Author Topic: Parts needed to complete 5 speed swap (Read 1682 times)

olemisstoy88 · « **on:** Jan 11, 2006, 05:22:45 PM »

1. clutch/ brakes pedal.
2. slave cylinder
3. shifter and all linkages.
thanks

79coyotefrg · « **Reply #1 on:** Jan 11, 2006, 05:44:11 PM »

Quote from: olemisstoy88 on Jan 11, 2006, 05:22:45 PM

1. clutch/ brakes pedal.
2. slave cylinder
3. shifter and all linkages.
thanks

so you need a clutch and brake assembly ?? and the shifter for what kind of tranny??

and you can buy the slave cyl new, but i can probably find one

kneedownnate · « **Reply #2 on:** Jan 11, 2006, 06:01:57 PM »

Ditto, the slaves are cheap new.

yotaweelr · « **Reply #3 on:** Jan 11, 2006, 07:38:53 PM »

where ya located I have everything out of 85 minus shifters. clutch peddle assymbly with brake peddle and slave. do you need the clutch master too.

jimbo74 · « **Reply #4 on:** Jan 14, 2006, 07:01:05 PM »

the clutch slave cylinder is like $30 from kragens and so is the clutch master cylinder

toyotaguy55 · « **Reply #5 on:** Jan 14, 2006, 07:38:18 PM »

i got the pedals

Author Topic: Parts needed to complete 5 speed swap (Read 1682 times)

olemisstoy88

Parts needed to complete 5 speed swap

79coyotefrg

Re: Parts needed to complete 5 speed swap

kneedownnate

Re: Parts needed to complete 5 speed swap

yotaweelr

Re: Parts needed to complete 5 speed swap

jimbo74

Re: Parts needed to complete 5 speed swap

toyotaguy55

Re: Parts needed to complete 5 speed swap

Related Topics


	Author Topic: Parts needed to complete 5 speed swap (Read 1682 times) 0 Members and 1 Guest are viewing this topic. olemisstoy88 Trade Count: (0) Crawler Guru Turtle Points: -381 Posts: 521 Member since Dec '05 Parts needed to complete 5 speed swap « on: Jan 11, 2006, 05:22:45 PM » 1. clutch/ brakes pedal. 2. slave cylinder 3. shifter and all linkages. thanks Report to moderator Logged 88. 4x2 Total chaos 6.5" caddy uniball kit Racerunner 2.5 x 14" coilovers on front, 62" deavers, fabbed engine/shock cage, bed cage, roll cage and great frame, complete int., (5) 5x4.5 outlaw II w/235 buckshots <----- parting out! make offer '84 4x4 . 5 speed 22r 3.5" lift 33x10.5s bfg MTs Hannamann Glass frontcap, 32/36weber, LCE swirlie plate, Magnaflow, "Im madder than Toby Keith at a Dixie Chicks concert" 79coyotefrg Trade Count: (0) Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Parts needed to complete 5 speed swap « Reply #1 on: Jan 11, 2006, 05:44:11 PM » Quote from: olemisstoy88 on Jan 11, 2006, 05:22:45 PM 1. clutch/ brakes pedal. 2. slave cylinder 3. shifter and all linkages. thanks so you need a clutch and brake assembly ?? and the shifter for what kind of tranny?? and you can buy the slave cyl new, but i can probably find one Report to moderator Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way kneedownnate Trade Count: (+1) Gold Turtle Award Turtle Points: 1128 Posts: 9,757 Member since Oct '04 Re: Parts needed to complete 5 speed swap « Reply #2 on: Jan 11, 2006, 06:01:57 PM » Ditto, the slaves are cheap new. Report to moderator Logged RIP KYOTA You can go through life being scared of the possible, or you can have a little fun and tease the inevitable. Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life! yotaweelr Trade Count: (0) Rock Master Turtle Points: -53 Posts: 208 Member since Feb '05 wheelin Re: Parts needed to complete 5 speed swap « Reply #3 on: Jan 11, 2006, 07:38:53 PM » where ya located I have everything out of 85 minus shifters. clutch peddle assymbly with brake peddle and slave. do you need the clutch master too. Report to moderator Logged jimbo74 Trade Count: (0) Gold Turtle Award Turtle Points: 2872 Posts: 8,707 Member since Sep '05 Re: Parts needed to complete 5 speed swap « Reply #4 on: Jan 14, 2006, 07:01:05 PM » the clutch slave cylinder is like $30 from kragens and so is the clutch master cylinder Report to moderator Logged The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission. ~ John F. Kennedy ~ toyotaguy55 Trade Count: (0) Dusty Trails Turtle Points: -44 Posts: 9 Member since Jan '06 Crawling with Marlin Re: Parts needed to complete 5 speed swap « Reply #5 on: Jan 14, 2006, 07:38:18 PM » i got the pedals Report to moderator Logged " if i wanted a hummer, ill call you sister"