Author Topic: For Sale - Another build by zippo  (Read 3713 times)

0 Members and 1 Guest are viewing this topic.

zippo

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
For Sale - Another build by zippo
« on: May 05, 2018, 02:23:50 AM »
So I started another project and seeing how I sell everything anyway, I figured I can just have an ongoing ad! 

SOLD! First Build - Rotten-Lime
SOLD! Second Build - Willy Wonka
SOLD! Third Build - No Name

So to start the project, I rebuilt an R151 transmission as well as a RF1A transfer case doubler with 4.7's in the rear.

R151 has upgraded thrust washer, bearing retainer and marlin shift forks.
RF1A has Marlin chromoly everything with 4.7's in the rear.

The T-case build with lots of pics is here: T-Case Doubler Build

I also made a nifty seal driver for the R-series front seal. If I had a bigger chunk of aluminum I would have made it index off the bearing retaining lip to set the depth. Oh well, it still worked like a champ! Seal Driver

Not a lot of pics to the R151 transmission. Overall it turned out well, other then some of the gears having a little surface rust on them. I don't think it will hurt anything. I cleaned them up, no pitting, just some discoloration.

















So overall the goal is to build a bunch of parts and then buy a rig and thrash on it. Thinking 60 front, 14 bolt rear, first gen? turbo propane? Sounds like a headline I could get a lot of interest with on craigslist when i'm ready to dump it. 

« Last Edit: Jun 07, 2018, 01:15:24 PM by zippo »
If you see it, its for sale.

helipilot77

  • Offline The 1K Club
  • *
  • Turtle Points: 976
  • Male Posts: 1,469
  • Member since Jul '12
  • Seattle, WA
    • My build thread
Re: For Sale - Another build by zippo
« Reply #1 on: May 05, 2018, 07:21:04 AM »
The first step in recovery is admitting you have a problem.  :yupyup:
-1987 SR5 4runner, 1KZ-te turbo diesel with custom 3" S.S. dump pipe, R-151f transmission, marlin dual ultimate transfer cases w/ triple shifter, SAS, 35's
-1984 SR5 Tercel 4wd wagon bone stock - given to my nephew
-1:10 scale RC 4wd crawler w/yota axles, R2 2 speed enclosed dig tranny and 1st gen 4Runner body by BigBird
-My build thread http://board.marlincrawler.com/index.php?topic=98969.0
-My front axle service write-up http://board.marlincrawler.com/index.php?topic=97311.0[/ur

liveoak

  • Offline Crawler Guru
  • ****
  • Turtle Points: 115
  • Posts: 640
  • Member since Mar '08
Re: For Sale - Another build by zippo
« Reply #2 on: May 05, 2018, 09:16:34 AM »
How much do you want for it?
my 3rz swap. http://board.marlincrawler.com/index.php?topic=97722.0

Let me start off with a basket of chips

Capra

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 468
  • Posts: 52
  • Member since Jun '16
Re: For Sale - Another build by zippo
« Reply #3 on: May 05, 2018, 03:50:15 PM »
Oh boy!

redneckcustoms13

  • Online The 2K Group
  • ***
  • Turtle Points: 6142
  • Male Posts: 2,271
  • Member since May '15
    • Buy me a beer
Re: For Sale - Another build by zippo
« Reply #4 on: May 05, 2018, 07:38:24 PM »
You could send it to me for my turbo propane 3rz.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

:)bestgen4runner

  • Online The 1K Club
  • *
  • Turtle Points: 2184
  • Male Posts: 1,496
  • Member since Mar '16
  • Crawling with Marlin
Re: For Sale - Another build by zippo
« Reply #5 on: May 05, 2018, 08:24:08 PM »
Dibs when he starts selling things
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #6 on: May 09, 2018, 04:07:43 PM »
So Dana 60 front and 14 Bolt rear have been ordered and are on a slow boat from Alaska! Got a good deal on them!
If you see it, its for sale.

Dingman.

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 619
  • Male Posts: 3,409
  • Member since Oct '08
Re: For Sale - Another build by zippo
« Reply #7 on: May 10, 2018, 11:28:16 AM »
:eye:

chim

  • Offline The 1K Club
  • *
  • Turtle Points: 976
  • Male Posts: 1,257
  • Member since Apr '05
  • www.prisonplanet.com
Re: For Sale - Another build by zippo
« Reply #8 on: May 10, 2018, 01:09:41 PM »
 :eye: :eye:

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -442
  • Male Posts: 4,824
  • Member since Jun '07
  • Jeepin North Idaho
    • Buy me a drink
Re: For Sale - Another build by zippo
« Reply #9 on: May 10, 2018, 02:05:18 PM »
:popcorn: Heck ya Zippo!
1996 Jeep ZJ Laredo Daily/Weekend Wheeler
5.2L V8, 44RE, NP249, 33X12.50R15s on MT Classics, 5.5in Iron Rock Off Road Critical Path F/R

Trailer Build http://board.marlincrawler.com/index.php?topic=103261

2005 Dodge Durango Limited 5.7L Hemi Wife's Daily

Instagram @ taytershubby13

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #10 on: May 20, 2018, 12:11:05 AM »
So my Alaska thing fell through. He called, said there was some issues with the stuff and that ended that. Not to be slowed down, I went junkyarding and scored a 14bolt for $175. This is my first 14bolt and they are beef! This came out a 77 Chevy 1 Ton. I got a line on a 60. Time will tell.







