Author Topic: Money bucket ZUK (Read 32340 times)

TEXCRAWLER · « **on:** Jul 19, 2009, 07:53:11 AM »

http://www.zukikrawlers.com/showthread.php?t=12432

I got my 39's today. 39x15x15 TSL Super Swampers

4 linkin F&R. Coils F&R. Gona be bad ass. I'm using a Tacoma rear axle cause it has 4" more width than the Toy 89 IFS axle I have now. I have enough jony joints to get the rear done and all my brackets and still waiting on alot of parts.

Toy 8" 3rd on the left and the Tacoma 3rd on the right. They look just about the same in size but there is a inch difference and no parts are interchangeable. I'm still gona be doing 5.29's R&P but gona be spooled F&R.

Here she is back on the chopping block again. I'd say a month at the most and I'll have my suspension complete and ready for a test run.

Got my coils and coil hangers. I have alot more coming from Sky Manufacturing

TEXCRAWLER · « **Reply #1 on:** Jul 19, 2009, 07:54:15 AM »

I now have the DOM tubing and ready to make my links

Out rigger and hiem hangers built ready to weld on.

More goodies such as shock hoops, disk brake kit, and the conversion kit to use Toy IFS hub bodies and locks on my 85 toy axle

Ready to plate the frame and weld on the coil hangers

TEXCRAWLER · « **Reply #2 on:** Jul 19, 2009, 07:56:03 AM »

Got a bit of work done on the rig. D-line built.

OK boys & girls I've been holding out on yall. I'm putting a Dimond front axle in the front. Built out of 3/8" steel.

I have my pinion angle set now and I can weld the rest of my hangers on. Coils are in and gona set my coils on the axle after I get my links built to center my axle.

Lower links are built

TEXCRAWLER · « **Reply #3 on:** Jul 19, 2009, 07:57:40 AM »

This is the fuel cell that I bought from Simmit racing.

Built my new fromt hanger for my winch, P/S box and coil mounts

Sidekick P/S box taped for hydro assist. I went w/the kick box cuase it mounts up high inside the frame sence it will be so far out in front.

PSC P/S pump

TEXCRAWLER · « **Reply #4 on:** Jul 19, 2009, 07:59:01 AM »

I'm mostly finished but got alot of cosmedic work to do.

Front hanger Gona have a 100% aproch angle F&R

Ho does this look to yall

Getting ready to tube the rear

This is where the box mounts inside the the hole I cut in the front hanger

links 115" Wheelbase

Upper links built for the diamond from Hendrix Motor sports

Got somethin in the works from Desert Runner yall really gona like

toyotanner · « **Reply #5 on:** Jul 19, 2009, 11:55:31 AM »

is there a reason your going coils? or do you just not have the money for airshocks/ coilovers?

TEXCRAWLER · « **Reply #6 on:** Jul 19, 2009, 12:42:05 PM »

I wanted coils in the 1st place and yes they are less expensive. Don't see to many broken coils but have seen a few broken airshocks and seen them lose the pressure out on the trail.

thegoofster21 · « **Reply #7 on:** Jul 19, 2009, 01:01:53 PM »

your sami is so nice. i hope to get mine done soon

TEXCRAWLER · « **Reply #8 on:** Jul 19, 2009, 02:28:34 PM »

THANX

Slolyfe · « **Reply #9 on:** Jul 19, 2009, 05:42:24 PM »

Looks awesome! I love the axles.

Not trying to tell you how to operate but be careful with those concrete blocks holding your rig up! Ive had one explode on me and dropped a tcase and tranny. Luckily I had them ratchet strapped also so they only moved afew inches.

85yotabox · « **Reply #10 on:** Jul 20, 2009, 09:05:04 PM »

lookin good man, cant wait to see this thing roaming the streets of Napa again.

TEXCRAWLER · « **Reply #11 on:** Jul 21, 2009, 05:59:08 PM »

Quote from: 85yotabox on Jul 20, 2009, 09:05:04 PM

lookin good man, cant wait to see this thing roaming the streets of Napa again.

Don't no how much street drivin this thing will have anymore. Between my zul and my truck the cops no who I am now!! LOL Tell them to sit on this

and rotate!!

