Author Topic: FS: Caddy calipers & air comps. (Read 4378 times)

5spd · « **on:** Dec 16, 2002, 02:06:07 PM »

The usual caddy calipers for your rear disk swap...off 91 caddies...pads included...will have 3 sets by jan 1st.....$60 ea set, no brackets/ ebrake cables
Will also have 3-4 caddy air compressors, mid 90s also...these work great for arbs and what not....$45 ea.
IM me or post here.

tonka · « **Reply #1 on:** Dec 16, 2002, 05:18:00 PM »

Do you have rotors?

5spd · « **Reply #2 on:** Dec 17, 2002, 02:08:34 PM »

I can get the caddy rotors also if thats the rotor ya want...all the chevy rotors are gone that people use with these...I dont have a price on the rotors though since no-one has asked for em with the calipers. I also do not get the mount plate since those are custom to each swap...just in the pic for info...(but I can)

tonka · « **Reply #3 on:** Dec 17, 2002, 02:25:41 PM »

will the mounting plates work on a 14 bolt axle? The way the backing plates looks in the pic. like it would. what size are the rotors

J.D.Zuki · « **Reply #4 on:** Dec 18, 2002, 04:07:23 PM »

is that 75 per side or for the set?

5spd · « **Reply #5 on:** Dec 22, 2002, 02:01:39 PM »

$75 per set...
I do not know if the backing plates will work on a 14 bolt, no one has wanted the backing plates so far since they have been going on d60s, d44s or toy rear ends...
I do not know the rotor dia off the caddy , I will get the dia next time I got out there...

tonka · « **Reply #6 on:** Jan 03, 2003, 05:11:39 PM »

what lug patern is the rotor

booger_weldz · « **Reply #7 on:** Jan 08, 2003, 04:48:50 AM »

did you get the goodies yet??

5spd · « **Reply #8 on:** Jan 08, 2003, 01:27:30 PM »

BW....I have not got em yet...concentrating on my tranny problem, but I have not forgotten...I hope to have a backup tranny here sat and swapped done sunday then the following sunday to get the parts...
I "might"...just "might" give you the air comp for a new daddys present....."maybe"........... :oops:

Tonka....the rotors are 5 lug...do not know measurements though, I do not get em since all the guys who buy these use different rotors and just want the calipers....

booger_weldz · « **Reply #9 on:** Jan 10, 2003, 11:14:16 AM »

Quote

BW....I have not got em yet...concentrating on my tranny problem, but I have not forgotten...I hope to have a backup tranny here sat and swapped done sunday then the following sunday to get the parts...
I "might"...just "might" give you the air comp for a new daddys present....."maybe"........... :oops:

tonka · « **Reply #10 on:** Jan 10, 2003, 05:08:47 PM »

I want just the calipers for know.thanks

5spd · « **Reply #11 on:** Jan 11, 2003, 01:22:02 PM »

ok I should be getting these sunday 2 sets calipers and 2-3 air comps...just so you all know.....UNLESS it is raining.........then will go on day off or nest sunday the 18th..........

5spd · « **Reply #12 on:** Jan 16, 2003, 11:20:21 AM »

Ok I have 2 sets ready......calipers only....no brackets, lines ect.....

Paul I have your caddy air comp. here for ya......

booger_weldz · « **Reply #13 on:** Jan 17, 2003, 02:37:35 AM »

hey jim, im coming up to get a tranny and Tcase for my brothers jeep from sillyneck, can you PM me your #?

thanks :up:

tonka · « **Reply #14 on:** Jan 17, 2003, 04:52:53 PM »

send me your number I will be going that way for some doors

5spd · « **Reply #15 on:** Jan 18, 2003, 02:58:12 PM »

Here is a pic of how they are...as you see em, nothing else included....one will need a new rubber piston seal, but if you rebuild them then it will not matter...new price...$60 plus shipping....since I do not have the ebrake lines that I usually get....

Brandon · « **Reply #16 on:** Jan 19, 2003, 01:02:28 AM »

Quote

what lug patern is the rotor

not 6, but you can redrill em..

u can't see the redrilled holes but they are redrilled caddy rotors

Brandon · « **Reply #17 on:** Jan 19, 2003, 01:03:56 AM »

I take that back, I think mine are from an ElDorado

(they don't look the same)

booger_weldz · « **Reply #18 on:** Jan 19, 2003, 05:47:46 AM »

if someone is buying any of these items i can bring them down with me to the sacramento area or nearby when i go visit jim in chico...

5spd · « **Reply #19 on:** Jan 19, 2003, 03:35:51 PM »

Two sets left....picked up another 1 today...

5spd · « **Reply #20 on:** Feb 21, 2003, 03:59:37 PM »

1 set left as of today...

5spd [OP]

5spd [OP]

5spd [OP]

5spd [OP]

5spd [OP]

5spd [OP]

5spd [OP]

5spd [OP]

Related Topics