Author Topic: 22r/22re Parts/Performance (Read 7381 times)

zippo · « **on:** Jun 25, 2009, 12:59:41 AM »

All parts came from a 1988 22re with 3k miles on a rebuild. All ran good and are clean. I am swapping in a 3rz so i no longer need them. Shipping will need to be added on"unless pickuped", but remember all prices are negotiable. Pics upon request. Email zippo@oppiz.net ph# 804-304-8599

Location: Gig Harbor, Wa.

1985 EFI tow package ECU - 40 - SOLD
1988 EFI FED ECU - 40
22RE Block, bored/honed .020 over - 50
22RE Crank polished .010 under - 50
22RE Set of rods, ARP studs, new brass pin bushings - 30
Doug Thorley Header, for 4WD pickup. - 100 - SOLD
22RE Head with Oversized Stailess Valves, and "The Cheater" Cam. 220’ duration @ .050 .410 lift. Rpm range 1500-4800 - $100 - SOLD
1988 22RE intake, with fuel rail, cleaned and balanced injecotrs - 75 - SOLD
Bored Big Mouth Throttle body - 50 - SOLD
Marlin Crawler HD Clutch and FlyWheel - 75 - SOLD
Distrubuter/coil - 50
Power Steering pump/resivor - 25
Air Meter box with intake tube - 20 - SOLD
22RE Oil pan and Pickup - 20
Remand Alternator - 20 - SOLD
Valve Cover - 15
Timing chain cover - 15
Any odd eletronics from an 88 just need to ask. Prolly 10 bucks a pop.

Anything else you might need just ask!

colo.toy · « **Reply #1 on:** Jun 25, 2009, 05:46:59 AM »

Which of those ECU's puts out more power?

Shipping for an ECU to 80026?

redsrunner · « **Reply #2 on:** Jun 25, 2009, 09:30:20 AM »

dibs on the doug thorley header and the fuel rail parts and throttle body. how much shipped to 02842? you take paypal? you know if these will fit on my 85 4runner?

4Runtoy · « **Reply #3 on:** Jun 25, 2009, 09:58:45 AM »

Im interested in the header, I have second bids on them ....

also interested in the power steering pump.

84Yota · « **Reply #4 on:** Jun 25, 2009, 06:39:19 PM »

3rd in line for header. Is it a smog legal one?

jimbo74 · « **Reply #5 on:** Jun 25, 2009, 06:42:43 PM »

darnit, where was this hed when i was looking for one?!

kneedownnate · « **Reply #6 on:** Jun 25, 2009, 07:47:15 PM »

Quote from: zippo on Jun 25, 2009, 12:59:41 AM

Marlin Crawler HD Clutch and FlyWheel - 75

Pics of both please? Is it a marlin flywheel too? I'd need to pay with paypal and have it shipped to a business address in 96003.

zippo · « **Reply #7 on:** Jun 25, 2009, 09:34:01 PM »

Quote from: colo.toy on Jun 25, 2009, 05:46:59 AM

Which of those ECU's puts out more power?

Shipping for an ECU to 80026?

UPS Ground 10 Bucks, The tow package has more torque, but both are good...

Quote from: redsrunner on Jun 25, 2009, 09:30:20 AM

dibs on the doug thorley header and the fuel rail parts and throttle body. how much shipped to 02842? you take paypal? you know if these will fit on my 85 4runner?

UPS Ground 25lbs about 35 Bucks, OFCOURSE I TAKE PAYPAL! I know the intake and fuel rail is the same. but the injectors i want to say are different. Im not sure if they will work, but i know they are different. I can include the injector pigtails so you can splice them in if need at no cost.

Quote from: 84Yota on Jun 25, 2009, 06:39:19 PM

3rd in line for header. Is it a smog legal one?

I wanna say it is, not 100% Sure. It has the stuff for the smog crossover pipe though.

Quote from: kneedownnate on Jun 25, 2009, 07:47:15 PM

Pics of both please? Is it a marlin flywheel too? I'd need to pay with paypal and have it shipped to a business address in 96003.

