Built 87 runner

Started by 87pickup, September 04, 2010, 10:37:13 AM

0 Members and 1 Guest are viewing this topic.

87pickup

Im posting this for my dad who spends most his time up north and doesnt wheel anymore. This 4 runner is in great shape and has only 300 miles on it since being built.

1987 4 runner 146k miles. White exterior and grey interior that is in decent shape
22re runs good but leaks a little oil somewhere
stock w56 transmission shift great
Marlin Crawler dual ultimate transfer cases, 2.28 reduction gears with 23 spline 4.70 geared rear case. cost over $1600 new
Budbuilt budlite crossmember with new factory Toyota t-case mounts
Driveshafts built by High Angle driveline. Cv in rear
Front Axle is a 1984 Toyota Straight Axle with Marlin built hp third, 5.29 gear, detroit locker, longfields, marlin High Steer with 25mm upgrade, longfield hub gears, koyo bearings, ifs calipers and vented rotors, marlin tre's, 1.5' wheel spacers
Front suspension is a Marlin 4" sas
Rear supension is a 5" rear kit
Rear Axle is ifs width. Marlin built v6 third member 5.29 gears, spool, Alloy usa axle shafts, marlin axle bearings and seals, new drum brakes and wheel studs
Wheels are 15x8 Trailready hd's with slim ring and 3.5" bs. Great shape
Tires are 37 12.50 15 Goodyear mtr's (old Style) Near perfect shape
Marlin crawler front and rear bumpers with d rings
Warn Powerplant winch with built in air compressor. Loaded with 125' of Amsteel blue winich rope and a marlin aluminum hawse
Can bak soft top, all stainless frame with Tab sunbrella fabric Paid $1400 for it. No tears or damage

Also have new in box psc hydro assist kith tc pump ready to be installed. this was $900 and hasnt been installed


$7k firm

rockin86runner

very clean runner good luck
85 toy runner tons 4link front and rear ORIs 42 pitbulls

86 runner some other things  pained orange STOLEN REWARD IF FOUND

70 cj-5 renegade1 buick 231 v-6 t-18 dana20 dana 30,44 32in BFG at 

:usa: USN SEABEE EO2 SCW .....We Build.We Fight.We Defend....Hoo-Rah  GOD BLESS OUR TROOPS :usa:

IVrunner

Very nice! Where are you located?
~Josh
-87 4Runner SR5 - SAS, 4.88's, 33 KM2s, Lockright front, elocker rear, frenched hangers, TG in front, 63's in rear (DD)
-2010 4runner Trail (wife DD)
-2000 4runner 4WD manual Highlander -SOLD:(
-1986 Toyota pickup SAS on 35s -SOLD
-1985 4runner (first car) -SOLD

87hillbillyoter

wow im drooling if i had 7k id be all over this. very clean build. glws
:usa:
1987 SAS'ed toyota 4x4 pickup 22re swap
build up- http://board.marlincrawler.com/index.php?topic=75111.0
:usa:

91 ex-cab

why do you guys always post your sick  :moon: runners after i just spent 7k on something else :hammerhead:

84t0y

wowo that is nice, well worth the price IMO

87pickup

Located in Az. If it doesnt sell i think im gonna swap my 3rz r151 and diamonds and keep it for myself.

toygasm

nice 4runner.how far up north does your dad work.bring it up to vancouver bc.i will give ya 7.

partingout

Where in Arizona? I want this I've got 7k cash, I'd like to talk to you about a few things first. Please get back to me ASAP.
Thanks for your time!
-Matt 303-253-1655

toygasm


87pickup


toygasm

 figured i would throw it out there.doesnt hurt to ask.i was lookin at a built runner from cali a few years ago and the owner was totally into comin up but i ended up finding one up here.oh well...if you change your mind let me know :rivers:.bump for a sweet 4runner.

mister

#12
pmed you on Pirate

Thank you, Phil

pumkin toy

bump for a super clean runner!
97 4runner Limited
4runner Build Thread http://board.marlincrawler.com/index.php?topic=54076.1410#lastPost

Started my own fab business recently check out the website  www.c4fabrication.com

also follow C4Fab on facebook for regular updates on projects. http://www.facebook.com/pages/C4-Fabrication/454285357953823

howyadoin

"Flexes like a boneless hooker on muscle relaxers"

mat305

$6500 assuming the interior is in good condition and you want to deliver to fresno,ca.... let me know

87pickup

Quote from: mat305 on September 08, 2010, 07:50:40 PM
$6500 assuming the interior is in good condition and you want to deliver to fresno,ca.... let me know
No thanks.

tawneybuilt

Does it have a cage or AC? Is this runner in Surprise?

87pickup

No cage, just factory roll bar. It has ac but needs to be charged from time to time. and yes its in my garage in surprise.

BoG-ToY

you think it would pass california smog?
my little brother might be interested...

He gave me a budget of about 5k but I told him he couldnt buy the parts that are bolted on this rig for the 7k?
I could build the diffs and duals to save a bit on the bolt on price, but not enough to make it worth it
Sand, what fun, drop pressure to 12psi, stock tires are still digging, can't afford to get stuck, 8psi, still not working. Find a place to GET OUT, air up, un-lock hubs,  WAIT whats this, hubs are UN-LOCKED already. 2wd, 8psi, stock tires, Oregon sand dunes.

18bravo

I'll do $7000 if you can get it to Chico,ca. I will even check on some shipping costs

mister

Shipping will be about $600.00-700.00. Just a quick way to get an idea of cost. there are a ton of shippers. I use a local one I like.

https://www.dasautoshippers.com/Quote_Results.aspx?special=y

18bravo

give me a call when you get a chance so I can get this taken care of. 541-808-1318 mel

have cash and want the runner

atzstng


Toy4rnr


87pickup

decided to keep it for my self for more of a mild wheeler. Im going to put my 3rz,r151, t cases and diamonds on it though and sell what remains.

toygasm

wow...suprised you couldnt sell it :headscratch:.i would have bought it in a second if it was closer..i spent the whole summer lookin for a 4runner.3months and nothing locally.i might just have to look into importing one from the states,but im sure its a pain.

87pickup

Alot of interest from out of state and a couple tire kickers around here, im happy to keep it though especially considering i almost already have 6k for my dad selling parts i didnt need or want and after i swap the parts from my truck i will have a dependable runner with little or no money in it.

BoG-ToY

thats what I was trying to tell my little brother, couldnt buy the parts on this thing for what you were asking for the runner itself.... lol. he was upset when I showed him and said what you dont want to build me one now, I said, I couldnt build half that truck for what hes asking for it
Sand, what fun, drop pressure to 12psi, stock tires are still digging, can't afford to get stuck, 8psi, still not working. Find a place to GET OUT, air up, un-lock hubs,  WAIT whats this, hubs are UN-LOCKED already. 2wd, 8psi, stock tires, Oregon sand dunes.

87pickup

Yea its pricey to build them, my dad has over 14k in parts reciepts alone for it.