1990 hilux crew cab...LHD

[bkfj55]

I have a 1990 hilux crew cab for sale....solid front axle from the factory!

4.3l vortec from 1995 chevy blazer with fresh 4l60e coupled to dual cases w/ marlin adapters.  4" marlin springs and 2" body lift to clear the drivetrain.  Transmission coolers all plumbed.  This was going to be my baby, but once again, life throws you some curveballs every so often.

I have a topper for the rear of the truck, matching white in color.

The front seats were replaced with cloth 4 runner seats when I got it.  This truck originally was a diesel, but was replaced when it started to use more oil than diesel.  it was an L engine, so it wasn't anything too powerful.

Currently, the axles have 5.29 gears in it, but included with the sale are 4.11 thirds with a factory e-locker and a detroit.  Wiring for the elocker is included.  I haven't had much road time in this since the engine was replaced.  Marlin Crawler high steer w/ IFS box.  Headers to brand new cat and exhaust.   I have also mounted an A-pillar gauge that has oil pressure and temperature, in addition to the stock gauges.

Has an ARB front bumper with Warn winch.  Rear tube bumper is set in place, but I need to weld it in for the final fit.  No A/C, maual windows, manual locks.



35" mtr's with a 35" spare on 2" bs wheels

What else is needed?
1. sliders
2. I would think you want to put in the lockers front and rear
3. wheel it!

Located in Harrisonburg, Virginia.

I did not bring this vehicle in, but bought it here in Virginia.  

$9,500 obo



more pictures to come...

[84t0y]

I CAME. wow that is sweet good luck with the sale.

[bkfj55]

It has a 23 spline input on the front case...

Here are some additional photos that I took today:

I need to get the exhaust shop to finish the piece of tubing to go between the engine and the air cleaner...I had a piece of pvc to prototype what they need to make.  There a few wires that need to be wrapped in the final bundle that I'll take care of later this week:





I mounted the drivetrain as high as possible to get a damn near flat belly:



I haven't finished mounting the rear bumper yet...I want to move it up another two inches and then weld it in place:

[thegoofster21]

i love it

[locked 4x4]

that thing is sweet.   If it was a diesel then wouldnt it be smog exzempt?  Good luck on the sale.

[bkfj55]

that thing is sweet.   If it was a diesel then wouldnt it be smog exzempt?  Good luck on the sale.

I have no idea....it could be smog exempt, but I have no idea how the left coast works...over here on the right coast, I just have to pass the state safety inspection in VA

just changed the post because it said RHD, my brain was filled with beer and sorrow, changed it to LHD, the way it should be...

[axled89]

nice ride man.

[uhohhotdog151]

are you interested in trades? like, oh... say, my soul? plus cash?

[bkfj55]

are you interested in trades? like, oh... say, my soul? plus cash?

how about some good karma and $9500


I haven't put the floor mat back in yet....





the previous owner wrote the mph on the plastic :shaking:





the blazer I got the drivetrain out of had a rebuilt engine...so I don't know the actual miles of the engine, but the blazer had 120k on it, so it probably doesn't have too many miles on it...

[46&2]

      

Wish I had the cash... I'd offer to trade you my 4runner but sounds like you need cash. Wow what a cool truck.

[wakkjobb]

  That's one sweet rig... where did you find it? Crew cab solid axle Vortec duals... 

>>Dan

[minicrawlin]

   that truck is     

[bkfj55]

btt....

I just finished the install of the 4xInnovations crossmember/skid plate this past weeked. 

$9k - I need to sell this week!

[snowmoss]

Do You still have the truck? I am interested. Please let me know.

Thanks

[PadawanYota_Stovy]

   dam I want it lol . Too bad its way out of my price rang . That must get lot of props with the 4 doors etc . Good luck on the sale ! 

[dezrik]

I Seriously went to the bank to get a loan for this thing, they didn't understand why I wanted to pay $9000 for a rig that was from 1990 lol. Trying like a mfkr to afford this rig lol.

[PadawanYota_Stovy]

I Seriously went to the bank to get a loan for this thing, they didn't understand why I wanted to pay $9000 for a rig that was from 1990 lol. Trying like a mfkr to afford this rig lol.

Tell them its none of theere freaking business and its one of a kind rig and you wanna look cool driving on and off road !

[64-Hurricane]

The problem for them is pretty obvious, someday, if/when you default on the loan, they're stuck justifying the repo sale of a 1990 hilux registered as a 1985 Toyota truck.  A personal loan, with higher rate probably, is the only route for financing that will probably work.

Or you could go my route, I bought and built my first rig in college by applying for more school loans than I really needed.  Lower interest rate, they don't ask questions either, they love to give you money.  They'll give you more than you and your kids kids will ever pay off.

[64-Hurricane]

BTW, look into getting a dual cab hilux in the states.  This rig is as rare as they get for the US market.  If you searched all day I bet you'd maybe find one or two, none for sale.  Sell a Kidney, buy this truck.

[bkfj55]

yep....it is still for sale...

thanks Hurricane-64 and Padawan...it is a unique truck here in the states.

[yotaneck13]

bump for bad asd mofkn righ man wish i had some dough

[snowmoss]

BKFJ55 I am interested can you contact me directly via email at [email protected]   Thanks Much

[lunasicc]

omg someone buy this thing.. so sick..

[bkfj55]

still for sale.  I took this out on the East Coast 4Runner Jamboree and it did great...no issues at all.

$9k firm

[yotaneck13]

\where are you located again im real interested now

[bkfj55]

located in Virginia...

[motormouth559]

got any new pics or some action vids??? ! nice rig!

[46&2]

Alright so I talked it over with the old lady and she approved me trading my left nut for this... unfortunately I'm not sure its worth 9K... 

[thegoofster21]

Alright so I talked it over with the old lady and she approved me trading my left nut for this... unfortunately I'm not sure its worth 9K... 

[bkfj55]