UPS 15 bucks. No prob on the paypal. I will have pics up in the morning

zippo · « **Reply #8 on:** Jun 26, 2009, 06:42:51 AM »

Pics asked for and more!!!

<img src=http://oppiz.net/pics/yota/06262009/Header%201.JPG >
<img src=http://oppiz.net/pics/yota/06262009/Header.JPG >

The throttle was bored to 58mm and has an aluminum plate.

<img src=http://oppiz.net/pics/yota/06262009/Throttle%205.JPG >
<img src=http://oppiz.net/pics/yota/06262009/Throttle%204.JPG >
<img src=http://oppiz.net/pics/yota/06262009/Throttle%201.JPG >

<img src=http://oppiz.net/pics/yota/06262009/85%20ECU.JPG >
<img src=http://oppiz.net/pics/yota/06262009/88%20ECU.JPG >

<img src=http://oppiz.net/pics/yota/06262009/Intake%20Assm%202.JPG >
<img src=http://oppiz.net/pics/yota/06262009/Bottom%20Intake%20Assm.JPG >
<img src=http://oppiz.net/pics/yota/06262009/Fuel%20Rail.JPG >

<img src=http://oppiz.net/pics/yota/06262009/Fly%20Wheel.JPG >
<img src=http://oppiz.net/pics/yota/06262009/Clutch%20Assm%201.JPG >
<img src=http://oppiz.net/pics/yota/06262009/Clutch%20Assm%203.JPG >

<img src=http://oppiz.net/pics/yota/06262009/Head%20Cam.JPG >

<img src=http://oppiz.net/pics/yota/06262009/AFM%201.JPG >
<img src=http://oppiz.net/pics/yota/06262009/AFM%202.JPG >
<img src=http://oppiz.net/pics/yota/06262009/AFM%203.JPG >

kneedownnate · « **Reply #9 on:** Jun 26, 2009, 08:15:18 PM »

I'd like to see a side pic of the clutch disc to see thickness, and assuming it's nice and thick you have yourself a deal

I wish that throttle body would work for the next generation efi! Was it done locally?

David D · « **Reply #10 on:** Jun 26, 2009, 08:45:13 PM »

I could use the following if you have them. Hit me up with a price.
-Driver side bell housing stiffener(bolts to side of block, and tranny)
-A set of bell housing bolts
-Vsv valve for a/s for 22re (little green and black valve on the valve cover)
-driver side water tube that goes to the heater tube
-The 2 hooks to remove the engine with
-The clutch soft line, and mount from down by the starter(basically everything that connects from the hard line, and goes to the slave)
-Throttle cable if it's still in good shape

I may also be interested in the whole intake setup so if I could get a price with that as well that would be great.

zippo · « **Reply #11 on:** Jun 26, 2009, 10:33:46 PM »

Quote from: kneedownnate on Jun 26, 2009, 08:15:18 PM

I'd like to see a side pic of the clutch disc to see thickness, and assuming it's nice and thick you have yourself a deal I wish that throttle body would work for the next generation efi! Was it done locally?

I will post a new pic in teh morning! It's plenty thick. I bought the throttle plate from a guy in Canada and had is CNC Milled locally. Then hand filed it to perfecton.

Quote from: David D on Jun 26, 2009, 08:45:13 PM

I could use the following if you have them. Hit me up with a price.
-Driver side bell housing stiffener(bolts to side of block, and tranny)
-A set of bell housing bolts
-Vsv valve for a/s for 22re (little green and black valve on the valve cover)
-driver side water tube that goes to the heater tube
-The 2 hooks to remove the engine with
-The clutch soft line, and mount from down by the starter(basically everything that connects from the hard line, and goes to the slave)
-Throttle cable if it's still in good shape

I may also be interested in the whole intake setup so if I could get a price with that as well that would be great.

