« on: Sep 23, 2004, 08:52:20 AM »
what i noticed was no nyloc nut no lockwasher no flatwashers eather and the bolt was in from the bottom. in that configuration if the nut came off the bolt will fall out. also put flatwashers on the top and bottom along with locks or nylocks. that way if the center came out of the hime joint the bolt wont come thru the hole and u could still get back home.if the flats hit the hime at full flex make a small spacer to go on each side.
![Bolt! :bolt:](https://board.marlincrawler.com/Smileys/marlin/bolt.gif)
![](https://board.marlincrawler.com/Themes/MCI_V3C/images/ip.gif)
Logged
1983 TOY SHORT PICKUP .35/12.50S EXO CAGE HOMEMADE BED CAMO PAINT, REARS UP FRONT CHEVYS IN THE REAR, 4 WHEEL DISK, CABLE LOCKER REAR, LOCK RITE FRONT, 5.29GEARS FRONT & REAR.BOBBY LONG 30 SPLINES 9500 lb WARN WINCH. DUAL
T CASES WITH 4.7 IN THE REAR. THANKS MARLIN