If you see it, its for sale.

300k

  • Online Crawler Guru
  • ****
  • Turtle Points: 3513
  • Male Posts: 535
  • Member since Jun '15
  • Working on my truck with Marlin
Re: For Sale - Another build by zippo
« Reply #11 on: May 20, 2018, 12:48:04 PM »
must be a place holder until you can get some 8 inch Toyota axles :gap:
Keep it TOYOTA!

In the past years, I used to get a lot of calls from Jeep owners wanting to go slow like the Toy trucks.

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #12 on: May 20, 2018, 01:10:55 PM »
must be a place holder until you can get some 8 inch Toyota axles :gap:

Having now had my hands on both. There is no comparing the two. The 14bolt is just crazy beefy.
If you see it, its for sale.

Rockcrawlintoy

  • 4 doors for more whores
  • Offline The 2K Group
  • ***
  • Turtle Points: 1903
  • Male Posts: 2,145
  • Member since Dec '03
  • RIP Kyle
    • Buy me a soda
Re: For Sale - Another build by zippo
« Reply #13 on: May 20, 2018, 01:16:53 PM »
You should make an axle cart for the axle
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

redneckcustoms13

  • Online The 2K Group
  • ***
  • Turtle Points: 6142
  • Male Posts: 2,271
  • Member since May '15
    • Buy me a beer
Re: For Sale - Another build by zippo
« Reply #14 on: May 20, 2018, 03:58:45 PM »
What gear are you going with?
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #15 on: May 21, 2018, 12:14:27 AM »
So I got the 14bolt pulled apart, blasted and painted today. It will need some more work, but now its clean and easier to work with.

It was all the old Harbor Freight pumpkin blaster had in her. It sucks blasting stuff. It took over 300lbs of sand....



All nice and clean. I took the old 800lb breaks and carrier to the dump.

If you see it, its for sale.

Ritchie

  • Offline Rock Master
  • ***
  • Turtle Points: 460
  • Male Posts: 187
  • Member since May '13
  • Ritchie
Re: For Sale - Another build by zippo
« Reply #16 on: May 21, 2018, 02:15:47 PM »
Nice work... you gonna shave it too?
'02 Prerunner, ARB F/R w/5.29's, 4WU 3 link, Diamonds F/R, Fox shocks F/R, Shrockworks front bumper, self made rear bumper, WARN M8000S, Inchworm Lefty, Deaver 8 pack, self made sliders that hold air & a bunch of other stuff.

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #17 on: May 21, 2018, 02:26:14 PM »
Nice work... you gonna shave it too?

What kind of person do you take me for? Of course I'm going to shave it. That way I can get top dollar for it when I sell it.
« Last Edit: May 21, 2018, 04:28:32 PM by zippo »
If you see it, its for sale.

FRANKENYOTA91

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 108
  • Male Posts: 64
  • Member since Mar '08
Re: For Sale - Another build by zippo
« Reply #18 on: May 22, 2018, 06:22:28 AM »
Where is that junkyard? Looks like it can be a dangerous place for me  :ha_ha:
85 toy double extended cab pos wheeler bobby longs, welded front and rear, dual cases
89 4runner sas,  duals, the usual
81 toyota long box project
83 short box project
2001 Cummins 6 speed tow rig

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #19 on: May 22, 2018, 07:06:47 AM »
Where is that junkyard? Looks like it can be a dangerous place for me  :ha_ha:

http://www.yankapart.net

Not a lot of Toyotas, but a ton of square body Chevy stuff and Ford trucks.
If you see it, its for sale.

THK Matt

  • 96ZJ v8
  • Offline Gold Turtle Award
  • *
  • Turtle Points: -442
  • Male Posts: 4,824
  • Member since Jun '07
  • Jeepin North Idaho
    • Buy me a drink
Re: For Sale - Another build by zippo
« Reply #20 on: May 22, 2018, 10:26:19 AM »
http://www.yankapart.net

Not a lot of Toyotas, but a ton of square body Chevy stuff and Ford trucks.

i like how theres a toyota camry on there webpage :rofl:

man we need more eye candy Zippo

:worthless:

...ya know, whenever you get a chance
1996 Jeep ZJ Laredo Daily/Weekend Wheeler
5.2L V8, 44RE, NP249, 33X12.50R15s on MT Classics, 5.5in Iron Rock Off Road Critical Path F/R

Trailer Build http://board.marlincrawler.com/index.php?topic=103261

2005 Dodge Durango Limited 5.7L Hemi Wife's Daily

Instagram @ taytershubby13

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #21 on: May 22, 2018, 12:43:26 PM »
i like how theres a toyota camry on there webpage :rofl:

man we need more eye candy Zippo

:worthless:

...ya know, whenever you get a chance

I post all the pics I have!

