Topic: Message #985324

[jtaco1]

Got some more done Sunday morning.  Where I placed my C-pillar on the inner fenders there was a bump that located the stock roll bar that made it a PITA to have a level area for a foot plate.  Little bit of work with the plasma and some plating and I had a flat area to work with.  I had Kris at After Midnight Fabrication locally cut me some nice foot plates.  Got those bolted in and bent up the C-pillar and welded it out.  Rolled it out of the shop to get a beter look at what I had - if the cage looks lopsided, don't worry it is not, I parked on a hill and suck at taking pictures




All that is left is to tie the rear portion of the cage into the frame, install a few gussets at the C-pillar like I have on the B-pillar, C-pillar and C-pillar to D-pillar braces, and a flip up storage/gear rack once some of the parts come in from RuffStuff.