TEXCRAWLER · « **Reply #12 on:** Jul 23, 2009, 08:08:07 PM »

Here is the front tube clip I had Jack at Desert Runner Fab fab and bend up for me. I'll get it put on this weekend.

Getting my rear axles ready for my disk brakes

This is the bracket I got from Skymanurfacturing for the disk brake convertion.

rockwalker · « **Reply #13 on:** Jul 29, 2009, 10:16:34 PM »

i should be getting my diamond this friday i hope its been a long time. what width are you?

TEXCRAWLER · « **Reply #14 on:** Jul 30, 2009, 04:16:58 PM »

Quote from: rockwalker on Jul 29, 2009, 10:16:34 PM

i should be getting my diamond this friday i hope its been a long time. what width are you?

You can't go wrong w/the diamond axle.
Stock Toy width w/the sky IFS Hub convertion and the 39's it is 66"

luvyota · « **Reply #15 on:** Jul 30, 2009, 05:50:28 PM »

looks good its alot better than my buddys sami

twistedtoy92 · « **Reply #16 on:** Jul 30, 2009, 06:53:43 PM »

damn nice build $Beer Chug\'n$ I'll be watchin this one....

TEXCRAWLER · « **Reply #17 on:** Aug 03, 2009, 10:38:53 AM »

Front end is complete and still workin on the front tube clip. Gone do it 2 night.

Rear is complete

I like the way HACK did his front 4 link so I monted my upper link brackets on the outside of the frame.

I aslo bought the rear tube cap from Trail Tough

twistedtoy92 · « **Reply #18 on:** Aug 03, 2009, 07:47:09 PM »

Lookin real nice

thegoofster21 · « **Reply #19 on:** Aug 03, 2009, 09:37:46 PM »

i love how it looks

Jud · « **Reply #20 on:** Aug 04, 2009, 01:15:42 PM »

Damn I soo want to build a sammi just like that! Looks badass!!!!!!

TEXCRAWLER · « **Reply #21 on:** Aug 05, 2009, 06:01:27 AM »

I may have run into a problem w/the steering box and might have to go full hydro

TEXCRAWLER · « **Reply #22 on:** Aug 07, 2009, 09:49:06 PM »

Sky- manufacturing IFS hub conversion kit. Also 1-1/2" wider

Pulled her out of the grage and maxed out mt 60" hi lift w/alot more to go

Workin on puttin that front tube clip together

thegoofster21 · « **Reply #23 on:** Aug 08, 2009, 11:37:19 AM »

aww its so cute haha

TEXCRAWLER · « **Reply #24 on:** Aug 08, 2009, 05:50:43 PM »

Quote from: thegoofster21 on Aug 08, 2009, 11:37:19 AM

aww its so cute haha

Yeh I can't get it out of the grage with the 39's on it.

thegoofster21 · « **Reply #25 on:** Aug 09, 2009, 10:16:42 AM »

ya i had 26" tires on mine for a little on its got 31" and looks a little better

luvyota · « **Reply #26 on:** Aug 11, 2009, 09:48:54 AM »

that looks sweet man

do you know how much total travel you have?

thegoofster21 · « **Reply #27 on:** Aug 12, 2009, 08:25:38 PM »

Quote from: TEXCRAWLER on Aug 05, 2009, 06:01:27 AM

I may have run into a problem w/the steering box and might have to go full hydro

oh darn haha

TEXCRAWLER · « **Reply #28 on:** Aug 14, 2009, 07:28:40 AM »

Quote from: luvyota on Aug 11, 2009, 09:48:54 AM

that looks sweet man do you know how much total travel you have?

Not yet but will let you know soon and I get some pics of it with the meats on it. I now have all my hydro set up. I'm just shy $1000 into it. I'll have pics soon

TEXCRAWLER · « **Reply #29 on:** Aug 18, 2009, 07:38:28 PM »

My full hydro setup from Trail Gear

Disk brake set up for the rear. I bought the bracket from Sky Manufacturing and the calipers & rotors are Cadilac Eldorado fronts

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

TEXCRAWLER [OP]

Related Topics