I have it all, but the on the throttle cable had the end split. I have the rest. lets 5 a pop. 10 shipping so 40 for everything shipped. Let me know!

zippo · « **Reply #12 on:** Jun 27, 2009, 06:07:06 AM »

Quote from: kneedownnate on Jun 26, 2009, 08:15:18 PM

I'd like to see a side pic of the clutch disc to see thickness, and assuming it's nice and thick you have yourself a deal I wish that throttle body would work for the next generation efi! Was it done locally?

<img src=http://oppiz.net/pics/yota/06272009/Clutch%20Side.JPG >
<img src=http://oppiz.net/pics/yota/06272009/Clutch.JPG >

More pics of the head upin request.

<img src=http://oppiz.net/pics/yota/06272009/Head%20Bottom%201.JPG >
<img src=http://oppiz.net/pics/yota/06272009/Head%20Bottom.JPG >
<img src=http://oppiz.net/pics/yota/06272009/Head%20Cam.JPG >
<img src=http://oppiz.net/pics/yota/06272009/Head%20Close-up.JPG >
<img src=http://oppiz.net/pics/yota/06272009/Head.JPG >

David D · « **Reply #13 on:** Jun 27, 2009, 07:18:00 PM »

I'll take it hit me up and I will send the money.

kneedownnate · « **Reply #14 on:** Jun 27, 2009, 08:29:50 PM »

Pm me your paypal info whenever you get a chance and I'll send payment for the clutch and flywheel

David D · « **Reply #15 on:** Jun 27, 2009, 09:43:17 PM »

Payment sent thanks man.

jimbo74 · « **Reply #16 on:** Jun 27, 2009, 11:38:34 PM »

pm sent

redsrunner · « **Reply #17 on:** Jun 28, 2009, 06:49:47 AM »

money sent for parts.

42s on u · « **Reply #18 on:** Jun 28, 2009, 09:24:15 AM »

Is the head still available?

zippo · « **Reply #19 on:** Jun 28, 2009, 12:57:01 PM »

Quote from: 42s on u on Jun 28, 2009, 09:24:15 AM

Is the head still available?

Yup, well for the moment atleast!

Matty · « **Reply #20 on:** Jun 28, 2009, 04:32:33 PM »

85flopped · « **Reply #21 on:** Jun 28, 2009, 04:45:35 PM »

is the distributer and coil for an r or re? I am guessing by the fact that everything else is for an re those would be as well. Let me know and pics if posible

toyoder · « **Reply #22 on:** Jun 28, 2009, 05:13:55 PM »

pmed you on the head if its not spoken for i will take it

zippo · « **Reply #23 on:** Jun 28, 2009, 05:39:17 PM »

Quote from: 85flopped on Jun 28, 2009, 04:45:35 PM

is the distributer and coil for an r or re? I am guessing by the fact that everything else is for an re those would be as well. Let me know and pics if posible

Yup it's from an 88 22RE, New cap and router. I will post pics when i get home about 11!

zippo · « **Reply #24 on:** Jun 30, 2009, 05:58:18 AM »

Quote from: 85flopped on Jun 28, 2009, 04:45:35 PM

is the distributer and coil for an r or re? I am guessing by the fact that everything else is for an re those would be as well. Let me know and pics if posible

Sorry it took so long, busy busy.
<img src=http://oppiz.net/pics/yota/06302009/DSCN2857.JPG >
<img src=http://oppiz.net/pics/yota/06302009/DSCN2858.JPG >
<img src=http://oppiz.net/pics/yota/06302009/DSCN2859.JPG >
<img src=http://oppiz.net/pics/yota/06302009/DSCN2860.JPG >
<img src=http://oppiz.net/pics/yota/06302009/DSCN2861.JPG >

zippo · « **Reply #25 on:** Jul 01, 2009, 10:04:55 PM »

Last chance! before the thread drifts into the nothingness of old threads!!!!

David D · « **Reply #26 on:** Jul 06, 2009, 12:40:30 PM »

Received the parts today. Thanks man it was nice doing business with you.

redsrunner · « **Reply #27 on:** Jul 06, 2009, 09:41:59 PM »

recieved my parts today as well. thank you. if you havent recieved payment for the throttle body yet let me know i will take it

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

Related Topics