$4000 PRICED TO SELL!!
I have a 1988 Toyota for sale
Front axle is a dana 44 shortend to ~64"
-4.10s open
-crossover steering .250 DOM with 7/8 heims
-all new heavy duty ball joints about $250 for the 4 of em
-new warn hubs
-new brake pads and lines
Rear axle is out of a 01 taco has elocker and 4.10s ~61"
currently is in locked position but not wired up
all brackets were cut off and it has new brake lines
motor is a rebuilt 22re out of an 85 probably has around 50k
has stock 2.28/2.28 cases mated wtih a marlin adapter
The cases were recently gone through pulled apart and resealed up.
-Skys X-member
As far as the suspension goes it has wagoneer springs up front and chevys in rear
new bilstein shocks front and rear
The truck itself has a few dents here and there but is in overall good shape. All of the interior is there and both windows roll up and down perfectly.
This truck was built earlier this year with all the above parts, has only seen about a dozen snow runs and a few trips to the river. I built this to wheel but it does drive on the road fine.
As far as the cons :
Crack in windshield
needs smog and reg. is current to last year.
needs drivelines, It does have them but they need to be balanced!!!
Has 17" black steelies with 35" toyos
fronts have 50% and are grooved rears are close to gone
Also has Yukon chromoly shafts on the long side in front. Long side and stub shaft.
Never really had any problems just needs the drivelines balanced, the front is a tube long slip from trail gear.
I have a baby on the way, that is the only reason i am selling. This is a very capable rig and goes just about anywhere just with 35's!
5306805765
Magalia, CA
