0 Members and 1 Guest are viewing this topic.
I will be starting of by disassembling the housing for it to get cleaned, any advice on how to remove all the oil and surface rust?I was thinking of just sandblasting the housing which should remove everything (oil/rust) but need to find someone here or I'll be doing it by hand. So if there are any other easy way of doing this it would be great thanks.Oh one more thing what's a good primer for me to spray the housing with after it's all cleaned up.
toyminator2000 – There has to be dumb people in order for there to be smart people
Well I got the axle disassembled and have a problem with separating the rotors from the hub. I removed the two bolts that screw from the back holding the two together but it's still stuck . Do I have to have these pressed out or just pull out the 2 lb hammer.Any help would be great I'll try and get a picture up so you all have a better idea of what I'm talking about.
You need to remove the wheel studs also. You can just put a nut on and smack it with a BFH.
Started by MiniSimp Engine
Started by MiniSimp Project Research and Build-Ups
Started by awhotrods Parts For Sale
Started by 95toyrunner Toyota Pickup/4Runner Tech 1979-95
Started by Isaaccaza « 1 2 » Axle/Differential/Steering