Author Topic: 1988 4 RUNNER PARTING OUT VISALIA, CA (Read 5984 times)

Fiercefirstgen559 · « **on:** Dec 21, 2013, 03:16:41 PM »

all parts located in visalia, ca call or text 559-283-3362. most prices are obo.
complete efi swap. full harness under hood and dash, computer, intake, exhaust to the sensor, fuel tank and lines, inst cluster, distributor, coil and charcoal canister. $450 with complete 22re core

complete swap without the core. $300

power steering components. pump, res, lines, brackets, bolts has advance pod. $85

88 rear axle with 4.10 third member $240

W56 transmission. feels good and tight. SOLD

Top shift tcase with shifter. $150

rear leaf springs. $40

front smittybuilt bumper. not sure of what year it came off of. $60

lots of red interior parts in great shape make offer

hood. $30

drivers side fender. $15

drivers side door. $30

Fiercefirstgen559 · « **Reply #1 on:** Dec 22, 2013, 02:19:38 PM »

W56 sold. Case still available.

Fiercefirstgen559 · « **Reply #2 on:** Dec 23, 2013, 12:31:30 PM »

Fiercefirstgen559 · « **Reply #3 on:** Dec 23, 2013, 12:32:46 PM »

Fiercefirstgen559 · « **Reply #4 on:** Dec 23, 2013, 12:34:15 PM »

84Flatbed · « **Reply #5 on:** Dec 23, 2013, 01:16:03 PM »

Do you have a good working ac compressor? Mines flinging oil out the front.

MAGIC · « **Reply #6 on:** Dec 23, 2013, 05:11:39 PM »

Hey! Do you still have the gas tank? I didn't see it on your list. let me know how much.

Fiercefirstgen559 · « **Reply #7 on:** Dec 23, 2013, 07:05:08 PM »

Quote from: 84Flatbed on Dec 23, 2013, 01:16:03 PM

Do you have a good working ac compressor? Mines flinging oil out the front.

I don't sorry

Fiercefirstgen559 · « **Reply #8 on:** Dec 23, 2013, 07:07:32 PM »

Quote from: Tom Burt on Dec 23, 2013, 05:11:39 PM

Hey! Do you still have the gas tank? I didn't see it on your list. let me know how much.

I've got it listed as part of the swap. I have others as well. Call or text. 559-283-3362

yoshaleng · « **Reply #9 on:** Dec 25, 2013, 12:50:31 AM »

Slowzuk · « **Reply #10 on:** Dec 26, 2013, 09:21:29 AM »

Quote from: 84Flatbed on Dec 23, 2013, 01:16:03 PM

Do you have a good working ac compressor? Mines flinging oil out the front.

I have two of them if you still need one. Located in fresno

84Flatbed · « **Reply #11 on:** Dec 26, 2013, 10:46:44 PM »

Slowzuk Pm sent.

Fiercefirstgen559 · « **Reply #12 on:** Dec 26, 2013, 11:22:59 PM »

Case and drivers door sold

bakotopia · « **Reply #13 on:** Dec 27, 2013, 10:25:05 PM »

Spoke with you on the phone, my name is matt. Im still interested in the steering column shaft from the fire wall to the steering box. Thanks six-six-one 301-4661

Fiercefirstgen559 · « **Reply #14 on:** Dec 27, 2013, 11:30:21 PM »

Matt. Pulling the shaft first thing in the morning. I'll give u a call when its ready to ship. Thanks

steveco. · « **Reply #15 on:** Dec 28, 2013, 10:56:57 AM »

question about the 22re swap. with this swap will it be smog legal if installed correctly?

Fiercefirstgen559 · « **Reply #16 on:** Dec 28, 2013, 01:29:35 PM »

yep. we are including everything needed to swap to efi. will need to be refereed. my 81 has the same setup.

steveco. · « **Reply #17 on:** Dec 28, 2013, 01:55:11 PM »

yea thats what i was looking at for my 80.. need a vin?

Fiercefirstgen559 · « **Reply #18 on:** Dec 28, 2013, 03:23:18 PM »

Quote from: steveco. on Dec 28, 2013, 01:55:11 PM

yea thats what i was looking at for my 80.. need a vin?

what?

steveco. · « **Reply #19 on:** Dec 28, 2013, 05:50:57 PM »

sorry.. i was asking about needing a VIN to register a vehicle with a swapped motor.. im assuming i would need a vin to take it to a referree..

Fiercefirstgen559 · « **Reply #20 on:** Dec 28, 2013, 10:04:46 PM »

The vehicle needs to have its vin. You don't need any info from the doner vehicle. The ref just needs to know what year you are trying to smog as so he can look for all the correct parts. If its an 85 motor and smog equipment it will need to have all the smog parts from the 85.

steveco. · « **Reply #21 on:** Dec 29, 2013, 10:20:01 PM »

darn. i have a rebuilt motor thats in it..

hilux-1983 · « **Reply #22 on:** Jan 06, 2014, 07:18:56 AM »

I'm assuming the motor runs well? How many miles on it? This would be perfect.

Fiercefirstgen559 · « **Reply #23 on:** Jan 06, 2014, 08:03:29 AM »

Quote from: hilux-1983 on Jan 06, 2014, 07:18:56 AM

I'm assuming the motor runs well? How many miles on it? This would be perfect.

This motor does not run. Its locked up. Sale pending on the core.

hilux-1983 · « **Reply #24 on:** Jan 06, 2014, 09:02:22 AM »

Quote from: Fiercefirstgen559 on Jan 06, 2014, 08:03:29 AM

This motor does not run. Its locked up. Sale pending on the core.

Put me next if it falls through. In the mean time. I'm needing a set of good factory rocker arms with adj nuts etc... asap. Got those?

Fiercefirstgen559 · « **Reply #25 on:** Jan 06, 2014, 01:00:17 PM »

Quote from: hilux-1983 on Jan 06, 2014, 09:02:22 AM

Put me next if it falls through. In the mean time. I'm needing a set of good factory rocker arms with adj nuts etc... asap. Got those?

yes i do pm coming

Fiercefirstgen559 · « **Reply #26 on:** Jan 06, 2014, 01:14:10 PM »

hilux-1983 · « **Reply #27 on:** Jan 06, 2014, 02:23:35 PM »

Thanks but those aren't oem. I'm needing the oem ones, thanks

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Fiercefirstgen559 [OP]

Related Topics