anyway I can't get a new nut to start without it trying to go sideways. Anyone know where I can buy a thread chaser this big or a trick to clean up the first three threads? Logged What you've just said is one of the most insanely idiotic things I have ever heard. At no point, in your rambling incoherent response, were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul. jimbo74 Gold Turtle Award Turtle Points: 2872 Posts: 8,707 Member since Sep '05 Re: Transfercase output threads damaged « Reply #1 on: Aug 25, 2013, 10:20:43 PM » can you get a file in there? Logged The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission. ~ John F. Kennedy ~ emsvitil Silver Turtle Award Turtle Points: 7571 Posts: 3,561 Member since May '07 Re: Transfercase output threads damaged « Reply #2 on: Aug 25, 2013, 10:28:15 PM » A very fine touch with a dremel cut-off wheel to chase the threads......... Logged Ed SoCal 86 SR5 XtraCab 22RE W56B 31x10.50R15 Aaronm [OP] Crawler Guru Turtle Points: 164 Posts: 404 Member since Jun '07 Re: Transfercase output threads damaged « Reply #3 on: Aug 26, 2013, 07:08:38 AM » Yes i can get a file in. How do I do the dremel? I am going to guess i carefully cut between the threads? Logged What you've just said is one of the most insanely idiotic things I have ever heard. At no point, in your rambling incoherent response, were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul. junya92toy The 1.5K Club Turtle Points: -64 Posts: 1,500 Member since Nov '04 Drinking me beer Re: Transfercase output threads damaged « Reply #4 on: Aug 26, 2013, 07:14:26 AM » get a very small triangle file, and file the threads. Or buy a actually thread chasing file, it doesnt do much as remove metal as it puts it back in its place Logged Dr.Maxwe001 – well i have a 15 gal compressor now and if I gett he 60 and then use the 15 as a reserve that wil give me 75 gal thats close to 80 isnt it ? Cheesemaker Rock Ninja Gold Turtle Award Turtle Points: 1363 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: Transfercase output threads damaged « Reply #5 on: Aug 26, 2013, 10:56:19 AM » A fine angle file and some patience will be the best option. Or find another output shaft. Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen Aaronm [OP] Crawler Guru Turtle Points: 164 Posts: 404 Member since Jun '07 Re: Transfercase output threads damaged « Reply #6 on: Aug 26, 2013, 09:53:12 PM » Used a dremel and some patience and got it to work. Thanks for the help Logged What you've just said is one of the most insanely idiotic things I have ever heard. At no point, in your rambling incoherent response, were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul. Duffil lurker Gold Turtle Award Turtle Points: 138 Posts: 4,844 Member since Nov '04 Re: Transfercase output threads damaged « Reply #7 on: Aug 27, 2013, 06:29:47 PM » buy a threadfile. be done with it. Logged