Author Topic: Rancho RS5000 part # 5012 (4 new) (Read 1641 times)

98Taco · « **on:** Jan 25, 2007, 09:28:49 PM »

I have a set of 4 new shocks. 12in travle never used.

Will sell pair for $55 shipped or all for $100 shipped.

wombat · « **Reply #1 on:** Jan 26, 2007, 04:28:00 AM »

How much lift are these recomended for?

Tallchevy · « **Reply #2 on:** Jan 26, 2007, 11:40:03 PM »

These are for a Chevy with a 6" lift, rear. Just make your own mounts.

rockscrambler · « **Reply #3 on:** Jan 26, 2007, 11:45:59 PM »

So would they fit a 87 K5 Blazer

Tallchevy · « **Reply #4 on:** Jan 27, 2007, 08:50:06 AM »

I had the Ranho 9012 on my 79 Blazer with a 6" lift. I don't drive it that much so I took them off & put them on my 4Runner. Had to make my mounts.

rednk1980 · « **Reply #5 on:** Jan 27, 2007, 06:40:12 PM »

just curious if i was to run these on my yota id just have to build some shock hoops correct.

rockscrambler · « **Reply #6 on:** Jan 27, 2007, 10:13:49 PM »

well I will not have the money for 2 weeks if you still have them then I will buy them from you. I looked at my blazer and it has 5000's on it. so I can use them as spares if I blow one.

Tallchevy · « **Reply #7 on:** Jan 27, 2007, 10:21:10 PM »

Yeah rednk1980, you could use these. Check out the mounts I made in the rig gallery.

Author Topic: Rancho RS5000 part # 5012 (4 new) (Read 1641 times)

98Taco

Rancho RS5000 part # 5012 (4 new)

wombat

Re: Rancho RS5000 part # 5012 (4 new)

Tallchevy

Re: Rancho RS5000 part # 5012 (4 new)

rockscrambler

Re: Rancho RS5000 part # 5012 (4 new)

Tallchevy

Re: Rancho RS5000 part # 5012 (4 new)

rednk1980

Re: Rancho RS5000 part # 5012 (4 new)

rockscrambler

Re: Rancho RS5000 part # 5012 (4 new)

Tallchevy

Re: Rancho RS5000 part # 5012 (4 new)

Related Topics


	Author Topic: Rancho RS5000 part # 5012 (4 new) (Read 1641 times) 0 Members and 1 Guest are viewing this topic. 98Taco Trade Count: (0) Rock Crawl'n Turtle Points: 0 Posts: 81 Member since Aug '02 Rancho RS5000 part # 5012 (4 new) « on: Jan 25, 2007, 09:28:49 PM » I have a set of 4 new shocks. 12in travle never used. Will sell pair for $55 shipped or all for $100 shipped. Report to moderator Logged 93 ExCab with lots of bling.. wombat Trade Count: (0) Rock Crawl'n Turtle Points: -2 Posts: 51 Member since Jan '07 Re: Rancho RS5000 part # 5012 (4 new) « Reply #1 on: Jan 26, 2007, 04:28:00 AM » How much lift are these recomended for? Report to moderator Logged Tallchevy Trade Count: (0) Silver Turtle Award Turtle Points: 236 Posts: 3,562 Member since Dec '06 Where were going we don't need roads! Re: Rancho RS5000 part # 5012 (4 new) « Reply #2 on: Jan 26, 2007, 11:40:03 PM » These are for a Chevy with a 6" lift, rear. Just make your own mounts. Report to moderator Logged My child is an honor student at Anton Levay's School of Satanic Arts 87 4Runner redo http://board.marlincrawler.com/index.php?topic=41959.0 87 Toyota 4Runner, SAS Rig Gallery http://board.marlincrawler.com/index.php?topic=29877.msg3 rockscrambler Trade Count: (0) 4WD Legend Turtle Points: 0 Posts: 800 Member since May '05 the rocscrambler's rock blazer Re: Rancho RS5000 part # 5012 (4 new) « Reply #3 on: Jan 26, 2007, 11:45:59 PM » So would they fit a 87 K5 Blazer Report to moderator Logged we're born,we roll over,we crawl,we walk,we run,we drive,we install cages,we wheel,we crawl,we roll over,the circle of life is complete.! "we sleep peaceably in our beds because rough men stand ready in the night to bring violence upon those who would do us harm" to you I say thank you 87 Chevy K5 V10 tonka truck,87 Toyota 4runner 83 Jeep CJ8,sold-76 Dodge W200 & 87 Ford broncoII Tallchevy Trade Count: (0) Silver Turtle Award Turtle Points: 236 Posts: 3,562 Member since Dec '06 Where were going we don't need roads! Re: Rancho RS5000 part # 5012 (4 new) « Reply #4 on: Jan 27, 2007, 08:50:06 AM » I had the Ranho 9012 on my 79 Blazer with a 6" lift. I don't drive it that much so I took them off & put them on my 4Runner. Had to make my mounts. Report to moderator Logged My child is an honor student at Anton Levay's School of Satanic Arts 87 4Runner redo http://board.marlincrawler.com/index.php?topic=41959.0 87 Toyota 4Runner, SAS Rig Gallery http://board.marlincrawler.com/index.php?topic=29877.msg3 rednk1980 Trade Count: (0) The 1K Club Turtle Points: 1 Posts: 1,295 Member since Mar '06 Pull Your Panties to the side! Re: Rancho RS5000 part # 5012 (4 new) « Reply #5 on: Jan 27, 2007, 06:40:12 PM » just curious if i was to run these on my yota id just have to build some shock hoops correct. Report to moderator Logged HOLD ON TIGHT! 1983 Toyota SR5 long box bobbed 17" doved 14" bed cage, 22re, w56 tranny, working on dual cases 23 spline 4.70 twin sticks driveline disco. Dana 44 front, Dana 60 rear disk brakes and ff. rockscrambler Trade Count: (0) 4WD Legend Turtle Points: 0 Posts: 800 Member since May '05 the rocscrambler's rock blazer Re: Rancho RS5000 part # 5012 (4 new) « Reply #6 on: Jan 27, 2007, 10:13:49 PM » well I will not have the money for 2 weeks if you still have them then I will buy them from you. I looked at my blazer and it has 5000's on it. so I can use them as spares if I blow one. Report to moderator Logged we're born,we roll over,we crawl,we walk,we run,we drive,we install cages,we wheel,we crawl,we roll over,the circle of life is complete.! "we sleep peaceably in our beds because rough men stand ready in the night to bring violence upon those who would do us harm" to you I say thank you 87 Chevy K5 V10 tonka truck,87 Toyota 4runner 83 Jeep CJ8,sold-76 Dodge W200 & 87 Ford broncoII Tallchevy Trade Count: (0) Silver Turtle Award Turtle Points: 236 Posts: 3,562 Member since Dec '06 Where were going we don't need roads! Re: Rancho RS5000 part # 5012 (4 new) « Reply #7 on: Jan 27, 2007, 10:21:10 PM » Yeah rednk1980, you could use these. Check out the mounts I made in the rig gallery. Report to moderator Logged My child is an honor student at Anton Levay's School of Satanic Arts 87 4Runner redo http://board.marlincrawler.com/index.php?topic=41959.0 87 Toyota 4Runner, SAS Rig Gallery http://board.marlincrawler.com/index.php?topic=29877.msg3