So another 1000 phone calls later found another good deal on a Dana 60 front. Shipped in from Minnesota. Its a drw 60 so I will have to turn the hubs down on the lathe.

I will take plenty of pics.
If you see it, its for sale.

FRANKENYOTA91

  • Offline Rock Crawl'n
  • **
  • Turtle Points: 108
  • Male Posts: 64
  • Member since Mar '08
Re: For Sale - Another build by zippo
« Reply #22 on: May 25, 2018, 04:35:31 PM »
http://www.yankapart.net

Not a lot of Toyotas, but a ton of square body Chevy stuff and Ford trucks.

I've got a small collection of square body's, so I'm might be making a trip  over there.
85 toy double extended cab pos wheeler bobby longs, welded front and rear, dual cases
89 4runner sas,  duals, the usual
81 toyota long box project
83 short box project
2001 Cummins 6 speed tow rig

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #23 on: Jun 04, 2018, 10:01:58 PM »
SOOOOOO. I think I sold the Trans and T-case! Sweet.

Also I got a package! GM Dana 60!



I got it home and started pulling it apart. This stuff is so much heavier and beef then Toyota stuff. The housing is in good shape. Just dirty as.









35 spline inners - Will upgrade to 35 spline outers.







The gear set in this thing was crispy.





Housing is in good shape!









I looked it up in the Dana 60 Bible.



Lots to clean and prep. A lot of this wont be used. Really just the housing and spindles.
« Last Edit: Jun 05, 2018, 06:09:20 AM by zippo »
If you see it, its for sale.

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #24 on: Jun 05, 2018, 10:29:37 PM »
Ah. Shop cleaned. Much better









Got the Ruff Stuff disk brake kit, test fit.



The king pin uses a 7/8 hex. I bought a 7/8 hex as well as a 3/4 drive 7/8's socket, cut a chunk of hex off. This will allow me to remove and install new king pins. 550ft lbs!


If you see it, its for sale.

redneckcustoms13

  • Online The 2K Group
  • ***
  • Turtle Points: 6142
  • Male Posts: 2,271
  • Member since May '15
    • Buy me a beer
Re: For Sale - Another build by zippo
« Reply #25 on: Jun 06, 2018, 05:25:27 AM »
Highly recomend barnes high steer arms. I love them.
80 short bed, longs, hi steer, 4.7 case twin stick, 4.11, 38 tsl, mild built 22r
83 long bed, sas, hi steer, 3rz, w56, 4.56 33s
95 4runner project
06 4 door tacoma street truck

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #26 on: Jun 06, 2018, 07:26:13 AM »
Highly recomend barnes high steer arms. I love them.

In going with SOLID keyed high steer and knuckle.


If you see it, its for sale.

zippo [OP]

  • Online The 1.5K Club
  • **
  • Turtle Points: 534
  • Male Posts: 1,526
  • Member since Nov '08
    • oppiz.net
Re: For Sale - Another build by zippo
« Reply #27 on: Jun 06, 2018, 10:23:16 PM »
So I got some more done today. This is a popular mod on a lot of forums. Na, welded some scrap on the king pins and beat them off. I like that the grease in the pin burns when you weld it.









I cut off all the unneeded brackets. The Driver side perch was badly cracked so it also had to go.



Got the pinion guard on the 14bolt.



If you see it, its for sale.

:)bestgen4runner

  • Online The 1K Club
  • *
  • Turtle Points: 2184
  • Male Posts: 1,496
  • Member since Mar '16
  • Crawling with Marlin
Re: For Sale - Another build by zippo
« Reply #28 on: Jun 07, 2018, 08:21:39 AM »
OMG I love that pinion guard. Looks bad A
One more reason to want a 14bolt.
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

Rockcrawlintoy

  • 4 doors for more whores
  • Offline The 2K Group
  • ***
  • Turtle Points: 1903
  • Male Posts: 2,145
  • Member since Dec '03
  • RIP Kyle
    • Buy me a soda
Re: For Sale - Another build by zippo
« Reply #29 on: Jun 07, 2018, 08:48:35 AM »
OMG I love that pinion guard. Looks bad A
One more reason to want a 14bolt.

what front axle would you run?
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

 
 
 
 
 

Related Topics

1 Replies
1831 Views
Last post Jan 20, 2007, 10:13:46 AM
by toyhunter
732 Replies
116354 Views
Last post Jun 27, 2013, 08:56:35 PM
by 89sastoyo
304 Replies
21229 Views
Last post Jun 26, 2008, 10:17:10 AM
by yota_krawler
48 Replies
17200 Views
Last post Nov 30, 2015, 01:11:55 PM
by Kaos III%
40 Replies
23702 Views
Last post Apr 04, 2015, 11:20:52 PM
by Jason E.